| 1 x | Nitroverdu 500 ml |
| 2 x | Vasa model Catapult |
| 1 x | Bungee HLG Premium |
| 1 x | Straightened rod Ø 4.5 mm x 1000 mm |
| 1 x | ABS tube 16.0x14.0x1000 mm |
| 1 x | Straightened rod Ø 0.8 mm x 1000 mm |
| 1 x | Straightened rod Ø 5.0 mm x 1000 mm |
| 1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
| 1 x | Motor A2212/13T |
| 1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
| 2 x | Brass rod Ø 1.5 mm x 1000 mm |
| 1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
| 1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
| 2 x | Straightened rod Ø 1.5 mm x 1500 mm |
| 1 x | Straightened rod Ø 8.0 mm x 1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
| 1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | Straightened rod Ø 2.0 mm x 1000 mm |
| 3 x | Brass rod Ø 0.5 mm x 1000 mm |
| 1 x | ABS tube 5.0x3.0x1000 mm |
| 1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
| 1 x | Straightened rod Ø 6.0 mm x 1000 mm |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 3 x | BALSA triangular 8x8x1000 mm |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 2 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | Pine wood slat 3.0x5.0x1000 mm |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 2 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | Gates hinge black 30x16 mm (2 pcs) |
| 1 x | Strip ABS 2.0x3.0x1000 mm |
| 1 x | Ball Link Plier |
| 1 x | ABS "T" angle 4.0x4.0x1000 mm |
| 1 x | Flat Connector 4.0 mm x 1000 mm |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | Extension silicon 75 cm (Graupner) |
| 1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
| 1 x | Futaba S-Bus Rx/Gyro Link Lead |
| 1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
| 1 x | 8Wx2 Navigation & Strobe, 11mm, T-Fuse Red/White |
| 1 x | Jet Afterburner Simulator NF-Jet3 RY |
| 1 x | NF-3X-350 set |
| 1 x | 3x8W Triple-Spotlight, 12mm, T-Fuse White |
| 1 x | LOGO 600 SX (kit) |
| 1 x | VTX 477 Carbon Rotorblade |
| 1 x | NF-3 RC set |
| 1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
| 2 x | Brass rod Ø 1.0 mm x 1000 mm |
| 2 x | ABS tube 3.0x2.0x1000 mm |
| 1 x | Straightened threaded rod M2-1m |
| 1 x | ABS tube 14.0x10.0x1000 mm |
| 1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
| 3 x | ABS tube 3.0x1.0x1000 mm |
| 2 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
| 1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
| 1 x | ABS tube 9.0x8.0x1000 mm |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
| 2 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
| 1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm) |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
| 1 x | Sanyo RX Battery Eneloop 6,0 V FUT |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm) |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | Sanyo RX Battery Eneloop 4,8 V JR |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm) |
| 1 x | LiIon Battery 3000 mAh 3.3v 15A (2 pcs) |
| 1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
| 1 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | Fiberglass tube 6/4x1000mm |
| 1 x | ABS tube 5.0x4.0x1000 mm |
| 1 x | Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm) |
| 1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | BALSA triangular 10x10x1000 mm |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | Balsa panel 6.0x100x1000 mm |
| 1 x | Balsa panel 2.5x100x1000 mm |
| 1 x | Landing gear Rocket 400 |
