| 1 x | Optical RPM Sensor |
| 2 x | DYNAMOMETER S-1580 |
| 1 x | Vest clothes Hispano Aviación |
| 1 x | Cap Hispano Aviación |
| 1 x | Shirt Hispano Aviación |
| 1 x | Extinguisher CO2 - 2 Kg |
| 1 x | Quicklock washer 2 mm (10 pcs) |
| 1 x | M3 black washers (4 pcs) |
| 1 x | Spring lock washer 2.1 mm (20 pcs) |
| 2 x | M3-M4 rubber washer (8 pcs) |
| 1 x | Aluminium wide washer M3 blue (4 pcs) |
| 1 x | Circlik for shaft 1.2 mm (10 pcs) |
| 1 x | Quicklock washer 1 mm (10 pcs) |
| 1 x | Aluminium wide washer M4 Black (4 pcs) |
| 1 x | Aluminium wide washer M3 gold (4 pcs) |
| 1 x | Aluminium cap bolt washer M4 red (8 pcs) |
| 1 x | Spring lock washer 2.6 mm (20 pcs) |
| 1 x | Lock washer 2.7 mm (20 pcs) |
| 1 x | Aluminium wide washer M4 Red (4 pcs) |
| 1 x | Quicklock washer 4 mm (10 pcs) |
| 1 x | Quicklock washer 3 mm (10 pcs) |
| 1 x | Quicklock washer 1.5 mm (10 pcs) |
| 1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
| 1 x | Flat washer 2.7 mm (20 uds)pcs) |
| 1 x | Quicklock washer 3.5 mm (10 pcs) |
| 1 x | Aluminium cap bolt washer M3 black (8 pcs) |
| 1 x | Aluminium cap bolt washer M3 red (8 pcs) |
| 1 x | Lock washer 4.3 mm (20 pcs) |
| 1 x | 1/10 Pilot "Jack" |
| 1 x | Piloto Jet "Red" 1/6 Scale |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
| 2 x | 1/12 Pilot "Fighter" |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 2 x | Civilian pilot "Pamela" size 9cm (Slimline) |
| 1 x | 1/12 Pilot "Cougar" |
| 2 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 1 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
| 1 x | 1/4 Pilot "Heidi" |
| 2 x | Piloto Jet "Green" 1/6 Scale |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
| 1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
| 1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
| 1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | 1/12 Pilot "Langley" |
| 1 x | Pilot "Dick" Legends Series (Slimline) |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | 1/12 Pilot "Tom" |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 2 x | 1/7 Pilot "Japanese" |
| 1 x | Civilian pilot "Curt" size 9cm (Slimline) |
| 1 x | Pilot "Duke" Legends Series (Slimline) |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 2 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 3 x | 1/10 Pilot "Jimmy" |
| 2 x | 1/6 Pilot "John" |
| 2 x | Civilian pilot "G-Man" size 9cm (Slimline) |
| 1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | 1/4 Pilot "Mike" |
| 1 x | Carbon roving DowAksa / 24k / 1600 tex |
| 2 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 2 x | Piloto JET 1:3,5 |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 2 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | Brass control horn M4 short for wire (10pcs) |
| 1 x | Xplorer3 anemometro |
| 1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
| 1 x | Tape GFK 50 mm |
| 1 x | Softshell Hispano Aviación |
| 1 x | Flat washer 1.7 mm (20 pcs) |
| 1 x | PRO-HV Dual Action Valve |
| 1 x | Nylon gear block Ø 4 mm (2 uds) |
| 1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
