| 2 x | Canopy Lock V1 M3 Red (2 pcs) |
| 2 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 2 x | Locking cable tie 3.2x142 (uds) |
| 3 x | Screw-lock connector M2 (2 uds) |
| 2 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 2 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 3 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 5 x | Steering arm 12 mm Ø 4 mm |
| 2 x | Cockpit plastic closing |
| 1 x | Cockpit metalic closing |
| 3 x | Steering arm 16 mm Ø 4 mm |
| 2 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 2 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 2 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 1 x | Cockpit aluminium closing |
| 3 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | SUS wire 3m (nylon coated) |
| 2 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 2 x | Screw-lock connector Ø 2 mm (2 uds) |
| 2 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 3 x | Covered closure or fairings |
| 3 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 3 x | Locking cable tie 4.6x203 (uds) |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 3 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
| 2 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
| 1 x | One touch canopy lock |
| 1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
| 2 x | ABS tube 7.0x6.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
| 2 x | ABS tube 5.0x4.0x156 mm |
| 2 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
| 1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
| 1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
| 1 x | ABS tube 10.0x8.0x1000 mm |
| 1 x | ABS tube 3.0x1.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
| 1 x | ABS tube 4.0x3.0x1000 mm |
| 1 x | ABS tube 8.0x6.0x1000 mm |
| 2 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
| 2 x | ABS tube 14.0x10.0x1000 mm |
| 2 x | ABS tube 9.0x7.0x1000 mm |
| 1 x | ABS tube 12.0x10.0x1000 mm |
| 1 x | ABS tube 3.0x2.0x1000 mm |
| 2 x | ABS tube 18.0x16.0x1000 mm |
| 1 x | Threaded coupler M2 (10 uds) |
| 2 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 2 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 3 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
| 1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 1 x | Couple M4 for wire (10 pcs) |
| 2 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 2 x | Flap hinge 33x9 mm (6 pcs) |
| 1 x | Gates hinge aluminium (1 pcs) |
| 2 x | Ball Link ALU M3 - RH (1 pcs) |
| 2 x | Aluminium red ball links M3 V1 (10 pcs) |
| 1 x | Gates hinge |
| 2 x | Brass ball links BS M3 V1 (10 pcs) |
| 1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 1 x | Micro flex hinge (12 uds) |
| 1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
| 1 x | Miniature brass strap hinge, 1 m |
| 1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
| 2 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 1 x | Ball link Aluminio M3 (2 pcs) |
| 2 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
| 1 x | Flap hinge (6 pcs) |
| 1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
| 1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 1 x | 18 mm reinforced hinge |
| 1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
| 2 x | Kwik link AL M3 con Clip (2 pcs) |
| 1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
| 1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 2 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
| 1 x | Angled clevis with threaded rod M3 |
| 1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
| 1 x | Gates hinge 30x16 mm (2 pcs) |
| 1 x | Pin type hinge Al 6x98 mm (2 pcs) |
| 2 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
| 1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 2 x | Ring 320 mm length (5 pcs) |
| 1 x | Angle of incidence meter |
| 1 x | 20x1000 mm Ring Strap Back To Back |
| 1 x | SE Ring HACKER 300 mm (2 pcs) |
| 2 x | SE Ring 200 mm (2 pcs) |
| 1 x | Propeller balancer |
| 2 x | 20x200 mm battery rings |
| 1 x | Marker ties (20 pcs) |
| 2 x | Tape GFK 50 mm |
| 1 x | Medidor ángulos y/o incidencias |
| 1 x | XH female balance (2S) connector (2 pcs) |
| 1 x | Connectors banna oro 6,0 mm (M/F) |
| 1 x | Conector BEC female (10 pcs) |
| 1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
| 1 x | XH male balance (2S) connector (2 pcs) |
| 2 x | Connectors banna oro 3,5 mm (M/F) |
| 1 x | XH female balance (5S) connector (2 pcs) |
| 2 x | Connectors banna oro 2 mm (M/F) |
