| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
| 1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
| 1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 1 x | ABS tube 5.0x4.0x156 mm |
| 2 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
| 3 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 2 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | ABS tube 12.0x10.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
| 2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | Horn with ball 55x40 |
| 1 x | Horn 16,5x20 mm (2 pcs) |
| 2 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
| 2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
| 1 x | 6 mm red aluminium threaded horn with patella |
| 2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
| 1 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
| 2 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
| 1 x | ABS tube 5.0x3.0x1000 mm |
| 1 x | ABS tube 14.0x10.0x1000 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
| 1 x | Brass control horn M2 short for wire (2 pcs) |
| 1 x | Horn 5/10 with M2 Bearing |
| 1 x | ABS tube 4.0x3.0x1000 mm |
| 1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | ABS tube 18.0x16.0x1000 mm |
| 2 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
| 2 x | ABS tube 5.0x4.0x1000 mm |
| 1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
| 1 x | Horn 6/20 with M3 Bearing |
| 1 x | LH long black aluminium horn L31xH30 (2pcs) |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
| 1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 2 x | Horn 13,5x16 mm (2 pcs) |
| 2 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 3 x | RH long aluminium horn (2pcs) |
| 2 x | Brass control horn M4 short for wire (4 pcs) |
| 2 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 2 x | Optical RPM Sensor |
| 2 x | Ball link M3 (10 pcs) |
| 1 x | Ball link M2 (10 pcs) |
| 3 x | Joint with bearing M2,5 22x5,5 |
| 2 x | M2 5Diam black ball link V2 (2 pcs) |
| 3 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
| 1 x | Short ball link M3 (6 uds) |
| 1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
| 1 x | Kwik link AL M3 con Clip (2 pcs) |
| 1 x | White smoke canister 140 g |
| 1 x | White smoke bombs AX-18 (5 pcs) |
| 1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
| 1 x | "S" set for planes |
| 1 x | AX-60 starters (5 pcs) |
| 1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
| 1 x | Parachutist |
| 1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
| 1 x | Electric rocket starters (6 pcs) |
| 1 x | Smoke set "Glider" |
| 2 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
| 1 x | "M" set |
| 1 x | Aluminium red ball links M3 V1 (10 pcs) |
| 1 x | White smoke bombs AX-9 (10 pcs) |
| 1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
| 1 x | Green smoke canister 65 g |
| 1 x | Extinguisher CO2 - 2 Kg |
| 1 x | Strip ABS 2.0x3.0x1000 mm |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 1 x | Carbon fiber rod 2.5 mmx1000 mm |
| 1 x | Oracover ROYAL RED 2m |
| 1 x | Spray adhesive INFUTAC (Clear) 500 ml |
| 1 x | Hitec 30 mm servo rounded arm |
| 1 x | Programador FUTABA USB CIU-3 |
| 1 x | Futaba BLS152 - Upper Case |
| 2 x | 13 mm wing servo holder |
| 1 x | SSPS105 Super Hi-Power servo |
| 3 x | Servo TOPMODEL STANDARD S3217 |
| 1 x | Servo FUTABA BLS175 SV |
| 1 x | Futaba BLS255/272/471SV - Gear Set |
| 1 x | Hitec 46 mm servo arm with ball link |
| 1 x | Futaba 2x20 mm servo double arm |
| 1 x | Servo BLUE Bird BLS-H71B v2 |
| 2 x | Servo GO-10S41MG 10.5 kg.cm 0.075s/60º |
