1 x | USB Mini Camera endoscope |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
2 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Ball link M1.6 (6 uds) |
1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
2 x | Long ball link M3 (6 uds) |
1 x | 6 mm hexagonal ball link M3 (10 pcs) |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
3 x | Long ball link M2 (6 uds) |
1 x | Gates hinge 30x16 mm (2 pcs) |
2 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
1 x | Long pinned hinge (12 uds) |
2 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
2 x | Socket head ball link M3 (2 uds) |
1 x | Socket head long ball link M3 (6 uds) |
2 x | Blue metalic ball link M2/2 azul (2 pcs) |
2 x | M2,5 5Diam short black ball link V2 (2 pcs) |
2 x | Large flex hinge (12 uds) |
2 x | Socket head long ball link M3 (2 uds) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | BALSA triangular 6x6x1000 mm |
2 x | BALSA triangular 10x10x1000 mm |
2 x | Walnut wood slat 1.5x1.5x1000 mm |
2 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
2 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | BALSA trip 3.0x3.0x1000 mm |
2 x | BALSA trip 4.0x4.0x1000 mm |
2 x | BALSA trip 10x10x1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | BALSA leading edge 8x10x1000 mm |
2 x | Beech dowels 3.0 x 1000 mm |
3 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Interface Jack Adapter IKARUS |
1 x | RF9 Flight Simulator with Spektrum Controller |
1 x | Slave-cable USB Easy Sim |
1 x | Interface Realflight Simulator |
1 x | Simulador RealFlight RF-9.5 S (sin emisora) |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Tape GFK 25 mm |
3 x | Tester LiPo/LiIon/LiMn/LiFe |
1 x | Tester LiPo/LiIon/LiMn/LiFe |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Jet Afterburner Simulator NF-Jet3 RY |
1 x | Jet Afterburner Simulator NF-Jet2YY Set |
1 x | Propeller POWER-PROP 7x7 |
1 x | JEEMO Kit ARF Basic (2 color) - XTRALIGHT |
1 x | RX external cable for estandar receivers |
2 x | M3/5 Diam metal short ball link V3 (2 pcs) |
1 x | 15 mm reinforced hinge |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Lipo SMART 5000 mAh 4s 14.8v IC5 |
1 x | Battery RX JETI LiIon RB 3100 7.2v |
1 x | Ball link M3 (6 uds) |
1 x | 25 mm reinforced hinge |
2 x | Blue metalic ball link M3/3 azul (2 pcs) |
1 x | Long ball link M1.6 (6 uds) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | 800TVL CMOS camera for FPV |
2 x | XICOY X45 rail |
1 x | Indoor hinge with servo arm integraded |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Micro flex hinge (12 uds) |
3 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | Small pinned hinge (6 uds) |
2 x | Joint with bearing M3 22x5,5 |
1 x | Jeemo Dolly |
1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
1 x | Beech dowels 4.0 x 1000 mm |
2 x | M2,5 5Diam black ball link V2 (2 pcs) |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | Joint with bearing M2 22x5,5 |
2 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | M2 5Diam black ball link V2 (2 pcs) |
1 x | Ball link M2,5 (10 pcs) |
1 x | M3 Maxi ball link (2 uds) |
1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
1 x | Conector BEC female (10 pcs) |
1 x | Socket head ball link M3 (2 uds) |
1 x | Ball link M3 (10 pcs) |
2 x | Ball link M2 (10 pcs) |
1 x | Short ball link M3 (6 uds) |
1 x | BALSA trip 2.0x2.0x1000 mm |
3 x | M2,5 Diam metal ball link V3 (2 pcs) |
1 x | Tube Pitot to PIXHAWK |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
1 x | Lite Plywood panel 600x300x3.0 mm |
2 x | EasyFLY Addon |
1 x | OLED-Display for PowerBox Mercury SRS |
1 x | PowerBox Battery 4000 |
1 x | Extension for SensorSwitch 30cm |
1 x | PowerBox Competition |
1 x | Batetia LiFe 3200 mAh 6.6v MPX PowerBox |
1 x | POWERBOX Magic Jeti Switch Royal SRS, Champion SRS |
1 x | Power Box GPS Sensor III |
1 x | PowerBox MAG Sensor |
1 x | PowerBox iGyro SAT |
1 x | Prop Shaft Adapter 6 mm/M8 "long" 35 mm |
1 x | Aero-Master Cabine (Aero-naut) |
1 x | 10 mm Prop Adapter M12 |
1 x | SCHARNHORST accessories |
1 x | Aero-Master (Aero-naut) |
1 x | 5 mm Prop Adapter M8 |
1 x | 6 mm Prop Adapter M8 |
1 x | Alfileres de cobre 0,7 x 7 mm, aprox.50 g |
1 x | 3,2 mm Prop Adapter M6 |
1 x | 3,2 mm Prop Adapter M6 |
1 x | SCHARNHORST Battleship 1:200 |
1 x | Aero-Master Fuselage (Aero-naut) |
1 x | Legs + electric brakes for Viper Jet 1700 mm |
1 x | Baseplate servo |
1 x | Balsa panel 10x100x1000 mm |
1 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | Actuador lineal HLS12-100210-7.4v |
1 x | PT 20x13 EL Propeller |
1 x | Indoor landing gear set |
1 x | Angled clevis with threaded rod M3 |
1 x | Polyurethan FESTO hose 3x0,5 mm, transparent |
1 x | Fiberglass landing gear for 140-160 |
1 x | Faucet FESTO |
1 x | Body for landing gear Ø 3 mm |
1 x | Body for landing gear Ø 4 mm |
1 x | Festo 6mm Tubing Holder (10 uds) |
1 x | Robart Door Hinge (Pk2) |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Avia spare blue cockpit (Top Model) |
1 x | Set stickers JEEMO "Andy" |
1 x | Fail Safe air retract |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | U Profile ABS 5,0x10,0x1000 mm |
1 x | Short ball link M1.6 (6 uds) |
1 x | M3 Maxi ball link (2 uds) |
1 x | SIMtransmitter 6 Mode 2 |
|
6,344.66EUR |