| 1 x | Shirt Hispano Aviación |
| 1 x | Motor DLE 170 M- Paramotors |
| 1 x | Cap Hispano Aviación |
| 1 x | Interface Realflight Simulator |
| 1 x | Oracover Black 10 m |
| 1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
| 1 x | Oracover CARBON Metalic 1 m |
| 3 x | PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 1 x | ABS tube 6.0x5.0x1000 mm |
| 1 x | Piloto JET 1:3,5 |
| 2 x | Switch Button DS Tx DUPLEX |
| 2 x | AddCAP 10AS capacitors |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
| 3 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
| 1 x | DUPLEX 2,4EX Brackets for Transmitter DC/DS |
| 1 x | ABS tube 16.0x14.0x1000 mm |
| 1 x | DUPLEX 2,4GHz MRPM EX |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | Pilot "Duke" Legends Series (Slimline) |
| 1 x | 1/10 Pilot "Jimmy" |
| 1 x | Pine wood slat 5.0x5.0x1000 mm |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 |
| 2 x | Transmitter Stick Ends JETI DS-16/14 |
| 1 x | Battery RX JETI LiIon RB 3100 7.2v |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
| 1 x | Neck strap JETI DS |
| 1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
| 1 x | 1/4 Pilot "Mike" |
| 1 x | Ball Link Plier |
| 1 x | Transmitter Balancer SPK DX-8 |
| 1 x | Emisora JETI Duplex DS-12 EX Special Edition "Carbon Purple" |
| 1 x | Switch Cap L (silver) |
| 1 x | Cross Connector 4.0 mm x 1000 mm |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | Emisora JETI Duplex DS-16 II Carbon Line RED |
| 1 x | Crimping tool |
| 1 x | Mono-Switch Memory FUTABA |
| 1 x | Switch moment button, 2 functions, long FUTABA |
| 1 x | 1,5x50 mm allen screwdriver |
| 1 x | ABS angle 4,0x4,0x1000 mm |
| 1 x | Transmitter Balancer Futaba FF9-DX7-JR-Hitec |
| 1 x | Angle of incidence meter |
| 1 x | Transmitter JETI Duplex DS-24 EX Carbon Line Dark BLUE Multimod |
| 1 x | Aluminium cap bolt washer M3 red (8 pcs) |
| 1 x | ABS "T" angle 4.0x4.0x1000 mm |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | Adap/Exten for Futaba 12-14C |
| 1 x | Transmitter JETI Duplex DC-24 EX Carbon Line Light BLUE Multimo |
| 1 x | Transmitter JETI Duplex DS-24 EX Carbon Line Multimode |
| 1 x | Emisora JETI Duplex DS-16 II SILVER Multimode |
| 1 x | Ball link M2,5 (10 pcs) |
| 1 x | Maleta transporte FUTABA 10PX |
| 1 x | M3 Maxi ball link (2 uds) |
| 1 x | Cabling for Fox MDM1 wings |
| 1 x | Aluminium wide washer M4 Black (4 pcs) |
| 1 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
| 1 x | Futaba Multi-Switch 16 DECODER |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
| 1 x | Brass control horn M4 long for wire (4 pcs) |
| 1 x | Brass control horn M2 large for wire (2pcs) |
| 1 x | Horn F3A de Titanium 16 mm (2 units) |
| 1 x | Conector BEC female (10 pcs) |
| 1 x | Banna gold connector 2,5 mm (M/F) |
| 1 x | 6 mm red aluminium threaded horn with patella |
| 1 x | Horn micro type4 Ø 0,5 (2 pcs) |
| 1 x | Extra long horn 60x30 |
| 1 x | Horn with ball 40x30 |
| 1 x | Control horn long w/ball |
| 1 x | Horn mando small (2 pcs) |
| 1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
| 1 x | Extra-long adjustable aluminium control horn 2,8x34 |
| 1 x | Connectors banna oro 3 mm (M/F) |
| 1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
| 1 x | 6 mm blue aluminium threaded horn with patella |
| 1 x | Conector JAPAN G2 Set 5 pares |
| 1 x | Conector XT-30 (macho) |
| 1 x | 20 mm carbon horn |
| 1 x | Cable control set |
| 1 x | Piñon motor rotor LA-500 |
| 1 x | Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz |
| 1 x | LA500 cyclic central part |
| 1 x | Motor rotor LA-500 |
| 1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
| 1 x | CNC FPV Display screen&Transmitter Holder Vertical |
| 1 x | Fiberglass plate 350x150x1.0 mm |
| 1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
| 1 x | Foam plastic plates (310x210x8 mm) |
| 1 x | Aluminium sheet 500x250x0,5mm |
| 1 x | Fiberglass plate 350x150x1.5 mm |
| 1 x | PHASOR RACE 2035/4100 1D |
| 1 x | Switch Spring-Loaded 2-Position DC Tx DUPLEX 2,4EX |
| 2 x | Switch for DS: Long 2 Position |
| 1 x | Glass fibre sleeve Ø 20 mm X 10m |
| 1 x | DUPLEX R7 receiver nano 2,4 GHz |
