| 2 x | Optical RPM Sensor |
| 1 x | GPS Logger Dymond |
| 1 x | SE Ring 350 mm (2 pcs) |
| 1 x | SE Ring 330 mm (4 pcs) |
| 3 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | 20x200 mm battery rings |
| 2 x | Ring 320 mm length (5 pcs) |
| 2 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Tape GFK 25 mm |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | 20x1000 mm Ring Strap Back To Back |
| 2 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | SE Ring 360 mm (2 pcs) |
| 2 x | |
| 1 x | SE Ring 480 mm (2 pcs) |
| 2 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
| 1 x | Spikes Band (5 m) |
| 1 x | Parachute PV6 for F3J |
| 2 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 2 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 3 x | Set cintas unión paracaídas 145 cm |
| 1 x | Liston HAYA 3 x 10 x 1000 mm |
| 1 x | Aramid 50 daN 50 m |
| 2 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | Trike XL motor set (motor+esc+prop) |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | Paramotor Trike XL |
| 1 x | Paramotor BackPack XXS (without accessories) |
| 2 x | Para-RC Mix |
| 2 x | Parachute BACKUP X100 |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 2 x | Pine wood slat 2.0x2.0x1000 mm |
| 2 x | Pine wood slat 6.0x6.0x1000 mm |
| 2 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 2 x | BALSA triangular 10x10x1000 mm |
| 1 x | LUCAS pilot ARTF |
| 1 x | Opale Rucksack |
| 1 x | Windsock Ozone L -1200 mm |
| 1 x | Paramotor BackPack XXS 2 |
| 2 x | Jeti Black cap |
| 1 x | Pine wood slat 5.0x5.0x1000 mm |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | Squared carbon wing joinner 5x5x220 mm |
| 1 x | Carbon fiber rod 2.5 mmx1000 mm |
| 1 x | Carbon fiber flat 1000x3.0x0.5 mm |
| 1 x | Carbon fiber rod 2.0 mmx1000 mm |
| 1 x | Carbon fiber rod 3.0 mm x 1000 mm |
| 1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
| 2 x | Carbon fiber rod 4.0 mmx1000 mm |
| 1 x | Carbon fiber rod 16 mm x 1000 mm |
| 1 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 2 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
| 1 x | Carbon fiber rod 0.8 mmx1000 mm |
| 1 x | Carbon fiber rod 20 mmx1000 mm |
| 1 x | Carbon fiber flat 1000x3.0x0.13 mm |
| 1 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
| 1 x | Ferrita 27x14x7 mm |
| 1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
| 1 x | Digital Air Speed Sensor And Pitot Tube Set |
| 1 x | "S" set for boats |
| 1 x | Remote electric ignition system |
| 1 x | Hot Glue Stick RED |
| 1 x | Locking cable tie 4.6x203 (uds) |
| 1 x | Starter Sullivan-STAR 601 |
| 1 x | Z Bender - S Type Tool |
| 1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
| 1 x | Screwdriver for Torx® TX8 |
| 1 x | Support FUEL DOT V3 |
| 1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
| 2 x | Seoul Power LED 3 watts PCB Sets: 1x white, 1x red, 1x green |
| 1 x | Carbon fiber rod 1.0 mm x 1000 mm |
| 1 x | LED lighting system High Power |
| 1 x | F450/550 Quadcopter, landing gear |
| 1 x | Spare Part Frame Set for EACHINE RACER 250 |
| 2 x | T-Motor U7-V2.0 Kv420 |
| 1 x | 1804 2400KV Brushless Motor Qav 250 mini |
| 1 x | DYNAMOMETER S-1580 |
| 1 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th |
| 3 x | MEKP Harderner 100 g |
| 3 x | resin-hardener L-385 H-385 (5000 g) |
| 1 x | 2 piece mounting frame Battery 3200 / 4000 |
| 1 x | Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC |
| 2 x | 800TVL CMOS camera for FPV |
| 2 x | Hardener P-25, canister 2.5Kg |
| 1 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
| 1 x | Epoxy Resin L 285 + Hardener 386, kit/ 675g |
| 2 x | Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs |
| 2 x | resin-hardener L-385 H-385 (625 g) |
| 1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Epoxy Resin L + Hardener CL (60 min) kit/ 930 g |
| 1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
| 1 x | External LED's (2 pcs) |
| 1 x | 30 cm DEANS female connector |
| 1 x | Adapter lead MPX/EC3 |
| 2 x | ESC ALPHA 60A HV |
| 1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
| 1 x | Crimping tool |
| 1 x | 1 m servo "Premium" wire (white/red/blue) |
| 1 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
| 1 x | 50m servo "Premium" wire (white/red/blue) |
| 1 x | Wing OXY 0,5 pulgadas2 |
| 2 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | Balsa panel 5.0x100x1000 mm |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | Lite Plywood panel 600x300x3.0 mm |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | BALSA triangular 6x6x1000 mm |
| 1 x | Wing OXY 5,0 m2 |
| 1 x | Ballast 700gr OPALE |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | Soporte grifo FESTO (2 pcs) |
| 1 x | Support Filtro FESTO |
| 1 x | Aro pasacable Ø20 mm (4 pcs) |
| 1 x | Pasacables rectangular 40x15 mm (4 pcs) |
| 1 x | Support Flush MPX Conector (6 pcs) |
| 1 x | Combo lighting module with covering drop shape |
| 1 x | |
| 1 x | TRAINER RC Pilot V2 90" w/r ARF |
| 1 x | CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9) |
| 1 x | PARAGON Trainer 46-55 1580 mm |
| 1 x | Servo Mount M (blue) |
| 1 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
| 1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
| 1 x | Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g |
| 1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
| 1 x | Motor GAUI F-50R (rear intake) |
| 1 x | DUPLEX 2.4EX MUI 150 Sensor |
| 1 x | Winter-Glove DS tx |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 2 x | Hardener Aero EPH 161 (250 g) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 2 x | Quadcopter Q50 Kit Carbon Fiber |
| 1 x | AXI 2204 Multicopter |
| 1 x | Combustible Glow "KAVAN" air/heli 10% nitro |
| 1 x | Aluminium red ball links M3 V1 (10 pcs) |
| 1 x | Marker ties (20 pcs) |
| 1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
| 1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
| 1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
| 1 x | Brass ball links BS M3 V1 (10 pcs) |
| 1 x | Blue aluminium servo arm V1-Hitec 1,5" inch M3 |
| 1 x | Ball link duraluminium M3 V1 (10 pcs) |
| 1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
| 1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg |
| 2 x | resin-hardener L-385 H-385 (1250 g) |
| 1 x | Mould Resin P 10 kg |
| 1 x | USB Mini Camera endoscope |
| 1 x | Mould Resin P + Hardener EPH 161-P, kit/ 585 g |
| 1 x | Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg |
| 1 x | resin-hardener package L-385 with hardener H-385 (3.5 Kg) |
| 1 x | Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg |
| 2 x | Hardener Aero EPH 161 (500 g) |
| 1 x | SAVOX SH 0254 servo |
| 1 x | resin-hardener package L-385 with hardener H-385 (875 g) |
| 1 x | resin-hardener package L-385 with hardener H-385 |
| 1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
| 1 x | Servo Arm aluminium ALU-STAR |
| 1 x | DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch |
 |
| 14,545.71EUR |