| 1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
| 1 x | 30 cm DEANS female connector |
| 1 x | 2 mm female connector (2 pcs) with safety connector |
| 1 x | Conector BEC male (10 pcs) |
| 1 x | XH male balance (5S) connector (2 pcs) |
| 1 x | Connectors banna oro 0,8 mm (M/F) |
| 1 x | Wing connector 8pin with pin strip, plug & socket |
| 1 x | XH female balance (4S) connector (2 pcs) |
| 1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
| 1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
| 1 x | Gold antispark 4 mm plug |
| 2 x | Connectors banna oro 3 mm (M/F) |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | 30 cm BEC cable (male) |
| 1 x | Adapter lead MPX/EC3 |
| 2 x | CC 03 |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
| 2 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | CC 05 |
| 1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | CC 02 |
| 1 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 1 x | 30 cm BEC cable (female) |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 2 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | JETImodel SINGLE BEC |
| 2 x | TP/TopFuel - XH 2/3S Adapter |
| 2 x | Circlick securite |
| 1 x | CC 01 |
| 1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 3 x | Steering arm 16 mm Ø 3 mm |
| 1 x | Flat Connector 4.0 mm x 1000 mm |
| 1 x | ABS "T" angle 10.0x10.0x1000 mm |
| 1 x | Cable grommet Ø 5 mm (4 uds) |
| 2 x | 28x5 mm wires output (2 pcs) |
| 1 x | Landing gear frontal support 29x26x13,5 |
| 1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
| 1 x | Snap for floding prop for 2 mm axi |
| 1 x | Allen wheel collar M3x5 |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | U Profile ABS 5,0x10,0x1000 mm |
| 2 x | Snap short M2 (10 uds) |
| 1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
| 2 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 2 x | U Profile ABS 1,0x2,0x1000 mm |
| 2 x | T-Connector 4.0 mm x 1000 mm |
| 1 x | L-Connector 1.5 mm x 1000 mm |
| 1 x | ABS angle 2,0x2,0x1000 mm |
| 1 x | 41x5,5 mm wires output (2 pcs) |
| 1 x | ABS "T" angle 6.0x6.0x1000 mm |
| 2 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
| 1 x | ABS "T" angle 4.0x4.0x1000 mm |
| 1 x | Profile ABS Square 1 x 1000 mm |
| 1 x | ABS "T" angle 8.0x8.0x1000 mm |
| 1 x | ABS angle 4,0x4,0x1000 mm |
| 1 x | Cable grommet Ø 6.4 mm (4 uds) |
| 1 x | Brass rod Ø 1.5 mm x 1000 mm |
| 1 x | Extinguisher CO2 - 2 Kg |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
| 2 x | Aluminun wheel collar 5 mm Ø (4 uds) |
| 1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
| 1 x | Adapter 3,2 mm M6 for spinner 40 mm fixed propeller |
| 1 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
| 2 x | Aluminun wheel collar 2 mm Ø (4 uds) |
| 1 x | Support ECU Xicoy X-45 |
| 1 x | Pushrod octagone 3/2 |
| 1 x | Allen wheel collar M3x3 |
| 1 x | Landing gear frontal support 25x32x16 |
| 1 x | Wheel collar 3.5 mm Ø (4 uds) |
| 2 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
| 1 x | 11 mm Rubber pads (14 pcs) |
| 1 x | Soporte filtro FESTO (4 pcs) |
| 1 x | Pushrod greyline 4/3 with coupler M3 |
| 2 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
| 1 x | ABS tube 6.0x5.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
| 1 x | EVP Unit for AXI2208/xx and 2212/xx |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Canopy Latch |
| 1 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
| 2 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
| 1 x | ABS tube 8.0x7.0x1000 mm |
| 1 x | Pulley brass 14/2 (2 pcs) |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | wire tensioner (blue) |
| 2 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 2 x | Dean "T" - Futaba Adapter |
| 1 x | Cable coupler M2 (10 uds) |
| 1 x | Profile ABS Square 2 x 1000 mm |
| 1 x | Profile ABS half cane 2.5x1000 mm |
| 1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
| 1 x | Rubber profile 6-2 mm 2M |
| 2 x | Long pinned hinge (12 uds) |
| 1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
| 1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
| 1 x | Antonov AN2 Scale 1/6 - 3m |
| 1 x | Porta Kwik link M3 3 mm (2 pcs) |
| 1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
| 1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
| 2 x | Small pinned hinge (12 uds) |
| 1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
| 1 x | Aluminium blue ball links M3 V1 (10 pcs) |
| 1 x | Tape GFK 38 mm |