| 1 x | Nylon gear block Ø 3 mm (2 uds) |
| 1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
| 1 x | Manometer 4 mm |
| 2 x | Quick hose connector 4-4 mm |
| 1 x | Quick hose connector 3-3 mm |
| 2 x | Trailing leg 131 mm |
| 1 x | Landing gear axle Ø 4 mm (2 uds) |
| 1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
| 1 x | Nylon threaded block M4 (2 uds) |
| 1 x | Angled clevis with threaded rod M3 |
| 1 x | Titanium M3x0,5x12 mm Flat Head screw (4 pcs) |
| 1 x | Blue Aluminium lock nut M4 (4 pcs) |
| 1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs) |
| 1 x | Titanium M3x0,5x6 mm Flat Head screw (4 pcs) |
| 1 x | Screw M2x8 (10 pcs) |
| 1 x | Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox |
| 1 x | Stickers-digit for marking |
| 1 x | Hovercraft sailcloth |
| 1 x | Blue Aluminium lock nut M3 (4 pcs) |
| 1 x | Servo M2x7/16 screw (4 pcs) |
| 1 x | Nylon Screw M6x40 |
| 1 x | Nylon Screw M5x30 |
| 1 x | ABS 500 x 400 x 1,5 mm (white) |
| 1 x | Tapping Screw M2.2x65 (10 pcs) |
| 1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
| 1 x | 1/6 Pilot "Tony" |
| 1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
| 1 x | Foam plastic plates (310x210x2 mm) |
| 1 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
| 1 x | Propeller diller for DLE111 and DA85-150 |
| 1 x | Giant Scale Muffler D.A. 70 |
| 1 x | Rudder forward 70x28 "type Kato" |
| 1 x | Peel ply 100 g/m² (plain weave) 50 cm x 2m |
| 1 x | Peel ply 95 g/m² (plain weave) 100 mm x 100 m |
| 1 x | Junta humo metalica G30 (DLE30/DLE60) |
| 1 x | RH long aluminium horn (2pcs) |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
| 1 x | Small adjustable aluminium control horn with bearing 2,8x15 |
| 1 x | Panel Honeycom carbon 350x150x3.5mm |
| 1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
| 1 x | Micro control horn (2 pcs) |
| 1 x | O-ring Saito FG-73 5cyl |
| 1 x | Junta humo metalica G61 (DLE55RA/DLE61/DLE120) |
| 1 x | Propadapter for motor A60-V2 |
| 2 x | Alu-Cross for Backmount of A60-V2-Backmountmotors |
| 1 x | Propeller POWER-PROP 12x9 |
| 1 x | Porpeller HUNTER 480 |
| 1 x | Propeller electric carbon 9.5x7 |
| 1 x | Spinner fixed propeller 60 mm / 5,0 mm |
| 1 x | Ball joint long |
| 1 x | Head upper part |
| 1 x | Propeller electric carbon 8.5x5 |
| 1 x | Propeller POWER-PROP 14x8 |
| 1 x | Propeller POWER-PROP 10x7 Izda |
| 1 x | Propeller POWER-PROP 12x6 |
| 1 x | Propeller POWER-PROP 14x9 |
| 1 x | Propeller electric carbon 6.5x4 |
| 1 x | Propeller POWER-PROP 10x6 |
| 1 x | Propeller POWER-PROP 13x9 Izda |
| 1 x | Propeller POWER-PROP 15x8 |
| 2 x | Propeller POWER-PROP 11x9 |
| 1 x | Propeller POWER-PROP 13x9 |
| 1 x | Propeller POWER-PROP 16x10 |
| 1 x | Porpeller HUNTER 400 |
| 2 x | Propeller electric carbon 7x7 |
| 1 x | Propeller electric carbon 8.5x7 |
| 1 x | Propeller POWER-PROP 11x8 |
| 1 x | Propeller POWER-PROP 13x8 |
| 1 x | Propeller POWER-PROP 10x7 |
| 1 x | Propeller electric carbon 9.5x6 |
| 1 x | Propeller electric carbon 10.5x8 |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | Propeller 9x7 SlowFlyer |
| 1 x | Propeller 8x4,3 SlowFlyer |
