| 2 x | Screwdriver for Hexagon 1,5mm |
| 2 x | Starter Sullivan-STAR 601 |
| 1 x | Vacuum pump P1-N |
| 2 x | Starter EM Gear Power 250 |
| 1 x | |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
| 1 x | Hot Glue Stick GREEN |
| 1 x | Starter 12v (Max 180 and 30ccm) |
| 1 x | Hot Glue Stick RED |
| 1 x | Screwdriver for Hexagon 1,27mm |
| 3 x | Starter Sullivan-STAR 603 DINATRON |
| 1 x | Digital scale up to 40 kg |
| 2 x | 3,0x60 mm allen screwdriver |
| 1 x | |
| 1 x | Copier 2x20 cm pcs |
| 2 x | Copier 5x20 cm pcs |
| 1 x | Vacuum pump 12 CFM |
| 1 x | Disposable Injector Bags (30x16cm) 100 pcs |
| 2 x | 1,5x50 mm allen screwdriver |
| 1 x | 2,0x50 mm allen screwdriver |
| 1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
| 1 x | Crimping tool |
| 1 x | Dust collector for mould cleaning |
| 1 x | Starter EM Gear Power 80 |
| 1 x | Hot Glue Stick BLACK |
| 3 x | Glases Ace |
| 2 x | Big-Malibu XL Roof box with surfboard rack GREY |
| 1 x | Glases Nimbus "Black" |
| 2 x | Glases Innovation Plus |
| 2 x | Hobbylite Filler, Balsa colour |
| 1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
| 1 x | Ball link duraluminium M3 V1 (10 pcs) |
| 1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
| 1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
| 1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
| 1 x | 20x1000 mm Ring Strap Back To Back |
| 2 x | SE Ring 200 mm (2 pcs) |
| 1 x | SE Ring 480 mm (2 pcs) |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | SE Ring 360 mm (2 pcs) |
| 3 x | Tape GFK 38 mm |
| 1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | 20cm Flexible Stainless Steel Exhaust Tubing D=25mm |
| 1 x | Circlick securite |
| 2 x | XT-60 Plug Mold |
| 1 x | Z Bender - S Type Tool |
| 1 x | Digital precision scale up to 2000 g |
| 1 x | Z Bender - S Type Tool |
| 1 x | Concave-Convex sandpaper file 13 mm |
| 1 x | Dremel PERMAGRIT 18 mm round lime |
| 1 x | Dremel 3000 130W |
| 1 x | Sandpaper file 13 mm |
| 1 x | Heli blades angle measurer |
| 1 x | Latex Gloves GRIP, size L, box/ 100 pcs |
| 1 x | Rubber Insert hard, 1 Pcs. |
| 1 x | Actuador lineal HLS12-100210-7.4v |
| 2 x | Glases Nimbus |
| 1 x | Cut tube |
| 1 x | SE Ring HACKER 300 mm (2 pcs) |
| 2 x | SE Ring 350 mm (2 pcs) |
| 2 x | SE Ring 450 mm (2 pcs) |
| 1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 2 x | SE Ring 330 mm (4 pcs) |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
| 1 x | SE Ring 400 mm (2 pcs) |
| 1 x | Ball Link Plier |
| 1 x | Marker ties (20 pcs) |
| 2 x | 4 mm Prop Adapter M8 |
| 2 x | 3,2 mm Prop Adapter M8 |
| 1 x | Prop Shaft Adapter 5 mm "long" |
| 2 x | 10 mm Prop Adapter M12 |
| 1 x | Propeller drill jig DA-35/50/60/70 |
| 1 x | Mold plugs XT-30 |
| 1 x | 3,2 mm Prop Adapter M6 |
| 1 x | Prop Shaft Adapter 8 mm/M12 "long" |
| 2 x | 2,3 mm Prop Adapter M6 |
| 3 x | 2.3 mm Adapter for 30 mm spinners |
| 1 x | Prop Shaft Adapter 4 mm/M8 "long" 35 mm |
| 3 x | 3.2 mm Prop Adapter M6 |
