| 2 x | Jeti Black cap |
| 1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
| 2 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
| 1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
| 3 x | ABS tube 10.0x8.0x1000 mm |
| 1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
| 1 x | ABS tube 8.0x7.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
| 1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
| 1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
| 2 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
| 1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
| 2 x | ABS tube 3.0x1.0x1000 mm |
| 1 x | ABS tube 6.0x5.0x1000 mm |
| 2 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
| 1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
| 1 x | ABS tube 5.0x4.0x1000 mm |
| 1 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | ABS tube 2.0x1.0x1000 mm |
| 1 x | ABS tube 5.0x4.0x156 mm |
| 2 x | ABS tube 9.0x7.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
| 1 x | ABS tube 16.0x14.0x1000 mm |
| 1 x | ABS tube 4.0x2.0x1000 mm |
| 1 x | ABS tube 7.0x5.0x1000 mm |
| 1 x | ABS tube 8.0x6.0x1000 mm |
| 1 x | Motor DLE 200cc Std |
| 3 x | Big Crow DLE-170M |
| 2 x | Vasa model Catapult |
| 1 x | Silent-blocks DLE 170M |
| 1 x | Bungee HLG Premium |
| 1 x | Small Crow DLE-170M |
| 1 x | Motor DLE 170 M- Paramotors |
| 1 x | 25 mm reinforced hinge |
| 2 x | Sun Cover PC 21 XXL (JMB Jets) |
| 2 x | Suncover 100cc Red |
| 2 x | ABS tube 7.0x6.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
| 1 x | ABS tube 3.0x2.0x330 mm |
| 1 x | Festo 4mm Tubing Holder (10 uds) |
| 1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
| 1 x | Fail Safe air retract |
| 1 x | PRO-HV Dual Action Valve |
| 1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
| 1 x | Body for landing gear Ø 4 mm |
| 1 x | Landing gear strap medium (4 uds) |
| 1 x | Check valve quick hose connector 4-4 mm |
| 1 x | Mini neumatic retract 4 mm landing gear (Het-rc) |
| 1 x | Landing gear clamp for Ø 3 mm (4 uds) |
| 1 x | Landing gear strap small (4 uds) |
| 1 x | Quick hose connector 3-3 mm |
| 1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
| 1 x | Air pressure gauge |
| 1 x | Festo 6mm Tubing Holder (10 uds) |
| 1 x | SyRen 50A 6V-30V Regenerative Motor Driver |
| 1 x | Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm) |
| 1 x | Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
| 1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
| 1 x | 120x60 mm SLH KOVO wheel |
| 1 x | Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
| 1 x | Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs |
| 1 x | MEKP Harderner 100 g |
| 1 x | resin-hardener L-385 H-385 (5000 g) |
| 1 x | Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg |
| 1 x | resin-hardener package L-385 with hardener H-385 (875 g) |
| 1 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
| 1 x | 3 mm Prop Adapter M6 |
| 1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
| 1 x | Silicone red 1,0 qmm wire (100 m) |
| 1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 4 cell |
| 1 x | Silicone red 0,5 qmm wire ( 25 m) |
| 1 x | Yellow silicone 0,5 qmm wire (50 m) |
| 1 x | Starter 12v (Max 90 and 15ccm) |
| 1 x | Z Bender - S Type Tool |
| 1 x | Hot Glue Stick RED |
| 1 x | |
| 1 x | ABS angle 3,0x3,0x1000 mm |
| 1 x | Profile ABS Square 1 x 1000 mm |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
| 1 x | ABS tube 5.0x3.0x1000 mm |
| 1 x | Motor DLE 430 cc - Paramotors |
| 2 x | ABS tube 18.0x16.0x1000 mm |
| 1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
| 1 x | Prop Shaft Adapter 5 mm/M8 "long" |
| 1 x | 2,3 mm Prop Adapter M6 |
| 1 x | 3,2 mm Prop Adapter M6 |
| 1 x | PYRO 750-50L Competition |
| 1 x | KIRA 600-17 |
| 1 x | MAMBO 17 |
| 1 x | KIRA 400-34 |
| 1 x | KIRA 480-38 |
| 1 x | DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV) |
| 1 x | KIRA 400-39 5,2:1 |
| 1 x | PYRO 650-53L EJE LARGO |
| 1 x | PYRO 900-52L |
| 1 x | PYRO 750-50L |
| 1 x | Combo RAY C3542-1000 + ESC 60A |
| 1 x | PYRO 600-12 |
| 1 x | PYRO 700-56L |
| 1 x | KIRA 480-31 5,2:1 |
| 1 x | KIRA 600-20 |
| 1 x | PYRO 700-45 |
| 1 x | Motor OS 3820-1200 electric |
| 1 x | KIRA 400-27 |
| 1 x | PYRO 700-45 Long Axi |
| 1 x | KIRA 480-43 |
| 1 x | KIRA 600-24 6,7:1 |
| 1 x | KIRA 500-30 6,7:1 |
| 1 x | DRIVE 510 (KIRA 480-34 5,2:1 + Koby 55 LV) |
| 1 x | PYRO 650-103 Long Axi |
| 1 x | KONDOR 15-92 |
| 1 x | KIRA 500-36 6,7:1 |
| 1 x | KIRA 480-38 5,2:1 |
| 1 x | KIRA 600-22 6,7:1 |
| 1 x | KIRA 600-16 |
| 1 x | KIRA 500-26 6,7:1 |
| 1 x | KIRA 600-30 6,7:1 |
| 1 x | KIRA 480-26 5,2:1 |
| 1 x | Dust collector for mould cleaning |
| 1 x | TMM 1210-3S heli |
| 1 x | Starter EM Gear Power 80 |
| 2 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
| 1 x | TMM 2512-3S heli |
| 1 x | PSC 6 |
| 1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | ABS tube 3.0x2.0x1000 mm |
| 1 x | T-Hose connector 4-4-4mm |
| 1 x | Y-Hose connector 4-4-4mm |
| 1 x | Wheel cover holder Ø 5 mm (2 uds) |
| 1 x | Wheel 115 mm with electromagnet and brake disk (2 uds) |
| 1 x | Retract/Brake Cable |
| 1 x | ABS Strip 1.5x6.0x1000 mm |
| 1 x | ABS "T" angle 6.0x6.0x1000 mm |
| 1 x | 3 mm Long Prop Adapter M5 |
 |
| 21,311.26EUR |
