| 1 x | Ferrita 14x8x5.5 mm |
| 1 x | Ferrita con funda |
| 2 x | Ferrita 17x10x6.5 mm |
| 1 x | Ferrita 27x14x7 mm |
| 2 x | Pine wood slat 2.0x10.0x1000 mm |
| 4 x | Pine wood slat 10x10x1000 mm |
| 3 x | Liston HAYA 10 x 10 x 1000 mm |
| 2 x | BALSA triangular 6x6x1000 mm |
| 3 x | Liston HAYA 8 x 8 x 1000 mm |
| 4 x | Beech dowels 4.0 x 1000 mm |
| 3 x | Pine wood slat 3.0x10.0x1000 mm |
| 3 x | BALSA triangular 8x8x1000 mm |
| 3 x | BALSA triangular 10x10x1000 mm |
| 2 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | BALSA trip 10x10x1000 mm |
| 2 x | Linden wood slat 2.0x2.0x1000 mm |
| 3 x | Pine wood slat 2.0x2.0x1000 mm |
| 3 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 2 x | Beech dowels 10 mm x 1000 mm |
| 3 x | Pine wood slat 1.5x3.0x1000 mm |
| 3 x | Walnut wood slat 2.0x2.0x1000 mm |
| 2 x | BALSA trip 2.0x10.0x1000 mm |
| 2 x | Liston HAYA 3 x 10 x 1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 2 x | BALSA trip 8.0x8.0x1000 mm |
| 3 x | Pine wood slat 3.0x7.0x1000 mm |
| 4 x | OBECHI sheet 2.0x3.0x1000 mm |
| 2 x | BALSA leading edge 8x10x1000 mm |
| 1 x | Pine wood slat 3.0x5.0x1000 mm |
| 2 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 4 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 2 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 2 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | ORACOVER transparent Yellow (10 m) |
| 1 x | Screw-lock connector M2 (2 uds) |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 2 x | Cierre cabina aluminio Ø4, I=10 mm |
| 1 x | Oracover Green10 m |
| 2 x | Oratex Antik 2m |
| 1 x | Xplorer4 anemometro |
| 2 x | Papel japones 12 grs/m2 760x510 mm JAPICO |
| 2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 3 x | Cabin latch Fox MDM1 4m (pair) |
| 2 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | PROFICOVER 5m |
| 1 x | Ply-Span 450x600/13g White |
| 1 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 1 x | Ply-Span 450x600/13g Yellow |
| 2 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Oracover Azul Cielo 2 m |
| 1 x | Oratex White 2m |
| 1 x | Oracover Brown 2 m |
| 1 x | Ply-Span 450x600/13g Black |
| 1 x | Oracover Yellow CUB 10 m |
| 1 x | Oracover Yellow CADMIO 10 m |
| 1 x | Ply-Span 450x600/13g Red |
| 1 x | Covered closure or fairings |
| 2 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Canopy Latch |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | Oracover Black 2 m |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | 1/7 Pilot "Japanese" |
| 1 x | 1/4 Pilot "Mike" |
| 1 x | 6 mm red aluminium threaded horn with patella |
| 1 x | LH long black aluminium horn L31xH30 (2pcs) |
| 1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
| 1 x | SlowFlyer control horn (3 pcs) |
| 1 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
| 1 x | Brass control horn M2 short for wire (2 pcs) |
| 1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
| 1 x | Horn 13,5x16 mm (2 pcs) |
| 1 x | Brass control horn M4 short for wire (10pcs) |
| 1 x | Piloto jet 130 mm |
| 1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
| 1 x | Brass control horn M4 short for wire (4 pcs) |
| 4 x | Rescue 1,8m2 / BackPack |
| 2 x | LUCAS pilot ARTF |
| 2 x | Ballast 700gr OPALE |
| 1 x | Windsock Ozone L - 700 mm |
| 2 x | Opale Rucksack |
| 1 x | Para-RC Mix |
| 2 x | Trike XL motor set (motor+esc+prop) |
| 2 x | Wing OXY 5,0 m2 |
| 2 x | Parachute P4 |
| 2 x | Parachute BACKUP X100 |
| 2 x | Paramotor Kit Camo H1.5/ Ben Red |