| 1 x | A/C economy plywood 600x300x6+.0 mm |
| 1 x | Balsa panel 10x100x1000 mm |
| 1 x | Lite Plywood panel 600x300x2.0 mm |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | A/C quality beech plywood 600x300x0.6 mm |
| 1 x | Birch plywood plate 600x300x2.5 mm |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | Birch plywood plate 600x300x1.2 mm |
| 1 x | Birch plywood plate 600x300x1.5 mm |
| 1 x | Jeti Black cap |
| 1 x | Combo FOXY C3530-700 + FOXY 80 amp |
| 1 x | Motor A40-14 L 14-Pole V4 |
| 1 x | Motor A30-12 L V4 |
| 1 x | Motor Mega AC 16/07/08 |
| 1 x | Motor Mega AC 22/45/02 E |
| 1 x | Motor Mega AC 16/15/04 |
| 1 x | Motor Mega AC 16/07/06 |
| 1 x | Motor Mega AC 16/30/01 |
| 1 x | Tank BULL MØ1 3L+14L Smoke (CMJets) |
| 1 x | Wing Joiner BULL MØ1 2.600mm |
| 1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
| 1 x | A40-10S V2 8-Pole + 6,7:1 PG |
| 1 x | Motor A40-10S V4 14-Pole |
| 1 x | Shaft for A60-L V4 |
| 1 x | 4 mm Prop Adapter M8 |
| 1 x | Motor B20-10 L + 4:1 gearbox |
| 1 x | Motor A20-22 L EVO |
| 1 x | Motor A10-7 L 4,4:1 |
| 1 x | Motor B40 10L + MAXON 4,4:1 Keramik |
| 1 x | Axle for motor A30-XL V2 |
| 1 x | Motor A200-6 |
| 1 x | Motor A50-10L Turnado V3 Glider |
| 1 x | Motor A20-26 M EVO |
| 1 x | A60-6XS V4 28-Pole |
| 1 x | Shaft for A60-XS-V2 (112,5mm) |
| 1 x | Shaft for A60-L (140mm) |
| 1 x | Motor A60-5XS V4 28-pole kv420 |
| 1 x | FOXY G2 C3530-700 |
| 1 x | Motor A50-14L Turnado V3 Glider |
| 1 x | Motor A30-14 M V2 6 Poles |
| 1 x | Motor B20-18 L + 4:1 gearbox |
| 1 x | Axle for motor A50-L |
| 1 x | Motor A20-6 XL 10-Pole EVO + 4,4:1 |
| 1 x | Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB |
| 1 x | Motor Mega AC 16/07/04 |
| 1 x | Motor Mega AC 16/07/03 |
| 1 x | Motor Mega AC 22/20/03 |
| 1 x | Motor Mega AC 16/15/02 |
| 1 x | Motor Mega AC 16/15/04 COMBAT |
| 1 x | Motor Mega AC 16/25/04 |
| 1 x | Mega Motor RC 400 F5J 1950KV |
| 1 x | Motor Mega AC 16/20/02 |
| 1 x | Motor Mega AC 16/25/06 |
| 1 x | Combo KAVAN PRO 3536-1000 + RAY 40 SB |
| 1 x | Motor Mega AC 16/15/03 |
| 1 x | Motor Mega AC 16/25/03 |
| 1 x | Motor Mega AC 16/25/02 |
| 1 x | Motor Mega AC 16/10/03 RACE |
| 1 x | Motor Mega AC 16/35/01 |
| 1 x | Set transmisions BULL Mo1 (dura/aluminium) |
| 1 x | Electric Landing Gear BULL Mo1 2.6 (Elektron Retracts) |
| 1 x | Electric Landing Gear "Black Edition" BULL Mo1 2.6 (Elektron Re |
| 1 x | Pipa 3D BULL MØ1 2.600mm |
| 1 x | Blade holder metal LAMA |
| 1 x | 57 mm white plastic spinner for fixed propeller / 4,0 mm axi |
| 1 x | F3A carbon 85 mm spinner for Hacker Q-80 |
| 1 x | Straightened rod Ø 0.5 mm x 1000 mm |
| 1 x | Straightened rod Ø 1.5 mm x 1000 mm |
| 1 x | Straightened rod Ø 1.2 mm x 1500 mm |
| 1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
| 1 x | Straightened rod Ø 3.0 mm x 1000 mm |
| 1 x | Spinner INO 89 mm Chrome (Imitacion metal) |
| 1 x | Spinner INO 57 mm Chrome (Imitacion metal) |
| 1 x | Spinner 82mm Black ventilado |
| 1 x | Spinner Alumin. fixed propeller 45 mm / 5,0 mm |
| 1 x | Nut for 515/518/519 spinner special for Hacker |
| 1 x | 38 mm white plastic spinner for fixed propeller / 4,0 mm axi |
| 1 x | 70 mm INO spinner (carbon imitation) |
| 1 x | Spinner INO 51 mm Chrome (Imitacion metal) |
| 1 x | Spinner INO 75 mm Chrome (Imitacion metal) |
| 1 x | F3A carbon 75 mm spinner for Hacker C-50 |
| 1 x | 120x60 mm SLH KOVO wheel |
| 1 x | Panasonic Eneloop AA 1,2 V battery 19>00 mAh |
 |
| 11,925.18EUR |