| 1 x | Servo TT ACE SHV 1504 MG |
| 1 x | 89 mm double servo arm with bearing (2 pcs) |
| 2 x | Small aluminium horn red (2pcs) |
| 1 x | Horn 5/20 with M2 Bearing |
| 1 x | ABS tube 3.0x1.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
| 1 x | Brass control horn M4 short for wire (10pcs) |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | 6 mm blue aluminium threaded horn with patella |
| 1 x | Styrene plate 320x120x1.0 mm |
| 1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
| 1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
| 1 x | ABS tube 7.0x6.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | ABS tube 10.0x8.0x1000 mm |
| 1 x | Small aluminium horn gold (2pcs) |
| 1 x | Brass control horn M2 large for wire (2pcs) |
| 1 x | Horn micro type4 Ø 0,5 (2 pcs) |
| 1 x | Short adjustable control horn 3x24 |
| 1 x | Rudder forward 70x28 "type Kato" |
| 1 x | Medium extra-strong control horn with bearing 2,8x24 |
| 1 x | Carbon Non-Woven, 245 g/m² 125 cm x 20 m |
| 1 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
| 2 x | Stickers-digit for marking |
| 1 x | Small control horn with bearing (2 pcs) |
| 1 x | Short extra-strong control horn with bearing 2,8x15 |
| 1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
| 1 x | Carbon plate 350x150x0.5 mm |
| 1 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
| 1 x | Adjustable brass horn threaded M3 |
| 1 x | 6 mm aluminium horn with patella |
| 2 x | DYNAMOMETER S-1580 |
| 1 x | Glass fibre sleeve Ø 20 mm X 10m |
| 2 x | Carbon plate 350x150x1.5 mm |
| 3 x | Socket head long ball link M3 (2 uds) |
| 2 x | Short ball link M1.6 (6 uds) |
| 4 x | M2 5Diam short black ball link V2 (2 pcs) |
| 2 x | Ball link M2,5 (10 pcs) |
| 1 x | Long ball link M3 (6 uds) |
| 2 x | Ball link M1.6 (6 uds) |
| 2 x | M2,5 5Diam black ball link V2 (2 pcs) |
| 1 x | Long ball link M1.6 (6 uds) |
| 3 x | Joint with bearing M3 22x5,5 |
| 1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
| 2 x | M3/5 Diam metal short ball link V3 (2 pcs) |
| 1 x | Socket head ball link M3 (2 uds) |
| 1 x | Ball link M3 RPA's-UAV's |
| 1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
| 1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Porta Kwik link M4 4 mm (2 pcs) |
| 1 x | Z type of cable coupler Ø 1.8 (2 uds) |
| 1 x | LA500 cyclic central part |
| 1 x | Baal link 4/14/4 (5 pcs) |
| 1 x | LA500 nose |
| 1 x | LA500 housing-lower cyclic |
| 1 x | LA500 pre-rotation gear |
| 1 x | LA500 freewheel bearing |
| 1 x | ZEUS F3A 2m |
| 1 x | PBS TJ 40-G1 Turbine |
| 1 x | LA500 housing-upper cyclic |
| 1 x | Receiver bed (Blue) |
| 1 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
| 1 x | Rudder 2_Tray 4.5~5 inch |
| 1 x | Pulley brass 10/2 (2 pcs) |
| 1 x | Porta Kwik link M4 3 mm (2 pcs) |
| 1 x | Z type of cable coupler Ø 1 (2 uds) |
| 1 x | Futaba 38 mm servo arm |
| 1 x | Futaba 25 mm servo arm with M3 ball link |
| 1 x | Hitec 25 mm servo arm with M3 ball link |
| 1 x | Servo TOPMODEL DS9010 T |
| 2 x | 57 mm micro-mini servo cover |
| 2 x | 58 mm micro servo cover |
| 1 x | Crystal Universal RX 35.020 Ch 62 |
| 1 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
| 1 x | XTorque CFK Servohebel 38 HITEC 25T |
| 1 x | Futaba 25 mm servo arm with ball link |
| 1 x | Futaba 17 mm servo arm with ball link HITEC |
| 1 x | HITEC 20 mm servo arm with ball link |
| 1 x | Vertical servo holder |
| 2 x | 65 mm mini servo cover |
| 1 x | XTorque CFK Servohebel 38 |
| 1 x | Vertical mounting servo holder |
| 2 x | 18 mm wing servo holder |