| 2 x | Paramotor Trike XL |
| 3 x | Aramid 50 daN 50 m |
| 1 x | MAX pilot ARTF |
| 2 x | Windsock Ozone L -1200 mm |
| 1 x | LOWER TOW HOOK |
| 1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | Ball Link Plier |
| 1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 1 x | Indoor hinge with servo arm integraded |
| 1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
| 3 x | Linden wood slat 3.0x3.0x1000 mm |
| 2 x | Birch plywood plate 600x300x2.5 mm |
| 2 x | Lite Plywood panel 600x300x3.0 mm |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
| 1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | 6,4x1000 mm 2:1 green termoretract tube |
| 2 x | 4 LiPo XH>EH adapter |
| 2 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
| 1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
| 1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
| 1 x | PVC yellow-orange transparent battery termo-retract 57 mm (1 m) |
| 1 x | 6,4x1000 mm 2:1 black termoretract tube |
| 1 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
| 1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
| 1 x | 30 cm BEC cable (female) |
| 1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 1 x | 1,6x1000 mm 2:1 black termoretract tube |
| 2 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
| 1 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
| 2 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Landing gear frontal support 25x32x16 |
| 1 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
| 1 x | 11 mm Rubber pads (14 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
| 1 x | Wheel collar 4 mm Ø (4 uds) |
| 1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
| 3 x | White silicone 0,25 mm² wire (25 m) |
| 1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
| 1 x | Pushrod octagone 4/3 with coupler M3 |
| 2 x | 2,4x1000 mm 2:1 green termoretract tube |
| 1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
| 2 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
| 1 x | MYLAR film A350 (1000x500 mm) |
| 1 x | Allen wheel collar M3x3 |
| 1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 2 x | Set cintas unión paracaídas 145 cm |
| 2 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | Paramotor BackPack XXS (without accessories) |
| 1 x | Para-RC "RC-Evo-Cross" Rescue |
| 1 x | Ventus 1:4 set of instruments |
| 1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
| 2 x | BALSA triangular 15x15x1000 mm |
| 2 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
| 1 x | Absorver mount set for 5-10 Kg models |
| 1 x | Paramotor BackPack XXS 2 |
| 2 x | Optical RPM Sensor |
| 1 x | AL Axle Shaft 4.0x16 mm (2 uds) |
| 1 x | 300 Newtons FEMA absorber |
| 1 x | 150 Newtons FEMA absorber |
| 1 x | 15x7 tree blades propeller LEFT |
| 1 x | Propeller electric carbon 6.5x4 |
| 1 x | Pine wood slat 5.0x5.0x1000 mm |
| 1 x | Propeller electric carbon 9.5x6 |
| 1 x | Propeller electric carbon 7x7 |
| 1 x | Propeller POWER-PROP 13x9 Izda |
| 1 x | 8x6 tree blades propeller |
| 1 x | Propeller electric carbon 10.5x8 |
| 1 x | Propeller electric carbon 10.5x6 |
| 1 x | Propeller POWER-PROP 13x8 |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | Birch plywood plate 600x300x1.5 mm |
| 1 x | Lite Plywood panel 600x300x2.0 mm |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 2 x | Beech dowels 3.0 x 1000 mm |
| 3 x | Pine wood slat 6.0x6.0x1000 mm |
| 2 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
