| 1 x | PowerFuel RX V2 Fuel Pump |
| 1 x | PowerBox Smokepump JETs 2x outside |
| 2 x | JM electric Pump |
| 1 x | PowerBox Smokepump |
| 2 x | Electric Fuel Pump 12v |
| 1 x | Smoke pump RCEXL |
| 1 x | Variable Flow Smoke Pump System |
| 1 x | KAVAN Hand crank fuel pump |
| 2 x | Secraft Fuel system v2, red color |
| 1 x | Conector FESTO G1/8 Quick 4mm 90º |
| 1 x | FESTO connector M7 barb fitting XL Tygon |
| 1 x | Straightened rod Ø 2.5 mm x 1000 mm |
| 1 x | Horn 6/20 with M3 Bearing |
| 1 x | Extension PVC 150 cm (Graupner) |
| 1 x | Ring 320 mm length (5 pcs) |
| 1 x | |
| 1 x | Copier 5x20 cm pcs |
| 1 x | Fresa corte diamante Ø 2.35mm (lentil) |
| 1 x | Digital precision scale up to 2000 g |
| 1 x | Aramid fibre shears Proton®, 21 cm / 8" length |
| 1 x | Dremel PERMAGRIT 18 mm round lime |
| 1 x | 25 mm Sandpaper file |
| 1 x | Extinguisher CO2 - 2 Kg |
| 1 x | M3 Maxi ball link (2 uds) |
| 2 x | Carbon fiber flat 1000x3.0x0.13 mm |
| 1 x | Red smoke canister 100 g |
| 1 x | Socket head ball link M3 (2 uds) |
| 1 x | White smoke canister 100 g |
| 1 x | Carbon fiber rod 20 mmx1000 mm |
| 1 x | Adapter lead MPX/EC3 |
| 1 x | "S" set for boats |
| 1 x | Tube Pitot to PIXHAWK |
| 1 x | Smoke set "Glider" |
| 1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 1 x | Micro flex hinge (12 uds) |
| 1 x | Flap hinge 33x9 mm (6 pcs) |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
| 1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | Z type of cable coupler Ø 1 (2 uds) |
| 1 x | Miniature brass strap hinge, 1 m |
| 1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
| 1 x | Large flex hinge (12 uds) |
| 1 x | Ball Link ALU M3 - RH (1 pcs) |
| 1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
| 1 x | Ball link Aluminio M3 (2 pcs) |
| 1 x | Couple M4 for wire (10 pcs) |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
| 1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
| 1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
| 1 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
| 1 x | Kavan Car 25% nitro 1l |
| 1 x | 120x60 mm SLH KOVO wheel |
| 1 x | Bags BULL Mo1 2.6m "Luxe" |
| 1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
| 1 x | Tank BULL MØ1 3L+14L Smoke (CMJets) |
| 1 x | Marker ties (20 pcs) |
| 1 x | USB interface ALTIS |
| 1 x | Aluminium cap bolt washer M4 red (8 pcs) |
| 1 x | Blue aluminium servo arm V1-Hitec 1,5" inch M3 |
| 1 x | Interruptor RX/Batterie |
| 1 x | Female connector JST SH 1.0mm with 10 cm wire |
| 1 x | CC 05 |
| 1 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
| 1 x | Receiver bed (Blue) |
| 1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
| 1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
| 1 x | RX external cable for estandar receivers |
| 1 x | Baseplate servo |
| 1 x | RX cabel |
| 1 x | Y Cable |
| 1 x | Set transmisions BULL Mo1 (dura/aluminium) |
| 1 x | Pipa 3D BULL MØ1 2.600mm |
| 1 x | Tank BULL MØ1 4L (CMJets) |
| 1 x | Tank BULL MØ1 (3.2 L) + 1x (0.9 L) + 1x (0.9L Smoke) PRO |
| 1 x | GPS Expander Module |
| 1 x | Electric Landing Gear GS-200 BULL Mo1 2.6 (Elektron Retracts) |
| 1 x | 800TVL CMOS camera for FPV |
| 1 x | GPS Logger Dymond |
| 1 x | Aluminium wide washer M3 gold (4 pcs) |
| 1 x | Servo Mount S (red) |
| 1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
| 1 x | Servo Mount M (blue) |
| 1 x | Extension 2/3 lipos JST - JST/C |
| 1 x | Optical RPM Sensor |
| 1 x | Aluminium wide washer M4 Black (4 pcs) |
| 1 x | Female connector for 6 pines AWG |
| 1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Extension 5 lipos JST - JST/C |
| 1 x | Rudder 2_Tray 3~3.5 inch |
| 1 x | Male Prolonger TP 4/5S |
| 1 x | Aluminium wide washer M4 Blue (4 pcs) |
| 1 x | Aluminium cap bolt washer M4 green (8 pcs) |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
| 1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
| 1 x | Aluminium cap bolt washer M3 red (8 pcs) |
| 1 x | Male connector JST SH 1.0mm with 10 cm wire |
| 1 x | PSC 5 |
| 1 x | Carbon fiber rod 16 mm x 1000 mm |
| 1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
| 1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
| 1 x | Release film 100 cm x 50 m |
| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
| 1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
| 1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
| 1 x | Carbon fiber rod 2.5 mmx1000 mm |
 |
| 7,675.44EUR |