| 1 x | 4 mm Prop Adapter CN-Spinner |
| 2 x | 5 mm Prop Adapter CN-Spinner |
| 1 x | 3.2 mm Prop Adapter M8 |
| 1 x | 5 mm Prop Adapter M6 |
| 1 x | Tirpiz Battleship 1:200 |
| 1 x | La Capitania di Venetia accesories |
| 2 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
| 1 x | JETImodel Addcap 1640 |
| 1 x | FesEx-Uni6 System |
| 1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
| 1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
| 2 x | Xoar Electric Beechwood Prop 20x10 |
| 1 x | FesEx-Uni8 System |
| 1 x | A60 Motor Mount Alu complete set |
| 1 x | TP/TopFuel - XH 2/3S Adapter |
| 2 x | 3 mm Prop Adapter M6 |
| 1 x | 3,2 mm Prop Adapter M6 |
| 2 x | Prop Shaft Adapter 6 mm/M8 "long" 35 mm |
| 1 x | Alfileres de cobre 0,7 x 7 mm, aprox.50 g |
| 1 x | Stick coupler Ms 15 mm |
| 1 x | 6 mm Prop Adapter M8 |
| 1 x | 4 mm Prop Adapter M6 |
| 1 x | 2 mm Prop Adapter M6 |
| 1 x | 4 mm Prop Adapter M8 |
| 1 x | SCHARNHORST Battleship 1:200 |
| 1 x | 6 mm Prop Adapter M8 |
| 1 x | Aero-Master Wings (Aero-naut) |
| 1 x | Aero-Master Fuselage (Aero-naut) |
| 1 x | MG cannon 1.8 cm (5 pcs) |
| 1 x | SCHARNHORST accessories |
| 1 x | 5 mm Prop Adapter M8 |
| 1 x | Propadapter for motor A50-V3 |
| 1 x | Shaft for A60-XS-V2 (112,5mm) |
| 1 x | Battery charging cable XT60 |
| 1 x | Shaft for A60-L V4 |
| 1 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 1 x | Turbo light spinner cap white 32mm |
| 1 x | Battery LiFe TopFuel 3100 mAh 4s MTAG 30C |
| 1 x | Battery LiFe TopFuel 3100 mAh 2s MTAG 30C |
| 1 x | Battery LiFe TopFuel 3100 mAh 3s MTAG 30C |
| 1 x | Axle for motor A50-L |
| 1 x | EDF Stream-Fan 110mm kv780 |
| 1 x | Propadapter for motor A60-V2 |
| 1 x | Shaft for A60-20/22/24S (120 mm) |
| 1 x | Axle for motor A30-XL V2 |
| 1 x | DUPLEX 2.4EX RC Switch |
| 2 x | Cable adapter iCharger |
| 1 x | Shaft for A60-L (140mm) |
| 1 x | Axle for motor A20-S (3 uds) |
| 1 x | Propadapter for motor A50 |
| 1 x | Alu-Cross for Backmount of A60-V2-Backmountmotors |
| 1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
| 1 x | JETImodel Addcap 820 |
| 1 x | Screwdriver for Torx® TX8 |
| 1 x | Tape GFK 50 mm |
| 1 x | Ciano KAVAN Thick 20g |
| 1 x | Engine mounts for .09 - .19 engine |
| 1 x | Fresa corte diamante Ø 2.35mm (flame) |
| 1 x | 19x10 BIELA propeller (3-blades) |
| 1 x | BIELA 25x10 WILGA Propellers |
| 1 x | DUPLEX R6 EX receiver 2,4GHz |
| 1 x | Bidule 170 ARF 3.48 m |
| 1 x | SE Ring 250 mm (2 pcs) |
| 1 x | FALCON 25X9 CARBON PROPELLER (GAS) |
| 1 x | FALCON 28X10 CARBON PROPELLER (GAS) |
| 1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
| 1 x | 65 mm mini servo cover |
| 1 x | Spikes Band (5 m) |
| 1 x | Bidule 55 2460 mm Cabina |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Albatros ,spare cockpit (Top Model) |
| 1 x | Brazo servo KAVAN doble aluminio 25T - 2.5" M3 |
| 1 x | 22x10 BIELA propeller |
| 1 x | 21x12D BIELA propeller (3-blades) |
| 1 x | Receiver CORE PBR-26D 26ch |
