| 1 x | Interface Realflight Simulator |
| 1 x | SIMtransmitter 6 Mode 2 |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | Pine wood slat 10x10x1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 2 x | BALSA trip 3.0x3.0x1000 mm |
| 2 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
| 1 x | BALSA triangular 8x8x1000 mm |
| 2 x | Liston HAYA 8 x 8 x 1000 mm |
| 2 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | BALSA triangular 10x10x1000 mm |
| 2 x | Straightened rod Ø 1.5 mm x 1500 mm |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 2 x | Aluminium rod Ø 4.0 mm x 3000 mm |
| 1 x | Brass rod Ø 1.0 mm x 1000 mm |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | BALSA trip 10x10x1000 mm |
| 2 x | Straightened rod Ø 8.0 mm x 1000 mm |
| 2 x | Straightened rod Ø 7.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 3.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 5.0 mm x 1000 mm |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | Cockpit plastic closing |
| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 1 x | Cierre cabina aluminio Ø4, I=10 mm |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | ESC RAY G2 R-20B BEC |
| 1 x | ESC PULSAR A-40 |
| 2 x | Regulador Hobbywing Platinum PRO 130A-HV V4 |
| 1 x | ESC RAY G2 R-60SB SBEC |
| 1 x | Horn 6/27 with M3 Bearing |
| 1 x | 2 mm male connector (2 pcs) with safety connector |
| 1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
| 1 x | Conector FUTABA Servo female (10 pcs) |
| 1 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
| 1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | 10 mm Quick clamp_L (6 pcs) |
| 1 x | Extension silicon 50 cm (Futaba) |
| 1 x | Festo 4mm Tubing Holder (10 uds) |
| 1 x | Metal ring front FEMA |
| 1 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
| 3 x | Actuator Electric 25 mm |
| 2 x | Straightened rod Ø 6.0 mm x 1000 mm |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 2 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | Straightened rod Ø 2.5 mm x 1000 mm |
| 1 x | Simulador RealFlight RF-9.5 S (sin emisora) |
| 2 x | Brass rod Ø 0.8 mm x 1000 mm |
| 2 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 2 x | Brass rod Ø 0.5 mm x 1000 mm |
| 1 x | Brass rod Ø 1.5 mm x 1000 mm |
| 1 x | Straightened rod Ø 1.2 mm x 1500 mm |
| 3 x | Straightened rod Ø 1.5 mm x 1000 mm |
| 2 x | Straightened rod Ø 1.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 4.0 mm x 1000 mm |
| 1 x | Birch plywood plate 600x300x2.5 mm |
| 1 x | Straightened rod Ø 2.0 mm x 1000 mm |
| 1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 2 x | Straightened rod Ø 14.0 mm x 1000 mm |
| 2 x | Straightened rod Ø 4.5 mm x 1000 mm |
| 1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
| 2 x | NF-3m Heli Kit |
| 1 x | Resistor 3W 5% 2R2 |
| 1 x | 120x60 mm SLH KOVO wheel |
| 1 x | Jet Afterburner Simulator NF-Jet2YY Set |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | Styrene plate 320x120x1.0 mm |
| 1 x | Resistor 3W 5% OR82 |
| 1 x | NF-3X-80 liner Kit |
| 1 x | Electric Landing Gear "Black Edition" ULTIMATUM 2.0 (Elektron Re |
| 2 x | Xplorer1 anemometro |
| 2 x | Xplorer2 anemometro |
| 1 x | Electric Landing Gear "Black Edition" BULL Mo1 2.6 (Elektron Re |
| 2 x | ER40 Front Leg (with wheel 80mm) |
| 1 x | Head core |
| 1 x | Head lower part New |
| 2 x | LA500 rotor head shaft |
| 1 x | Washer 2.2×4 |
| 1 x | Rotorshape Autogyro |
| 1 x | Head runner |
| 1 x | Cooler motor type 300 |
| 1 x | Size "L" motor holder for class 600 |
| 1 x | Cap Hispano Aviación |
| 3 x | Shirt Hispano Aviación |
| 3 x | Electric Landing Gear ASPIRE (Elektron Retracts) |