| 1 x | Kwik link with arm M3xM2xL24 |
| 1 x | Pulley brass 10/2 (2 pcs) |
| 1 x | Foil for sticking flaps and ailerons |
| 1 x | Black large kwik link (10 pcs) |
| 3 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
| 1 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
| 1 x | Cable coupler M2,5 (2 pcs) |
| 1 x | Propeller balancer |
| 1 x | Cable coupler M2x66 (2 uds) |
| 1 x | Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs) |
| 1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
| 1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
| 1 x | Kwik link with arm M5xM2,5xL30 |
| 1 x | Spikes Band (5 m) |
| 1 x | Cierre cabina aluminio Ø4, I=10 mm |
| 1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Field folding model stand |
| 1 x | XH male balance (4S) connector (2 pcs) |
| 1 x | Connectors DEANS (T) micro |
| 2 x | PIN Connector female (100 pcs) |
| 1 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
| 1 x | Wing conexion 2 servos JR/Graupner 50 cm |
| 1 x | Bag connector 2 mm |
| 1 x | XH male balance (6S) connector (2 pcs) |
| 1 x | Electronic switch JETI SP6 0-15v/6A |
| 1 x | XT-60 connector (female) |
| 1 x | Connectors MPX black female |
| 2 x | XH female balance (3S) connector (2 pcs) |
| 1 x | Mounting frame MPX male connector |
| 1 x | Connectors DEANS (T) |
| 1 x | MPX screwable clips (4 pcs) |
| 1 x | Connectors MPX 8 pins (green) 1 pair (male-female) |
| 1 x | XH female balance (8S) connector (2 pcs) |
| 1 x | UBEC 6A KAVAN |
| 1 x | XH male balance (3S) connector (2 pcs) |
| 1 x | Extension 2/3 lipos JST/C |
| 1 x | XH female balance (6S) connector (2 pcs) |
| 1 x | SPS Remote switch actuator |
| 1 x | MPX Sub-D Adaptor |
| 1 x | MAX BEC |
| 1 x | Protector Connector Dean-T (1 pair) |
| 1 x | Connectors banna oro 8,0 mm (M/F) |
| 1 x | JETImodel DPS 40 |
| 1 x | Extension 5 lipos JST/C - JST |
| 1 x | 2 mm male connector (2 pcs) with safety connector |
| 1 x | XT-90 connector (pair) |
| 1 x | MR30 connector male |
| 1 x | Connectors MPX black male |
| 1 x | MR30 connector female |
| 1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
| 1 x | Extension 5 lipos JST - JST/C |
| 1 x | Long Switch On/Off micro |
| 1 x | BEC 3A FOXY |
| 1 x | SWTU2 switch |
| 1 x | Prolonguer for Balancer Thunder Power 6S |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | Multi-adapter balancer JST - TP |
| 1 x | Rubber profile 8-2 mm 2M |
| 1 x | 80 mm rods set for direction control |
| 1 x | Rubber profile 10-2 mm 2M |
| 1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
| 2 x | L-Connector 1.0 mm x 1000 mm |
| 2 x | Profile ABS half cane 4x2.5x1000 mm |
| 1 x | Profile ABS half cane 6.0x1000 mm |
| 2 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
| 1 x | Profile ABS Square 3 x 1000 mm |
| 1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
| 1 x | Wheel collar 5 mm Ø (4 uds) |
| 1 x | Profile ABS half cane 3x1000 mm |
| 1 x | Electric Landing Gear ODYSSEY +GS200 (Elektron Retracts) |
| 1 x | Wheel 115 mm with electromagnet and brake disk + E-Brake (2 uds) |
| 1 x | RB-45 Electronic |
| 1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | Circlik for shaft 1.5 mm (10 pcs) |
| 1 x | Cable tie mounts 4.3 (4 uds) |
| 1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
| 1 x | Wings Bags JEEMO |
| 1 x | XICOY X45 rail |
| 1 x | Set stickers JEEMO "Andy" |
| 1 x | JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT |
| 1 x | JEEMO Kit ARF Basic (2 color) - XTRALIGHT |
| 1 x | Jeemo Dolly |
| 1 x | ER-40eVo Set A [2x ER40 + RB-45] |
| 1 x | ER-50eVo Set A [2x ER50 + RB-45] |
| 1 x | Electric Landing Gear GS-200 BULL Mo1 2.6 (Elektron Retracts) |
| 1 x | Brake disc Electron Retracts |
| 1 x | E_brakes electronics |
| 1 x | Electric Landing Gear ASPIRE (Elektron Retracts) |
| 1 x | GS-200 Electronic |
| 1 x | Retract/Brake Cable |
| 1 x | ER40 Front Leg (with wheel 80mm) |
| 1 x | Manual Controller |
| 1 x | Wheel 75 mm with electromagnet and brake disk (2 uds) |
| 1 x | Wheel 115 mm with electromagnet and brake disk (2 uds) |
| 1 x | Electric Landing Gear "Black Edition" BULL Mo1 2.6 (Elektron Re |
| 1 x | Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re |
| 1 x | Nose wheel 62 mm |
| 1 x | ER-40eVo Set B [Complet Set + GS200] |
| 1 x | RS-200 Touch Programmer |
| 1 x | Wheel Ø 75 mm (1 ud) Electron Retracts |
| 1 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
| 1 x | Pushrod octagone 3/2 with coupler M2 |
| 1 x | Cockpit latch closing I=10 mm |