| 2 x | Birch plywood plate 600x300x3.0 mm |
| 2 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | Birch plywood plate 600x300x1.2 mm |
| 1 x | Propeller Pleg CAM-Prop 10x6 + Spinner |
| 1 x | Propeller Pleg CAM-Prop 8x6 |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 2 x | Balsa panel 1.5x100x1000 mm |
| 1 x | Balsa panel 1.0x100x1000 mm |
| 2 x | Connectors banna oro 2 mm (M/F) |
| 1 x | Actuador lineal HLS12-100210-7.4v |
| 1 x | Silicone black 6,0 qmm wire (25 m) |
| 1 x | wing/fuselage connector for 3 pines AWG 20-24 |
| 1 x | Conector JR Servo male (10 pcs) |
| 1 x | 50m servo "Premium" wire (white/red/blue) |
| 1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | White silicone 0,25 qmm wire (100 m) |
| 1 x | Black silicone 0,25 mm² wire (25 m) |
| 1 x | PVC 0,08 qmm Graupner servos wire (5 m) |
| 1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
| 1 x | Cable grommet Ø 4 mm (4 uds) |
| 1 x | 80 mm rods set for direction control |
| 1 x | Silicone black 1,0 qmm wire (100 m) |
| 1 x | Silicone red 1,0 qmm wire (100 m) |
| 1 x | 45 mm rods + T patellas set for direction control |
| 1 x | XH female balance (6S) connector (2 pcs) |
| 1 x | Clip mini fixing for wing (2 pcs) |
| 1 x | Battery EMCOTEC LiIon 3000 7.2v |
| 1 x | Fresa corte diamante Ø 2.3mm (bola) |
| 1 x | Optotronix Aurora Plug |
| 1 x | DPSI RV Mini 6 Magic |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | 12V Car Adapter |
| 1 x | DPSI Micro MPS |
| 1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
| 1 x | BlueCom™ Adapter (iOS) |
| 1 x | Extension silicon 30 cm male (Graupner) |
| 1 x | DPSI Ampere battery backer |
| 1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
| 1 x | Magnetic Connect locking system |
| 1 x | 200m servo "Premium" wire (white/red/blue) |
| 1 x | Silicone red 0,25 mm² wire (25 m) |
| 1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
| 1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
| 1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
| 1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | Motor Mega AC 16/15/03 |
| 1 x | PYRO 700-45 Long Axi |
| 1 x | AXI 2826/10 V2 Long |
| 1 x | AXI 2814/10 V2 Long |
| 1 x | PYRO 750-50L Competition |
| 1 x | Motor XPOWER F2919/10 F5J Light |
| 1 x | Lipo GENS 2300 6.6v 2s1p Li-Fe Pack emisora |
| 1 x | Slider Extenion for CORE |
| 1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
| 1 x | Parachute PV6 for F3J |
| 1 x | PYRO 800-40 Long Axi |
| 1 x | Motor Mega AC 16/15/07 |
| 1 x | AXI 2820/10 V2 |
| 1 x | AXI 2217/12 V2 |
| 1 x | MAMBO 17 |
| 1 x | KIRA 600-17 |
| 1 x | Motor Mega AC 16/25/04 |
| 1 x | PYRO 700-56L |
| 1 x | AXI 2808/20 V2 |
| 1 x | KIRA 400-34 |
| 1 x | KIRA 480-34 |
| 1 x | KONDOR 15-92 |
| 1 x | KIRA 400-39 5,2:1 |
| 1 x | Motor Mega AC 16/15/02 |
| 1 x | XPower XC3522/5 LS |
| 1 x | FUTABA T10 J T-FHSS |
| 1 x | Futaba SBS-02A Air Pressure Telemetry Sensor (FASSTest/T-FHSS) |
| 1 x | Futaba FX36 2.4GHz FASST Test + R7008SB |
| 1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
| 1 x | DYNAMOMETER S-1580 |
| 1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
| 1 x | Balsa panel 2.5x100x1000 mm |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | Transmitter SPEKTRUM DX-9 (Only TX) |
| 1 x | A/C quality beech plywood 600x300x0.6 mm |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | Balsa panel 2.0x100x1000 mm |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | Balsa panel 4.0x100x1000 mm |
 |
| 20,297.73EUR |