| 1 x | 11 mm wing servo holder |
| 1 x | 90x75 mm standart servo cover |
| 1 x | Servo TOPMODEL DS1413 T |
| 1 x | Logo 400 SE VBar |
| 1 x | Servo TOPMODEL S7520 MG |
| 1 x | SAVOX SH 0254 servo |
| 1 x | PPS-4D Propeller |
| 1 x | Interface Jack Adapter IKARUS |
| 1 x | Crystal Universal RX 35.120 Ch 72 |
| 1 x | EasyFLY Addon |
| 1 x | Micro Crystal RX 35.010 Ch 61 |
| 1 x | GameCommander USB Universal |
| 1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
| 1 x | IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD |
| 1 x | Micro Crystal RX 35.120 Ch 72 |
| 1 x | Slave-cable USB Easy Sim |
| 1 x | Crystal Universal TX 35.140 Ch 74 |
| 1 x | Servo NARO Max Std |
| 1 x | Servo GO-1088MGW 74 kg.cm 0.125s/60º |
| 1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
| 1 x | DUPLEX MUI 30 Sensor |
| 1 x | DUPLEX 2.4EX MU 3 Sensor |
| 1 x | Fibra de vidrio 80 g/m² (3 m x 100 cm) |
| 1 x | Carbon plate 350x150x1.0 mm |
| 1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 10m |
| 1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 5m |
| 1 x | Peel ply 95 g/m² (plain weave) 20 mm x 100 m |
| 1 x | Fiberglass plate 620x540x1,0 mm |
| 1 x | Chopped glass fibre strands 0.2 mm |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 1 x | Teflon rollers 80 mm x 15 mm Diam. |
| 1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m |
| 1 x | Fiberglass plate 620x540x0,2 mm |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
| 1 x | Glass fibre braided sleeve (45mm) roll 20m |
| 1 x | Peel ply 100 g/m² (plain weave) 50 cm x 2m |
| 1 x | Fiberglass 5000x1100 mm 49 g/m² |
| 1 x | Servo GO-12S69MG 26kg.cm 0.10s/60º |
| 2 x | CF tube set (Ø 38 mm y Ø 14 mm) |
| 1 x | Katana Mini carbon wheel pants (2 pcs) |
| 1 x | DUPLEX TGs 2,4 GHz (transmitter module) |
| 1 x | Suport PITOT |
| 1 x | Duplex 2.4 EX TopFuel MTAG Battery Reader |
| 1 x | DUPLEX MUI 50 Sensor |
| 1 x | ABS tube 4.0x2.0x1000 mm |
| 1 x | DUPLEX 2.4EX MAlti (Rev.2) |
| 1 x | DUPLEX USB Adapter |
| 1 x | Receptor DUPLEX REX R9 Slim |
| 1 x | DUPLEX R14 receiver 2,4GHz |
| 1 x | Receiver DUPLEX R4H EX 2.4 GHz |
| 1 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
| 1 x | Parachute expulsion foam |
| 1 x | Oratex Natural White 2m |
| 2 x | Oracover light Grey 2m |
| 1 x | Aluminium wide washer M3 blue (4 pcs) |
| 1 x | Frontal Adapter for AXI53xx |
| 1 x | AXI Cooler 41xx |
| 2 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
| 1 x | Oracover Black 10 m |
| 1 x | Oracover GREY Seafire Sea 2m |
| 1 x | Teflon rollers 40 mm x 15 mm Diam. |
| 1 x | Glass fibre braided sleeve (45mm) roll 10m |
| 1 x | Buy Perforated film 100 cm / 20 m |
| 1 x | Carbon plate 350x150x2.0 mm |
| 1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
| 1 x | Buy Perforated film 100 cm / 10 m |
| 1 x | Glass fabric 49 g/m² (1,27 x 5 m) |
| 1 x | Fiberglass plate 350x150x2.0 mm |
| 1 x | Fibra de vidrio 80 g/m² (5 m x 100 cm) |
| 1 x | Glass fibre sleeve Ø 20 mm X 20m |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
| 1 x | Fiberglass plate 620x540x0,3 mm |
| 1 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
| 1 x | Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA) |
| 1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
| 1 x | Ball link M3 (6 uds) |
| 1 x | 6 mm ball link M3 (10 pcs) |
| 1 x | Blue metalic ball link M3/3 azul (2 pcs) |
| 1 x | 6 mm hexagonal ball link M3 (10 pcs) |
| 1 x | Long ball link M2 (6 uds) |
| 1 x | M3 Maxi ball link (2 uds) |
| 1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
| 1 x | Soporte metal para servos |
 |
| 31,223.19EUR |
