| 1 x | Prop Shaft Adapter 6 mm/M8 "long" 35 mm |
| 2 x | 6 mm Prop Adapter M8 |
| 1 x | 3 mm Prop Adapter M6 |
| 3 x | 4 mm Prop Adapter M6 |
| 1 x | 2 mm Prop Adapter M6 |
| 2 x | Prop Shaft Adapter 4 mm/M8 "long" 35 mm |
| 3 x | Prop Shaft Adapter 8 mm/M12 "long" |
| 2 x | 3 mm Prop Adapter M6 |
| 1 x | 3,2 mm Prop Adapter M8 |
| 1 x | 4 mm Prop Adapter M8 |
| 2 x | 5 mm Prop Adapter M6 |
| 2 x | 10 mm Prop Adapter M12 |
| 3 x | 3.17 mm Prop Adapter CN-Spinner |
| 1 x | 5 mm Prop Adapter M8 |
| 1 x | 5 mm Prop Adapter CN-Spinner |
| 2 x | 3,2 mm Prop Adapter M6 |
| 1 x | 2.3 mm Adapter for 30 mm spinners |
| 3 x | 3,2 mm Prop Adapter M6 |
| 1 x | 2,3 mm Prop Adapter M6 |
| 1 x | Prop Shaft Adapter 5 mm "long" |
| 3 x | 6 mm Prop Adapter M8 |
| 1 x | 4 mm Prop Adapter CN-Spinner |
| 1 x | 3.2 mm Prop Adapter M8 |
| 1 x | 5 mm Prop Adapter M8 |
| 1 x | Extractor piñones 2.3/3.2 mm |
| 1 x | Ring 320 mm length (5 pcs) |
| 1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | SE Ring 300 mm (2 pcs) |
| 1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
| 1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | 20x1000 mm Ring Strap Back To Back |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | 20x200 mm battery rings |
| 1 x | SE Ring 240 mm (2 pcs) |
| 1 x | SE Ring 360 mm (2 pcs) |
| 2 x | Cinta Goldfix 1m |
| 1 x | SE Ring 450 mm (2 pcs) |
| 1 x | Tape GFK 25 mm |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Tape GFK 50 mm |
| 1 x | SE Ring 480 mm (2 pcs) |
| 1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
| 1 x | Tape GFK 38 mm |
| 1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
| 1 x | Spikes Band (5 m) |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | SE Ring 250 mm (2 pcs) |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | SE Ring 350 mm (2 pcs) |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 1 x | Screw-lock connector M2 (2 uds) |
| 1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 2 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Cockpit plastic closing |
| 1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 1 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Connectors banna oro 6,0 mm (M/F) |
| 1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
| 1 x | 1/10 Pilot "Jimmy" |
| 1 x | XH female balance (3S) connector (2 pcs) |
| 1 x | XH male balance (4S) connector (2 pcs) |
| 1 x | Pilot "Goose" (Slimline) |
| 1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
| 1 x | ABS Strip 1.5x2.0x1000 mm |
| 1 x | 1/6 Pilot "Cindy" |
| 1 x | ABS Strip 1.5x4.0x1000 mm |
| 1 x | Connectors banna oro 4 mm (M/F) |
| 1 x | Connector CAN 15 |
| 1 x | Piloto jet 130 mm |
| 1 x | Banna gold connector 2,5 mm (M/F) |
| 1 x | 1/6 Pilot "Buddy" |
| 1 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
| 1 x | ABS Strip 1.5x6.0x1000 mm |
| 2 x | Connectors banna oro 0,8 mm (M/F) |
| 1 x | Round Rod 1,25x1000 mm |
| 1 x | MPX Sub-D Adaptor |
| 1 x | Pilot "Dick" Legends Series (Slimline) |
| 2 x | Conector Servo female 4 pines |
| 1 x | Strip 2,5x1,25x330 mm |
| 1 x | XH male balance (5S) connector (2 pcs) |
| 1 x | Piloto Jet "Green" 1/6 Scale |
| 1 x | XH female balance (5S) connector (2 pcs) |
| 1 x | ABS Strip 1.5x8.0x1000 mm |
| 1 x | 1/6 Pilot "Tony" |
| 1 x | Round Rod 1,5x1000 mm |
| 2 x | XH male balance (2S) connector (2 pcs) |
| 1 x | 1/4 Pilot "Mike" |
| 1 x | 1/4 Pilot "Heidi" |
| 1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
| 1 x | Pilot "Duke" Legends Series (Slimline) |
| 1 x | Connectors banna oro 8,0 mm (M/F) |
| 1 x | Civilian pilot "Curt" size 9cm (Slimline) |
| 1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
| 2 x | Connectors banna oro 2 mm (M/F) |
| 1 x | Round Rod 3,0x1000 mm |
| 1 x | Round Rod 6,0x1000 mm |
| 1 x | 1/12 Pilot "Fighter" |
| 1 x | PIX Hawk with accesories |
| 1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
| 1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
| 1 x | ABS tube 3.0x1.0x1000 mm |
| 1 x | ABS tube 6.0x5.0x1000 mm |
| 2 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
| 1 x | ABS tube 3.0x2.0x330 mm |
| 1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
| 2 x | ABS tube 14.0x10.0x1000 mm |
| 1 x | ABS tube 9.0x7.0x1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
| 1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
| 1 x | ABS tube 4.0x2.0x1000 mm |
| 1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
| 1 x | ABS tube 8.0x6.0x1000 mm |
| 1 x | ABS tube 7.0x6.0x1000 mm |
