| 2 x | 800TVL CMOS camera for FPV |
| 2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 2 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 3 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | Cierre cabina aluminio Ø4, I=10 mm |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 2 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 1 x | One touch canopy lock |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | Straightened rod Ø 2.0 mm x 1000 mm |
| 1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 2 x | Straightened rod Ø 4.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 0.5 mm x 1000 mm |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 2 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | Glases Aspen |
| 1 x | Straightened rod Ø 0.8 mm x 1000 mm |
| 1 x | Straightened rod Ø 8.0 mm x 1000 mm |
| 1 x | Liston HAYA 3 x 10 x 1000 mm |
| 2 x | BALSA triangular 15x15x1000 mm |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | Glases Nimbus "Black" |
| 1 x | Brass rod Ø 1.5 mm x 1000 mm |
| 2 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
| 1 x | Big-Malibu XL Roof box with surfboard rack GREY |
| 2 x | Brass rod Ø 1.0 mm x 1000 mm |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | Straightened rod Ø 2.5 mm x 1000 mm |
| 1 x | Straightened rod Ø 6.0 mm x 1000 mm |
| 1 x | Glases Stratus |
| 1 x | BALSA triangular 6x6x1000 mm |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | Glases Flitemaster |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | Straightened rod Ø 14.0 mm x 1000 mm |
| 1 x | Brass rod Ø 0.8 mm x 1000 mm |
| 1 x | Brass rod Ø 0.5 mm x 1000 mm |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 2 x | Straightened threaded rod M2-1m |
| 1 x | Glases Moritz |
| 1 x | Glases Innovation Plus |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | Straightened rod Ø 5.5 mm x 1000 mm |
| 1 x | Straightened rod Ø 1.0 mm x 1000 mm |
| 1 x | Straightened threaded rod M3 - 1m |
| 1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
| 1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | ABS 500 x 400 x 1,5 mm (white) |
| 2 x | Sun Cover PC 21 XXL (JMB Jets) |
| 2 x | USB Adaptor OPTronics |
| 1 x | Pasacables rectangular 40x15 mm (4 pcs) |
| 1 x | Aro pasacable Ø25 mm (4 pcs) |
| 1 x | Soporte grifo FESTO vertical (1 pcs) |
| 1 x | Support Antena 2.4 Ghz (2 pcs) |
| 1 x | LightBox SR |
| 1 x | Combo lighting module with covering drop shape |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
| 2 x | Steering arm 12 mm Ø 4 mm |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
| 1 x | Allen wheel collar M4x6 |
| 2 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
| 1 x | 80 mm rods set for direction control |
| 1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
| 2 x | Snap short M2 (10 uds) |
| 1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
| 2 x | Canopy Latch |
| 2 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 1 x | Covered closure or fairings |
| 1 x | Split M1,2x10 (10 pcs) |
| 1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
| 2 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
| 3 x | Wheel collar 6 mm Ø (4 uds) |
| 2 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
| 1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
| 1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
| 2 x | Triple rod con. 2mm Pushrod (2 pcs) |
| 1 x | Wing bolts M3 Steel screw blue (2 pcs) |
| 1 x | Round Rod 1,25x1000 mm |
| 1 x | ABS Strip 1.5x8.0x1000 mm |
| 1 x | Strip 2,0x2,0x330 mm |
| 1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
| 2 x | 20 mm carbon horn |
| 2 x | LH long black aluminium horn L31xH30 (2pcs) |
| 1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
| 1 x | Straightened rod Ø 1.5 mm x 1500 mm |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | Balsa panel 8.0x100x1000 mm |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | Balsa panel 4.0x100x1000 mm |
| 1 x | Balsa panel 3.0x100x1000 mm |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | Strip ABS 2.0x8.0x1000 mm |
| 1 x | Strip 1,5x1,5x330 mm |
| 1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
| 1 x | Soporte filtro FESTO (4 pcs) |
| 1 x | Carbon plate 350x150x3.0 mm |
| 1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
| 1 x | USB Mini Camera endoscope |
| 2 x | BATTWIN BATTERY REDUNDANCY SYSTEM |
| 1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
| 1 x | Suncover 100cc Red |
| 1 x | Support Pitot JETI |
| 1 x | Aro pasacable Ø20 mm (4 pcs) |
| 1 x | Support pump Xicoy X45 |
| 1 x | Xoar Electric Beechwood Prop 24x8 |
| 1 x | Set luces Airliner 2.1m Wingspan Scale 1:14 Civil/Sport |
| 1 x | Xoar Electric Beechwood Prop 20x10 |
| 1 x | 4Wx2 Power Navigation Light, 13mm, T-Fuse White |
| 1 x | 8Wx2 Navigation & Strobe, 11mm Red/White |
| 1 x | Propeller POWER-PROP 7x7 |
| 2 x | Brass control horn M2 short for wire (2 pcs) |
| 1 x | 140 mm rods set for direction control |