| 1 x | Foam plastic plates (310x210x2 mm) |
| 1 x | Receiver DUPLEX R5L EX 2.4 GHz |
| 1 x | Stick with Button DC/DS-16/14/24 Tx DUPLEX 2,4EX |
| 1 x | switch short 3-position DS Tx DUPLEX 2,4EX |
| 1 x | Switch for DS: Long 3 Position |
| 1 x | Servo JETI DSHV 3D13T (13 Kg) |
| 1 x | SBEC Jeti |
| 1 x | Jeti Spin 220 Pro OPTO |
| 1 x | Pitot tube JETI MSpeed DUPLEX |
| 2 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
| 1 x | ABS angle 10,0x10,0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
| 1 x | Profile ABS half cane 2.0x1000 mm |
| 1 x | ABS "T" angle 2.0x2.0x1000 mm |
| 1 x | Profile ABS Square 4 x 1000 mm |
| 1 x | LED blink wire flashing (red - 2pcs) |
| 1 x | Rubber profile 10-2 mm 2M |
| 1 x | ABS rectangular profile 12x6.0x1000 mm |
| 1 x | Profile ABS half cane 4x1000 mm |
| 1 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
| 1 x | Hand Pads for Tray JETI |
| 2 x | SWTU2 switch |
| 2 x | Switch Nutspanner for JETI Duplex Transmitter DC / DS |
| 2 x | Jeti Black cap |
| 1 x | Master MEZON 120 |
| 2 x | Switch for DS: Short 2 Position |
| 1 x | Teacher / Student Cable |
| 1 x | Jeti Spin 200 OPTO |
| 1 x | Jeti Spin 300 OPTO |
| 1 x | switch 1-Spring-DOWN 3-position DS Tx DUPLEX 2,4EX |
| 1 x | Sensor DUPLEX 2.4EX MUI 200 MULi 6S for measuring voltage on LiX |
| 1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
| 1 x | Carbon roving DowAksa / 24k / 1600 tex |
| 2 x | Holder for DC Transmitter/Tray DUPLEX 2,4EX |
| 1 x | DUPLEX 2.4EX Satellite receiver Rsat 2 |
| 1 x | Receiver DUPLEX R3L EX 2.4 GHz |
| 1 x | DUPLEX R12 EPC receiver 2,4GHz |
| 1 x | DUPLEX R7 REX receiver 2,4GHz |
| 1 x | RC Power Switch 5A |
| 1 x | Film release agent PVA 25 ml |
| 1 x | DUPLEX R7 REX receiver 2,4GHz A40 |
| 1 x | JETImodel SINGLE BEC |
| 1 x | DUPLEX R12 receiver REX Assist |
| 1 x | Jeti Advance Pro Program Card |
| 1 x | MT 125 temperature sensor |
| 1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
| 1 x | Jeti SPIN 55 Pro |
| 1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
| 1 x | Chopped glass fibre strands 3 mm |
| 1 x | ABS 500 x 400 x 2,0 mm (white) |
| 1 x | Fiberglass plate 350x150x2.5 mm |
| 1 x | Chopped glass fibre strands 3 mm |
| 1 x | DUPLEX USB Adapter |
| 1 x | Screws of the Back Cover for DS14/16/24-Tx (8pcs.) |
| 1 x | Styrene plate 320x120x1.0 mm |
| 1 x | PHASOR RACE 2035/2100 2D |
| 1 x | PVC grid straight 290x185x0.32 mm |
| 1 x | JETI SPIN 80 Pro |
| 1 x | Jeti Spin 77 OPTO |
| 1 x | Glass fibre sleeve Ø 20 mm |
| 1 x | DUPLEX R6G indoor receiver 2,4GHz |
| 1 x | Styrene plate 320x120x0.5 mm |
| 1 x | Jeti Spin 22 |
| 1 x | JETImodel DPS 40 |
| 1 x | Foam plastic plates (310x210x5 mm) |
| 1 x | Receptor DUPLEX REX R9 Slim Assit |
| 2 x | PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX |
| 1 x | MAX BEC |
| 1 x | switch 1-Spring-DOWN 3-position DC Tx DUPLEX 2,4EX |
| 1 x | MRPM-AC revolution sensor |
| 2 x | Switch for DC: Long 3 Position |
| 1 x | DUPLEX R6 receiver REX Assist |
| 1 x | Jeti SPIN 66 Pro |
| 1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
| 1 x | ABS 500 x 400 x 1 mm (white) |
| 1 x | Foam plastic plates (310x210x3 mm) |
| 1 x | Tray JETI for DS-14/16/24 Black |
| 1 x | Jeti Spin 125 OPTO |
| 1 x | Jeti Advance Plus Program Card |
| 1 x | DUPLEX 2.4EX MT 125 temperature sensor |
| 1 x | Jeti Spin 99 OPTO |
| 1 x | DUPLEX R10 receiver REX Assist |
| 1 x | Electronic switch JETI SP06 Opto |
| 1 x | JETI Counter for DC-24 Carbon Design 3 |
| 1 x | switch 1-Spring-UP 3-position DC Tx DUPLEX 2,4EX |
| 1 x | ESC MEZON 120 Lite |
| 1 x | DUPLEX 2,4EX Stick with 3-Position Switch for Transmitter DC/DS |
| 1 x | switch long 3-position DC Tx DUPLEX 2,4EX |
| 1 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
| 1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
| 1 x | JetiBOX |
| 1 x | Satellite receiver DUPLEX Rsat 900 NG MHz |
| 1 x | switch 1-Spring-UP 3-position DS Tx DUPLEX 2,4EX |
| 1 x | Glass fabric 25 g (2 m²) |
| 1 x | DUPLEX R14 receiver 2,4GHz |
| 1 x | PVC grid diagonal 290x185x0.32 mm |
| 1 x | SBEC 40 |
| 1 x | Jeti SPIN 33 Pro |
| 1 x | Electronic switch JETI SP6 0-15v/6A |
 |
| 22,778.65EUR |