| 1 x | Electric Landing Gear ODYSSEY +GS200 (Elektron Retracts) |
| 1 x | 10-15mm Servo Arm HITEC |
| 1 x | E_brakes electronics |
| 2 x | Xplorer4 anemometro |
| 2 x | Actuator Electric 25 mm HIGH TORQUE |
| 1 x | ER-40eVo Set A [2x ER40 + RB-45] |
| 2 x | 20-25mm Servo Arm |
| 2 x | Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re |
| 3 x | ER-40eVo Set B [Complet Set + GS200] |
| 1 x | Electric Landing Gear "Black Edition" BULL Mo1 2.6 GS200 (Electr |
| 1 x | Electric Landing Gear ULTIMATUM 2.0 (Elektron Retracts) |
| 1 x | Electric Landing Gear RS-200 w/o programmer ULTIMATUM 2.0 (Elekt |
| 2 x | Brake disc Electron Retracts |
| 1 x | Nose leg 155 mm with wheels 70 mm |
| 1 x | GS-200 Electronic |
| 1 x | Ball Link ALU M3 - RH (1 pcs) |
| 1 x | 10-15mm Servo Arm |
| 2 x | ER-50eVo Set A [2x ER50 + RB-45] |
| 1 x | Balls 4 mm |
| 1 x | Raer wall |
| 1 x | LA500 tail empennage |
| 2 x | Pilot LA 500 |
| 1 x | Motor rotor LA-500 |
| 1 x | Ball joint long |
| 1 x | Rotorshape Elevator |
| 1 x | Blades 330mm |
| 1 x | Cierva C30 Elevator |
| 1 x | Bearing housing |
| 1 x | LA500 housing-lower cyclic |
| 1 x | Size "M" motor holder for class 600 |
| 1 x | Indoor motor holder |
| 1 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
| 1 x | Ø 28 mm fiberglass motor-holder for electric motors |
| 1 x | Receiver bed (Blue) |
| 1 x | Electric Landing Gear ODYSSEY (Elektron Retracts) |
| 1 x | Size "M" motor holder for class 400 |
| 1 x | Lipo RAY 2200 mAh 2s 7.4v 30C |
| 1 x | FOXY G2 C3530-700 |
| 1 x | Program card KAVAN PRO |
| 1 x | Carbon plate 350x150x1.0 mm |
| 1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
| 1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | Helices DJI Mavic Air STEALTH "Black" (4x Ud) |
| 1 x | Landing gear Rocket 400 |
| 1 x | Fiberglass 280 g/m² 5000x1000 mm |
| 1 x | Fiberglass plate 350x150x4.0 mm |
| 1 x | DYNAMOMETER S-1580 |
| 1 x | Chopped glass fibre strands 3 mm |
| 1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
| 1 x | Carbon plate 550x350x3.0 mm ECOTECH |
| 1 x | NF-1 RC set |
| 1 x | RF9 Flight Simulator with Spektrum Controller |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | Balsa panel 4.0x100x1000 mm |
| 1 x | Balsa panel 10x100x1000 mm |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | Balsa panel 1.0x100x1000 mm |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | Propeller set 400 (2R+2L) |
| 1 x | Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi |
| 1 x | FA27.2×8.9 Prop-2PCS/PAIR |
| 1 x | P 17×5.8 Prop-2PCS/PAIR |
| 1 x | Fiberglass 5000x1100 mm 49 g/m² |
| 1 x | Fiberglass plate 620x540x0,3 mm |
| 1 x | Chopped glass fibre strands 0.2 mm |
| 1 x | Carbon roving DowAksa / 24k / 1600 tex |
| 1 x | Fiberglass plate 620x540x0,2 mm |
| 1 x | Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain) |
| 1 x | Fiberglass 163 g/m² 1m x 5 m (Twill) |
| 1 x | Fiberglass plate 350x150x3.0 mm |
| 1 x | Fiberglass plate 620x540x3,2 mm |
| 1 x | ESC MEZON 120 Lite |
| 1 x | ESC MEZON 115 Opto |
| 1 x | Jet Afterburner Simulator NF-Jet3 YSW |
| 1 x | RS-200 Touch Programmer |
| 1 x | Electron 22 mm Fitting barb |
| 1 x | Digital weight, angle and balance meter BASIC |
| 1 x | Electric Landing Gear GS-200 BULL Mo1 2.6 (Elektron Retracts) |
| 2 x | Electric Landing Gear AVANTI XS (Elektron Retracts) |
| 1 x | Head upper part |
| 1 x | LA500 Autogyro |
| 1 x | Softshell Hispano Aviación |
| 1 x | Nose wheel 62 mm |
| 1 x | Manual Controller |
| 1 x | Small aluminium horn red (2pcs) |
| 1 x | PC-21 2880 mm Tren aterrizaje electrico(Electron Retracts |
 |
| 28,086.49EUR |