| 1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
| 2 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Filter Capacitor JR |
| 1 x | Cyanocrylate MD GA460 odourless 20g |
| 1 x | Extra-long adjustable aluminium control horn 2,8x34 |
| 1 x | 6 mm red aluminium threaded horn with patella |
| 1 x | 6 mm M3 variable horn |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | Cyanoacrylate MD GLUE plus 405, for extreme loads 20g |
| 1 x | Small control horn with bearing (2 pcs) |
| 1 x | Small adjustable control horn with bearing |
| 1 x | Horn with ball 55x40 |
| 1 x | Foaming agent for epoxy resins 200 g |
| 1 x | Small aluminium horn blue (2pcs) |
| 1 x | Medium extra-strong control horn with bearing 2,8x24 |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
| 1 x | Horn 5/10 with M2 Bearing |
| 1 x | LH long aluminium horn L31xH30 (2pcs) |
| 1 x | Short extra-strong control horn with bearing 2,8x15 |
| 1 x | Gold antispark 5,5 mm plug |
| 1 x | Motor Advance 50-6 |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 2 x | Cockpit aluminium closing 4.7g |
| 2 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
| 2 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
| 1 x | 100 mm rods + T patellas set for direction control |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 2 x | Pushrod octagone 4/3 with coupler M3 |
| 1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
| 2 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
| 1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
| 1 x | Cockpit plastic closing |
| 1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Tip wing protector 30x10 (2 pcs) |
| 1 x | Pushrod octagone 4/3 |
| 1 x | 45 mm rods + T patellas set for direction control |
| 2 x | Pushrod octagone 3/2 |
| 2 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
| 1 x | Lead with adhesive (2 pcs) |
| 1 x | Split pin 1.6x16 mm (10 uds) |
| 1 x | Wing bolts M6 Steel screw Red (2 pcs) |
| 1 x | NF-1 RC set |
| 1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
| 1 x | 38x4,5 mm wires output (2 pcs) |
| 1 x | Cable grommet Ø 6.4 mm (4 uds) |
| 1 x | Clip mini fixing for wing (2 pcs) |
| 1 x | 6 mm M3 variable inclined horn |
| 1 x | Brass control horn M2 large for wire (2pcs) |
| 1 x | Horn mando small (2 pcs) |
| 1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
| 1 x | Horns indoor |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
| 1 x | Brass control horn M3 short for wire (2 pcs) |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | CA Glue (medium) 20g |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 1 x | Adjustable brass horn threaded M3 |
| 1 x | Long adjustable control horn with bearing |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | Horn with ball 40x30 |
| 1 x | Horn DUBRO 1/2A |
| 1 x | Horn 5/20 with M2 Bearing |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
| 1 x | Horn 13,5x16 mm (2 pcs) |
| 1 x | Hardener Aero EPH 161 (250 g) |
| 1 x | Horn 16,5x20 mm (2 pcs) |
| 1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
| 1 x | Horn mando long (2 pcs) |
| 1 x | Horn 6/35 with M3 Bearing |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 1 x | Horn 20x28,5 mm (2 pcs) |
| 1 x | Short adjustable control horn 3x24 |
| 1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
| 1 x | Horn 5/15 with M2 Bearing |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
| 1 x | Hardener Aero EPH 161 (500 g) |
| 1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Small aluminium horn red (2pcs) |
| 1 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
| 1 x | SlowFlyer control horn (3 pcs) |
| 1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
| 1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
| 1 x | 6 mm aluminium horn with patella |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | CA Glue fast 20g |
| 1 x | |
| 1 x | RH long aluminium horn (2pcs) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | Long extra-strong control horn with bearing 2,8x34 |
| 1 x | Cable with accesories |
| 1 x | Micro control horn (2 pcs) |
| 1 x | Indoor hinge with servo arm integraded |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
| 1 x | Release wax 250ml |
| 1 x | PARTALL® Hi-Temp Wax, 340 g |
| 1 x | Mixing tube for double syringes and cartridges (MR 1:1 and 2:1) |
| 1 x | Brass control horn M2 long for wire (10pcs) |
| 1 x | Brass control horn M4 short for wire (4 pcs) |
| 1 x | Long adjustable control horn 3x34 |
| 1 x | Micro control horn T2 Ø 1 |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
| 1 x | Control horn long w/ball |
| 1 x | Horn for flap control (1 pcs) |
| 1 x | Extra long horn 60x30 |
| 1 x | Digital scale up to 40 kg |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
| 1 x | Rudder forward 90x28 "type Kato" |
| 1 x | Horn F3A de Titanium 16 mm (2 units) |
| 1 x | Long adjustable aluminium control horn 2,8x24 |
 |
| 7,007.88EUR |