| 3 x | PropCover 16-20" (1 pcs) |
| 1 x | Propeller 8x4 Electric |
| 3 x | Propeller MEJZLIK 21x10 Electric light (36 g) |
| 1 x | Propeller 9x4,7 SlowFlyer |
| 2 x | Propeller MEJZLIK 20x13 Electric light (41 g) |
| 2 x | Propeller 3x2 |
| 1 x | Washer 2.2×4 |
| 1 x | Bearing 3x6x2,5 |
| 1 x | Rudder |
| 1 x | Bearing housing |
| 1 x | Blade holder center |
| 2 x | Balls 4 mm |
| 1 x | Screw M3x16 |
| 1 x | Motor wall |
| 1 x | Baering 3x8x4 |
| 1 x | Rotor Mast |
| 1 x | Steel Screw M1x8 (10 pcs) |
| 1 x | Raer wall |
| 2 x | Blade holder upper |
| 1 x | Blade holder lower |
| 1 x | Nut M1,6 |
| 1 x | Nut M2 securing |
| 1 x | Rotorhead pushrod |
| 1 x | Tail boom |
| 1 x | Head core |
| 1 x | Steering lever |
| 1 x | Side Plate |
| 1 x | Screws M1,6x6 Allen |
| 2 x | Head lower part New |
| 1 x | Rotorshape Elevator |
| 1 x | Grub screw M3x3 shouldered (2 pcs) |
| 2 x | Head runner |
| 1 x | Electric coversion set |
| 1 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
| 1 x | Racor 4/6 mm |
| 1 x | Buy Perforated film 100 cm / 10 m |
| 1 x | Carbon plate 350x150x1.0 mm |
| 1 x | Propadapter for motor A50 |
| 1 x | Blocking screws M6 gas engine |
| 1 x | Size "M" motor holder for class 400 |
| 1 x | A50 Motor Mount Alu complete set |
| 1 x | Fiberglass motor-holder for electric motors |
| 1 x | Size "M" motor holder for class 400 |
| 1 x | Motor mount for 1200 mm models |
| 1 x | Ø 40 mm fiberglass motor-holder for electric motors |
| 1 x | Central support Speed 600 |
| 1 x | Frontal support Speed 280 |
| 1 x | Mini neumatic retract 3 mm landing gear (Het-rc) |
| 1 x | Mini neumatic retract landing gear |
| 1 x | 40 mm air cylinder |
| 1 x | Futaba 25 mm servo arm with M3 ball link |
| 1 x | 6 mm hexagonal ball link M3 (10 pcs) |
| 1 x | FUTABA 20 mm servo arm with ball link |
| 1 x | HITEC 17 mm servo arm with ball link HITEC |
| 1 x | 6 mm ball link M3 (10 pcs) |
| 1 x | Air pressure gauge |
| 1 x | Futaba 52 mm servo arm |
| 1 x | Futaba 20 mm servo arm |
| 1 x | 6 mm M3 variable horn |
| 1 x | 5 mm M2 variable horn |
| 1 x | Ball link M3 (10 pcs) |
| 1 x | Wheel cover holder Ø 4 mm (2 uds) |
| 1 x | Servo arm with 5 mm hole to FEMA 9810A |
| 1 x | Tap FESTO 4-4 mm |
| 1 x | Wheel collar 4 mm Ø (4 uds) |
| 1 x | 20-25mm Servo Arm |
| 1 x | Peel ply 95 g/m² (plain weave) 20 mm x 100 m |
| 1 x | Chopped glass fibre strands 0.2 mm |
| 1 x | Fiberglass plate 620x540x1,0 mm |
| 1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 10m |
| 1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
| 1 x | Fiberglass plate 350x150x3.0 mm |
| 1 x | Fiberglass 5000x1100 mm 49 g/m² |
| 1 x | Carbon plate 350x150x3.0 mm |
| 1 x | Propeller electric carbon 10x7 |
| 1 x | Propeller MEJZLIK 20x10 Electric light (36 g) |
| 1 x | Head lower part |
| 1 x | Extractor piñones 2.3/3.2 mm |
| 1 x | Fibreglass-Spinner BS ∅155 x 200 mm |
| 1 x | HOPPER tank Digitech 250 ml (Festo nipples 6 mm) |
| 1 x | Propeller POWER-PROP 11x6 |
| 2 x | Propeller MEJZLIK 22x10 Electric light (36 g) |
| 1 x | Head core bushing |
| 1 x | Propeller MEJZLIK 9,5x3 SF Carbon Indoor |
 |
| 9,492.74EUR |
