| 1 x | Screw-lock connector M2 (2 uds) |
| 2 x | One touch canopy lock |
| 2 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 2 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 4 x | USB Mini Camera endoscope |
| 2 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 2 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 2 x | Cockpit plastic closing |
| 1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 3 x | 800TVL CMOS camera for FPV |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 2 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 3 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
| 2 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 2 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 2 x | Canopy Latch |
| 2 x | Steering arm 16 mm Ø 4 mm |
| 3 x | Canopy Lock V1 M3 Red (2 pcs) |
| 1 x | Covered closure or fairings |
| 1 x | Circlik for shaft 1.2 mm (10 pcs) |
| 1 x | Circlik for shaft 1.5 mm (10 pcs) |
| 1 x | Aluminium cap bolt washer M4 green (8 pcs) |
| 1 x | Aluminium cap bolt washer M3 black (8 pcs) |
| 1 x | Aluminium cap bolt washer M3 red (8 pcs) |
| 1 x | Lock washer 2.2 mm (20 pcs) |
| 1 x | Flat washer 3.2 mm (20 pcs) |
| 1 x | Spring lock washer 2.6 mm (20 pcs) |
| 1 x | Flat washer 2.7 mm (20 uds)pcs) |
| 1 x | Flat washer 1.7 mm (20 pcs) |
| 1 x | Aluminium wide washer M3 blue (4 pcs) |
| 1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
| 1 x | Profile ABS Square 2 x 1000 mm |
| 1 x | U Profile ABS 5,0x10,0x1000 mm |
| 1 x | ABS angle 4,0x4,0x1000 mm |
| 1 x | ABS "T" angle 6.0x6.0x1000 mm |
| 1 x | L-Connector 1.5 mm x 1000 mm |
| 1 x | ABS angle 3,0x3,0x1000 mm |
| 1 x | Profile ABS half cane 2.5x1000 mm |
| 1 x | Profile ABS Square 1 x 1000 mm |
| 1 x | L-Connector 1.0 mm x 1000 mm |
| 1 x | Profile ABS Square 4 x 1000 mm |
| 2 x | ABS angle 2,0x2,0x1000 mm |
| 1 x | Profile ABS Square 3 x 1000 mm |
| 1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
| 1 x | ABS angle 10,0x10,0x1000 mm |
| 1 x | ABS "T" angle 2.0x2.0x1000 mm |
| 1 x | ABS angle 6,0x6,0x1000 mm |
| 1 x | ABS "T" angle 8.0x8.0x1000 mm |
| 1 x | Cross Connector 4.0 mm x 1000 mm |
| 1 x | L-Connector 4.0 mm x 1000 mm |
| 1 x | U Profile ABS 1,0x2,0x1000 mm |
| 2 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 1 x | Pin type hinge Al 6x98 mm (2 pcs) |
| 1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
| 1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 2 x | Nylon hinge 15x0,3 (10 pcs) |
| 2 x | Gates hinge |
| 1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
| 1 x | Miniature brass strap hinge, 1 m |
| 1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Fast'n EZ-CA-Hinge (12 uds) |
| 3 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 1 x | Long pinned hinge (12 uds) |
| 1 x | Motor A2212/13T |
| 1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Large flex hinge (12 uds) |
| 1 x | 18 mm reinforced hinge |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
| 1 x | Oratex Natural White 20m |
| 1 x | Quadcopter Q50 Kit Carbon Fiber |
| 1 x | 38x4,5 mm wires output (2 pcs) |
| 1 x | Split pin 1x8 mm (10 uds) |
| 1 x | SD HC 8 GB |
| 1 x | Cable grommet Ø 4 mm (4 uds) |
| 1 x | 41x5,5 mm wires output (2 pcs) |
| 1 x | Cable tie mounts 4.3 (4 uds) |
| 1 x | DJI Mavic Air Fly More Combo |
| 1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
| 1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
| 1 x | Wheel collar 3.5 mm Ø (4 uds) |
| 2 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
| 2 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
| 1 x | Pushrod greyline 3/2 with coupler M2 |
| 2 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 2 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 2 x | Locking cable tie 2.5x100 (uds) |
| 1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 1 x | SUS wire 3m (nylon coated) |
| 1 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | Socket Head Screw M2x5 |
| 1 x | Screw M3x20 (10 pcs) |
| 1 x | Walbro carburetor for MVVS 26/30/35/40 cc |
| 1 x | Variable Flow Smoke Pump System |
| 1 x | Socket Head Screw M2x12 |
| 1 x | Motor ACTRO 50-2-760 |