| 1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
| 1 x | Wheel collar 4 mm Ø (4 uds) |
| 1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
| 1 x | Pushrod octagone 4/3 with coupler M3 |
| 1 x | Large flex hinge (12 uds) |
| 1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
| 1 x | Small pinned hinge (6 uds) |
| 1 x | Circlik for shaft 3.2 mm (10 pcs) |
| 1 x | Circlik for shaft 1.9 mm (10 pcs) |
| 1 x | Clip mini fixing for wing (2 pcs) |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | 6x4 tree blades propeller |
| 1 x | 12x6 tree blades propeller |
| 1 x | 10 mm portholes (10 pcs) |
| 1 x | FIALA Propeller 19x12 Electric |
| 1 x | 290 mm M5 Prop shaft |
| 1 x | Rudder 107-06 |
| 1 x | Propeller RABOESCH M4 45 mm (3 Blades pr) (Right hydropropeller) |
| 1 x | Spare Shaft Ø4mm L:450x18mm M4 |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
| 1 x | EWC3 40 cm wing connector |
| 1 x | Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
| 1 x | Male connector JST SH 1.0mm with 10 cm wire |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
| 1 x | CM-3 |
| 1 x | Bidule 170 ARF 3.48 m |
| 1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
| 1 x | Ball link duraluminium M3 V1 (10 pcs) |
| 1 x | 3 mm Leader (L 100 mm) |
| 1 x | Propeller POWER-PROP 10x6 |
| 1 x | Porpeller HUNTER 480 |
| 1 x | 290 mm 8x4 M4 shaft ship |
| 1 x | Propeller electric carbon 10.5x7 |
| 1 x | Propeller POWER-PROP 13x9 |
| 2 x | 16x10 tree blades propeller Master Airscrew |
| 1 x | Porpeller HUNTER 400 |
| 1 x | 12 mm mast holder |
| 1 x | 12 mm portholes (10 pcs) |
| 1 x | 290 mm M4/4 mm Prop shaft |
| 1 x | Propeller RABOESCH M3 50 mm (3 Blades pr) (Right hydropropeller) |
| 1 x | Spare Shaft Ø4mm L:450x23mm M4 |
| 1 x | Rigid coupling brass Ø 2 mm L: 15 mm |
| 1 x | Rigid coupling brass Ø 4.0 / 3.2 mm L: 25 mm |
| 1 x | Rigid coupling brass Ø 4 mm L: 25 mm |
| 1 x | Propeller RABOESCH M4 40 mm (3 Blades) (Right hydropropeller) |
| 1 x | CA Glue (medium) 20g |
| 1 x | Double conector with JR adapter and 200 mm extension |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | Carbon tube (L 2000 mm, Ø16 mm, Ø14 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | Carbon roving DowAksa / 24k / 1600 tex |
| 1 x | SPARK Switch 7.4v |
| 1 x | Mixing tube for double syringes and cartridges (MR 1:1 and 2:1) |
| 1 x | Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm) |
| 1 x | wing/fuselage connector for 12 pines AWG 20-24 |
| 1 x | Female connector for 16 pines AWG |
| 1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Foaming agent for epoxy resins 200 g |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | Short Switch On/Off micro |
| 1 x | Female connector for 10 pines AWG |
| 1 x | Hacker X-Pro USB interface V2 |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | Male connector for 6 pines AWG |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | Female connector JST SH 1.0mm with 10 cm wire |
| 1 x | CA Glue fast 20g |
| 1 x | JETImodel Addcap 1640 |
| 1 x | Cyanocrylate MD GA460 odourless 20g |
| 1 x | Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm) |
| 1 x | Three-position switched channel, short |
| 1 x | Axle for motor A20-S (3 uds) |
| 1 x | Wire easy tensioner (silver) |
| 1 x | MIG 29 EDF |
| 1 x | TrainerCord (master-learner) |
| 1 x | SBEC 30 D |
| 1 x | PWC4 wing/fuselage connector for 4 servos |
| 1 x | PowerBox SparkSwitch RS |
| 1 x | PSC 5 |
| 1 x | Servo slow down unit (0,7-14,7 sec ) |
| 1 x | Fully Threaded Steel Rod M3 |
| 1 x | ABS angle 10,0x10,0x1000 mm |
| 1 x | ABS angle 1.5x1.5x1000 mm |
| 1 x | Profile ABS triangular 2.0x1000 mm 90º |
| 1 x | ABS "T" angle 2.0x2.0x1000 mm |
| 1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
| 1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
| 1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
| 1 x | Pin hinge 34x16 mm (10 uds) |
| 1 x | Indoor hinge with servo arm integraded |
| 1 x | Round Rod 1.0x3.5 cm |
| 1 x | Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs) |
| 1 x | Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs) |
| 1 x | Micro clevis 0.8 mm(10 uds) |
| 1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
| 1 x | Battery LiFe TopFuel 3100 mAh 4s MTAG 30C |
| 1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
| 1 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
| 1 x | Stainless steel 4 m Pull-Pull complet set (max 20 kg) |
 |
| 21,745.71EUR |