| 1 x | Angle of incidence meter |
| 1 x | Fast'n EZ-CA-Hinge (12 uds) |
| 1 x | Extra Hard Titanium Herxagon Screwdrivers |
| 1 x | Ventus 1:4 set of instruments |
| 1 x | PROXXON - SAW BLADE (50MM - 20T) (28017) |
| 1 x | Propeller diller 5/6,3/8/9 |
| 1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
| 1 x | Satellite receiver DUPLEX Rsat 900 NG MHz |
| 1 x | DUPLEX R7 receiver REX Assist |
| 1 x | 12 mm mast holder |
| 2 x | A60-6XS V4 28-Pole |
| 2 x | A40-10S V2 8-Pole + 6,7:1 PG |
| 1 x | A30-M/L/XL Backmountset complete |
| 1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
| 1 x | Cyano INSTA - FLEX+™ (25g) |
| 1 x | Spinner propeller pleg. 30 mm / 5,0 mm |
| 1 x | White spinner propeller pleg. 42 mm / 5 mm |
| 1 x | Ancla 40 x 24 mm (2 pcs) |
| 1 x | AXI 2808/24 V2 Long |
| 1 x | Spinner 3BL propeller pleg. 42 mm / 6,0 mm |
| 1 x | Spinner red 36-38 mm |
| 1 x | Spinner 3BL propeller pleg. 36 mm / 6,0 mm |
| 1 x | Motor A10-7 L 4,4:1 |
| 1 x | AXI 2826/8 V2 Long |
| 1 x | Dumper propeller 6/8 mm |
| 1 x | Ciano KAVAN Medium 20g |
| 1 x | Ciano KAVAN Super Thin 20g |
| 1 x | Spinner plastic black fixed propeller 30 mm |
| 1 x | Motor A200-6 |
| 1 x | TopFuel LiPo 35C-POWER-X 2400mAh 2S |
| 1 x | LiPo TopFuel ECO-X 5000 mAh 3s 20C MTAG |
| 1 x | TopFuel LiPo 20C-ECO-X 5000mAh 4S MTAG |
| 1 x | Motor A50-16 S V4 |
| 1 x | TopFuel LiPo 35C-X 5000mAh 6S |
| 1 x | Central piece 38 mm 0º |
| 1 x | Program card KAVAN PRO |
| 1 x | 290 mm 8x4 M4 shaft ship |
| 1 x | 12x8 tree blades propeller |
| 1 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 1 x | Canopy F9F Panther (Aero-naut) |
| 1 x | 300x4 mm M4 shaft ship |
| 1 x | A40 Backmountset complete |
| 1 x | Aluminium Hub "Z" for folding Props 38 mm M8 Shaft 8 mm |
| 1 x | DUPLEX 2,4EX Stick with Potentiometer for Transmitter DC/DS |
| 1 x | Bearings for motors hacker A50 |
| 1 x | Esc MasterBasic 55SB |
| 1 x | Esc MasterBasic 40SB |
| 1 x | Heli digital angle measurer |
| 1 x | Catalyst INSTA - SET™ (60g) |
| 1 x | ExtraCA Top |
| 1 x | Aluminum Fold Prop Spinner 40 mm / 5mm |
| 1 x | GM Propellers Spinner Scale ø 45mm Diameter, Motor shaft ø 6mm C |
| 1 x | Spinner propeller pleg. 36 mm/6,0 mm/5º |
| 1 x | Spinner Alumin. propeller pleg. 40 mm / 4,0 mm |
| 1 x | Spare white 38-45 mm spinner |
| 1 x | Spinner propeller pleg. 30 mm / 2,3 mm |
| 1 x | 38 mm Alu spinner 5 mm pleg. propeller |
| 1 x | Epoxy QUIK-CURE™ 5 min (260g) |
| 1 x | Motor A30-10 XL V4 |
| 1 x | Cyano INSTA - CURE™ (225g) |
| 1 x | Spinner plastic red fixed propeller 30 mm |
| 1 x | Spinner 3BL propeller pleg. 40 mm / 6,0 mm |
| 1 x | 36 mm red plastic spinner for fixed propeller |
| 1 x | AXI 2826/6 V2 Long |
| 1 x | Motor A50-14 L 8-Polos Electric turbine |
| 1 x | Thread locker IC-Loc™ red "high" 10 ml |
| 1 x | Aero-Master (Aero-naut) |
| 1 x | Epoxy SLOW-CURE™ 30 min (130g) |
| 1 x | TopFuel LiPo 20C-ECO-X 5000mAh 6S |
| 1 x | Xoar Electric Beechwood Prop 21x10 |
 |
| 16,785.22EUR |
