| 2 x | Softshell Hispano Aviación |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | Bec MR UBEC 5A (5v/6v/7v) |
| 1 x | CC 05 |
| 1 x | TP/TopFuel - XH 2/3S Adapter |
| 2 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | MPX-Dean "T" Adapter |
| 1 x | USB HLS prog. interface |
| 2 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 2 x | 3 LiPo XH>EH adapter |
| 1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
| 2 x | CC 03 |
| 2 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Adapter lead MPX/EC3 |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 1 x | RF9 Flight Simulator with Spektrum Controller |
| 3 x | Interface Jack Adapter IKARUS |
| 3 x | Beech dowels 2.0 x 1000 mm |
| 2 x | Beech dowels 4.0 x 1000 mm |
| 2 x | Pine wood slat 6.0x6.0x1000 mm |
| 2 x | BALSA trip 6.0x6.0x1000 mm |
| 2 x | BALSA trip 10x10x1000 mm |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 3 x | BALSA leading edge 8x10x1000 mm |
| 2 x | Walnut wood slat 3.0x3.0x1000 mm |
| 2 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | Pine wood slat 10x10x1000 mm |
| 2 x | BALSA triangular 15x15x1000 mm |
| 2 x | BALSA trip 2.0x10.0x1000 mm |
| 2 x | BALSA triangular 10x10x1000 mm |
| 2 x | BALSA triangular 8x8x1000 mm |
| 2 x | Linden wood slat 2.0x2.0x1000 mm |
| 2 x | Beech dowels 3.0 x 1000 mm |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 3 x | BALSA triangular 6x6x1000 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 2 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 2 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | Liston HAYA 3 x 10 x 1000 mm |
| 2 x | Pine wood slat 3.0x5.0x1000 mm |
| 2 x | Beech dowels 10 mm x 1000 mm |
| 1 x | Propeller balancer |
| 1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
| 1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
| 1 x | L-Connector 4.0 mm x 1000 mm |
| 1 x | Tape GFK 25 mm |
| 1 x | Carbon fiber rod 8.0 mmx1000 mm |
| 1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
| 1 x | Blades 330mm |
| 3 x | Shirt Hispano Aviación |
| 1 x | Support Pitot JETI |
| 1 x | Aro pasacable Ø25 mm (4 pcs) |
| 2 x | Bungee HLG Premium |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | USB interface ALTIS |
| 1 x | Extension 5 lipos JST - JST/C |
| 1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
| 2 x | 30 cm BEC cable (male) |
| 1 x | Interface Realflight Simulator |
| 1 x | EasyFLY Addon |
| 1 x | Light System |
| 2 x | BALSA trip 5.0x5.0x1000 mm |
| 2 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | Balsa panel 5.0x100x1000 mm |
| 1 x | A/C economy plywood 600x300x6+.0 mm |
| 2 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
| 1 x | Balsa panel 4.0x100x1000 mm |
| 2 x | Balsa panel 6.0x100x1000 mm |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 2 x | A/C quality beech plywood 1520x750x4.0 mm |
| 2 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | A/C quality beech plywood 1520x750x3.0 mm |
| 1 x | Lite Plywood panel 600x300x3.0 mm |
| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | PH6 adapter for 6mm M10 AXI for AXI41xx |
| 1 x | QS Bulkhead Valve 4/4 mm |