| 1 x | Tapping Screw M2.2x65 (10 pcs) |
| 1 x | Socket Screw M2x3 mm (4 pcs) |
| 1 x | Regulador NAVY 540R |
| 1 x | Support Flush MPX Conector (6 pcs) |
| 1 x | Electric Fuel Pump 12V |
| 1 x | Distanzstück motor OS 120 AX |
| 1 x | Electronic fog horn |
| 1 x | SC NAVY V15R |
| 1 x | Spring clamp for tube Ø50 mm |
| 1 x | Jeti Black cap |
| 1 x | Aqua RACE 70 (without motor) |
| 1 x | Pan Head Screw M1,6x6 (10 pcs) |
| 1 x | Tapping Screw M2.9x9.5 (10 pcs) |
| 1 x | BOX-Setup Actro-marine |
| 1 x | Motor RACE 720 Navy 12v |
| 1 x | Motor RACE 20 Navy 12v |
| 1 x | Screw M4x30 (10 pcs) |
| 1 x | Screw M3x8(10 pcs) |
| 1 x | Secraft Fuel system v2, red color |
| 1 x | Profile ABS triangular 4.0x1000 mm 90º |
| 1 x | U Profile ABS 2,0x4,0x1000 mm |
| 1 x | ABS rectangular profile 12x6.0x1000 mm |
| 1 x | Profile ABS half cane 4x2.5x1000 mm |
| 1 x | ABS angle 5,0x5,0x1000 mm |
| 1 x | Profile ABS half cane 4x1000 mm |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 1 x | Fuel bottle 500 ccm |
| 1 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 1 x | Gates hinge 30x16 mm (2 pcs) |
| 2 x | Snap long M2 (10 uds) |
| 2 x | 140 mm rods set for direction control |
| 1 x | Window mounting channel 5m |
| 1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
| 1 x | Cable grommet Ø 6.4 mm (4 uds) |
| 1 x | Tank GFK Opus/JEt 300 ml |
| 1 x | 12 mm portholes (10 pcs) |
| 1 x | 3 mm Leader (L 100 mm) |
| 1 x | 10x7 tree blades propeller |
| 1 x | 31,0 mm propeller (rigth propeller) |
| 1 x | Electric Landing Gear "Black Edition" BULL Mo1 2.6 (Elektron Re |
| 1 x | Harness for transmitter JETI DUPLEX |
| 1 x | Cockpit aluminium closing 4.7g |
| 2 x | Wing bolts M3 Steel screw blue (2 pcs) |
| 1 x | 250 mm / 16 mm Airbrakes |
| 1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
| 1 x | Cockpit aluminium closing 5.4g |
| 1 x | Split pin 1.6x16 mm (10 uds) |
| 1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Cable grommet Ø 5 mm (4 uds) |
| 1 x | Control for forward wheel (MINI) |
| 1 x | Crimping tool |
| 1 x | 140 mm rods + T patellas set for direction control |
| 1 x | Split M1,2x10 (10 pcs) |
| 1 x | Allen wheel collar M4x4 |
| 1 x | Landing gear frontal support 25x32x16 |
| 1 x | Allen wheel collar M4x6 |
| 1 x | Snap for floding prop for 2 mm axi |
| 1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
| 1 x | Snap short M2 (10 uds) |
| 1 x | Wing bolts M6 Steel screw Red (2 pcs) |
| 1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
| 1 x | 28x5 mm wires output (2 pcs) |
| 1 x | Snap pin for micro clevis (10 uds) |
| 1 x | 100 mm rods set for direction control |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | Cable grommet Ø 3.2 mm (4 uds) |
| 1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
| 1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
| 1 x | OPUS-V / Jet-CC-BF |
| 1 x | 50N turbine start protection tube |
| 1 x | VIPER JET 2.2m + Electric landig Gear Deco: 01 Red-Blac-kWhit |
| 1 x | Ring support P-20 OPUS V-Jet 60mm |
| 1 x | 29,0 mm propeller (rigth propeller) |
| 1 x | 28 mm turnbuckle |
| 1 x | 3 mm Prop Adapter M6 |
| 1 x | 1000 ml sealer (DOPE) |
| 1 x | 3,2 mm Prop Adapter M6 |
| 1 x | 3.17 mm Prop Adapter CN-Spinner |
| 1 x | 300x4 mm M4 shaft ship |
| 1 x | 25,0 mm 3-BL M4 hydro-propeller (left hydropropeller) |
| 1 x | 14 mm portholes (10 pcs) |
| 1 x | 3 mm Prop Adapter M6 |
| 1 x | 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller) |
| 1 x | 12x8 tree blades propeller |
| 1 x | 11x7 tree blades propeller |
| 1 x | 29,0 mm propeller (left propeller) |
| 1 x | Bags wings/rudder ASPIRE |
| 1 x | ESC RAY G2 R-60SB SBEC |
| 1 x | F-16 Scale 1:6, Electric retract landing gear |
| 1 x | ASPIRE Red ARF 2.000 mm, Front Fuselage |
| 1 x | HAWKER HUNTER 1:5,8 Desert (1.770mm) |
| 1 x | Set Legs + Wheels with brake ASPIRE |
| 1 x | HAWKER HUNTER 1:5,8 (1.770mm) |
| 1 x | Pipa 3D F-16 Scale 1/6 |
| 1 x | Electric Landing Gear "Black Edition" BULL Mo1 2.6 GS200 (Electr |
| 1 x | Transmitter Cadet 4Ch (V3) 2,4 GHz Mod.2 |
| 1 x | ASPIRE Red ARF 2.000 mm, Set Alas |
| 1 x | BEC 3A FOXY |
| 1 x | Kontronik ProgUnit |
 |
| 18,062.92EUR |