| 1 x | ABS tube 12.0x10.0x1000 mm |
| 1 x | ABS tube 9.0x8.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
| 1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
| 1 x | ABS tube 4.0x3.0x1000 mm |
| 1 x | Starter 12v (Max 90 and 15ccm) |
| 1 x | Green smoke canister 100 g |
| 1 x | Circlick securite |
| 1 x | Cabel "Y" 15 cm |
| 1 x | Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min) |
| 1 x | Fournier RF-4D |
| 1 x | Pendulun "Special" to tank 60g |
| 1 x | Fascination 3600 mm, Spare Elevator (Top Model) |
| 1 x | Fascination 3600 mm (Top Model) |
| 2 x | SATORI 2 PRO V C64 F5J |
| 1 x | BABY glider drawings (Aero-naut) |
| 1 x | Glider STROLCH |
| 2 x | Grafas ARF 3.0 m (Top Model) |
| 1 x | SCHARNHORST accessories |
| 1 x | IMPULSE 2 F3F |
| 1 x | Turbo Prop KS |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | Canopy Sweet / Siesta |
| 1 x | Canopy Astra |
| 2 x | SE Ring HACKER 300 mm (2 pcs) |
| 1 x | Electric spoiler 440 mm (2 pcs) |
| 1 x | JETCENTRAL ECU LIFE BATTERY 3800 MAH |
| 1 x | 250 mm / 16 mm Airbrakes |
| 1 x | Burner Plug K30/ K45 |
| 1 x | KingTech K100TP G4+ Turboprop |
| 1 x | Fail Safe air retract |
| 1 x | Cable grommet Ø 4 mm (4 uds) |
| 1 x | Cockpit aluminium closing 4.7g |
| 1 x | Snap short M2 (10 uds) |
| 1 x | 120x60 mm SLH KOVO wheel |
| 1 x | Snap for floding prop for 2 mm axi |
| 1 x | 100 mm rods + T patellas set for direction control |
| 1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
| 1 x | Split pin 1.6x16 mm (10 uds) |
| 1 x | 80 mm rods set for direction control |
| 1 x | Window mounting channel 5m |
| 1 x | Cable grommet Ø 5 mm (4 uds) |
| 2 x | Blades 330mm |
| 1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
| 1 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
| 1 x | 4 mm Prop Adapter M8 |
| 1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
| 1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
| 1 x | Wing connector 8pin with pin strip, plug & socket |
| 1 x | PPM Encoder Module |
| 1 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
| 1 x | XH female balance (2S) connector (2 pcs) |
| 1 x | Bag connector 2 mm |
| 1 x | 2 mm female connector (2 pcs) with safety connector |
| 1 x | Conector JAPAN G2 Set 5 pares |
| 1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
| 1 x | La Capitania di Venetia 1:50 |
| 1 x | Conector XT-150 6mm (Set: 5 pares) |
| 1 x | Tirpiz Battleship 1:200 |
| 1 x | Strip ABS 2.0x3.0x1000 mm |
| 1 x | Wing connector 8pin with pin strip, plug & socket |
| 1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
| 1 x | Soldering PCBs 8pin, 5 pieces |
| 1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
| 1 x | XH female balance (6S) connector (2 pcs) |
| 1 x | Round Rod 5,0x1000 mm |
| 1 x | Head upper part |
| 1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
| 1 x | Blade holder center GFK 0,5 mm |
| 1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
| 1 x | Cross Connector 4.0 mm x 1000 mm |
| 1 x | T-Connector 4.0 mm x 1000 mm |
| 1 x | Profile ABS Square 1 x 1000 mm |
| 1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
| 1 x | Truck-trailer for gliders 720 x 239 mm |
| 1 x | Truck-trailer for gliders 720 x 285 mm |
| 1 x | Field folding model stand |
| 1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
| 1 x | Steel Screw M1x8 (10 pcs) |
| 1 x | Head spacer |
| 1 x | Grub screw M3x3 shouldered (2 pcs) |
| 1 x | Tail support (2 pcs) |
| 1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
| 1 x | Blade holder center |
| 1 x | Rudder |
| 1 x | Rotorshape Elevator |
| 1 x | Head runner |
| 1 x | Cierva C30 spanish decoration Stickers |
| 1 x | Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
| 1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm) |
| 1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
| 1 x | ABS tube 16.0x14.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø8 mm, Ø6 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm) |
| 1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | Q-12 X-light 2000 mm Electric |
| 1 x | Dual Sequencer Gear and Canopy |
| 1 x | Turbine CHEETAH 160 SE |
| 1 x | FOX ARF 2000 mm Red (Hacker Model) |
| 1 x | Mini VISION "spread tow" CFK |
| 1 x | Swift ARF 2000 mm Red (Hacker Model) |
| 1 x | VAGABOND 1500 mm ARF V2 (Red) |
| 1 x | VAGABOND 1500 mm ARF V2 (Blue) |
| 1 x | Lunak ARF 2000 mm Yellow (Hacker Model) |
| 2 x | TAKEO 3.6m electric |
| 1 x | PBS TJ 40-G2 Turbine |
 |
| 49,951.80EUR |