| 1 x | 2,3 mm Prop Adapter M6 |
| 1 x | EVP Unit for AXI2208/xx and 2212/xx |
| 1 x | Rotorshape Autogyro |
| 1 x | Blade holder lower |
| 1 x | Rudder |
| 1 x | Propeller 3x2 |
| 1 x | Motor DLE 170 M- Paramotors |
| 1 x | Motor Advance 30-10 F3A |
| 1 x | PHASOR RACE 2035/4100 1D |
| 1 x | Propeller 9x7 SlowFlyer |
| 1 x | Propeller 10x4,7 SlowFlyer |
| 1 x | Propeller 8x4 Electric |
| 1 x | Propeller 11x4,7 SlowFlyer |
| 1 x | Silent-blocks DLE 170M |
| 1 x | Motor DLE 430 cc - Paramotors |
| 3 x | Small Crow DLE-170M |
| 2 x | Motor DLE 200cc Premium Muffler |
| 2 x | Motor DLE 200cc Std |
| 2 x | Propeller FALCON 32,5x11 PUSHER Carbono |
| 1 x | PPS-4D Propeller |
| 1 x | Indoor Brushed motor kit |
| 1 x | Servo NARO Max Std |
| 1 x | JETImodel SINGLE BEC |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | 4 LiPo XH>EH adapter |
| 1 x | Carbon plate 350x150x3.0 mm |
| 1 x | Birch plywood plate 600x300x1.5 mm |
| 1 x | PVC transparent battery termo-retract 51 mm (1 m) |
| 1 x | Falcon Carbon Spinner 82mm for electric motor |
| 1 x | 290 mm M4 7/8x212 mm shaft ship |
| 1 x | Spinner Alumin. fixed propeller 45 mm / 4,0 mm |
| 1 x | ABS rectangular profile 12x6.0x1000 mm |
| 1 x | Propeller APC 11x5 Glow/Gas |
| 1 x | Prop Shaft Adapter 4 mm/M8 "long" 35 mm |
| 1 x | Propeller APC 11x6 Glow/Gas |
| 1 x | 6 mm Prop Adapter M8 |
| 1 x | TrainerCord (master-learner) |
| 1 x | Balsa panel 1.5x100x1000 mm |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | Balsa panel 3.0x100x1000 mm |
| 1 x | Balsa panel 2.0x100x1000 mm |
| 1 x | Lite Plywood panel 600x300x2.0 mm |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | Birch plywood plate 600x300x2.5 mm |
| 1 x | Pine wood slat 5.0x5.0x1000 mm |
| 1 x | Tarjeta programadora RAY G2 |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | ABS tube 16.0x14.0x1000 mm |
| 1 x | 70 mm INO spinner (carbon imitation) |
| 1 x | ABS Strip 1.5x6.0x1000 mm |
| 1 x | 57 mm INO spinner (carbon imitation) |
| 1 x | ABS Strip 1.0x2.0x1000 mm |
| 1 x | ABS angle 2,0x2,0x1000 mm |
| 1 x | ABS "T" angle 2.0x2.0x1000 mm |
| 1 x | ABS Strip 1.0x5.0x1000 mm |
| 1 x | 4 mm Prop Adapter M8 |
| 1 x | 4 mm Prop Adapter M6 |
| 1 x | 3 mm Prop Adapter M6 |
| 2 x | 2 mm Prop Adapter M5 |
| 1 x | Propeller APC 14x6 Glow/Gas |
| 1 x | Propeller APC 11x7 Glow/Gas |
| 1 x | 2.3 mm Adapter for 30 mm spinners |
| 1 x | Propeller APC 16x6 Glow/Gas |
| 1 x | ESC RAY G2 R-60SB SBEC |
| 1 x | EXTRA 330L 35% hardware pack (Precision Aerobatics) |
| 1 x | Servo Fork |
| 1 x | Transmitter Cadet 4Ch (V3) 2,4 GHz Mod.2 |
| 1 x | ARS 300 91" ARF 2311mm ORANGE |
| 1 x | EXTRA 330 LX 2.34m ARF (LX-09) Pilot |
| 1 x | Sukhoi 29S 2,6 m Yellow/Black (SebART) |
| 1 x | EDGE 540 1.73m SEAGULL Model |
| 1 x | SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm |
| 1 x | Vest clothes Hispano Aviación |
| 1 x | BEC 3A FOXY |
| 1 x | SIMtransmitter 6 Mode 2 |
| 1 x | Sukhoi 29S 2,6 m White/Blue (SebART) |
| 1 x | EDGE 540-A 74" (1880 mm) |
| 1 x | Sukhoi 29S 2,6 m,CF landing gear(SebART) |
| 1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
| 1 x | ULTRA STICK 30 cc ARF |
 |
| 30,110.48EUR |
