| 1 x | Ply-Span 450x600/13g Blue |
| 1 x | Ply-Span 450x600/13g Orange |
| 1 x | Oracover Red 2 m |
| 1 x | Oracover Orange 2 m |
| 2 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
| 1 x | Oracover Verde 2 m |
| 1 x | Ply-Span 450x600/13g White |
| 1 x | Oracover White 10 m |
| 1 x | Oracover CARBON Metalic 1 m |
| 1 x | Oracover White 2 m |
| 1 x | Ply-Span 450x600/13g Black |
| 1 x | ORACOVER Ferrari red (2 m) |
| 1 x | Monokote BLUE metalizado (1.8x0.65m) |
| 1 x | Oracover Azul 2 m |
| 1 x | Monokote BLANCO jet (1.8x0.65m) |
| 1 x | Oratex Natural White 2m |
| 1 x | Oracover Black 2 m |
| 1 x | Monokote PLATINO metalizado (1.8x0.65m) |
| 1 x | Ply-Span 450x600/13g Red |
| 1 x | ORACOVER Fluor red (2 m) |
| 1 x | ORACOVER transparent Yellow (10 m) |
| 1 x | Oracover Yellow CUB 2 m |
| 1 x | Oracover Yellow CADMIO 2 m |
| 1 x | Ferrita 27x14x7 mm |
| 2 x | Ferrita con funda |
| 2 x | BALSA trip 8.0x8.0x1000 mm |
| 2 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 3 x | Beech dowels 10 mm x 1000 mm |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 2 x | BALSA trip 3.0x5.0x1000 mm |
| 2 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 2 x | Pine wood slat 10x10x1000 mm |
| 3 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 2 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 2 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | BALSA trip 10x10x1000 mm |
| 2 x | BALSA triangular 10x10x1000 mm |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 3 x | OBECHI sheet 2.0x3.0x1000 mm |
| 2 x | Liston HAYA 3 x 10 x 1000 mm |
| 2 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Universal Colour Paste deep black 250 g |
| 1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
| 1 x | XH male balance (3S) connector (2 pcs) |
| 1 x | Profile ABS Square 2 x 1000 mm |
| 1 x | Smoke set "M" |
| 1 x | LOWER TOW HOOK |
| 1 x | PVC yellow transparent battery termo-retract 69 mm (10 m) |
| 1 x | Receiver Crystal 35 Mc/s Ch 62 |
| 1 x | Crystal TX 35.100 Ch 70 |
| 1 x | Battery RX JETI LiIon RB 3100 7.2v |
| 1 x | EasyFLY Addon |
| 1 x | Crystal Universal RX 35.170 Ch 77 |
| 1 x | Ferrita 17x10x6.5 mm |
| 2 x | Liston HAYA 8 x 8 x 1000 mm |
| 3 x | Balsa panel 1.0x100x1000 mm |
| 1 x | A/C quality beech plywood 600x300x0.6 mm |
| 2 x | Walnut wood slat 1.5x1.5x1000 mm |
| 2 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | Xplorer2 anemometro |
| 1 x | Connectors banna oro 0,8 mm (M/F) |
| 1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
| 1 x | Conector MT-60 (pair) |
| 1 x | Conector JAPAN G2 Set 5 pares |
| 2 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | A/C quality beech plywood 1520x750x3.0 mm |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | A/C economy plywood 600x300x6+.0 mm |
| 1 x | Balsa panel 5.0x100x1000 mm |
| 2 x | BALSA triangular 8x8x1000 mm |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Xplorer1 anemometro |
| 1 x | GPS Expander Module |
| 1 x | Ball link V1 Ø7 M4/3 (6 uds) |
| 1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
| 2 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
| 1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Ball Link ALU M3 - RH (1 pcs) |
| 1 x | Angled clevis with threaded rod M3 |
| 1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
| 1 x | Z type of cable coupler Ø 1 (2 uds) |
| 2 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
| 1 x | Z type of cable coupler Ø 2 (2 uds) |
| 2 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
| 1 x | Ball link Aluminio M3 (2 pcs) |
| 1 x | Connectors banna oro 3 mm (M/F) |
| 1 x | Conector XT-150 6mm (Set: 5 pares) |
| 1 x | 6,4x1000 mm 2:1 blue termoretract tube |
| 1 x | PVC transparent battery termo-retract 85 mm (1 m) |
| 1 x | PVC termo-retract battery 45 mm transparent orange (1 m) |
| 1 x | Conector JR/Uni Servo male BLUE silicon (10 pcs) |
| 1 x | Bag connector 2 mm |
| 1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
| 1 x | Futaba 46 mm servo arm with ball link |
| 1 x | Futaba 17 mm servo arm with ball link HITEC |
| 1 x | HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program |
| 1 x | Futaba 20 mm servo arm |
| 2 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
| 2 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
| 1 x | USB Mini Camera endoscope |
| 1 x | 800TVL CMOS camera for FPV |
| 1 x | Conector JR Servo female (50 pcs) |
| 1 x | 2 mm male connector (2 pcs) with safety connector |
| 1 x | 30 cm MULTIPLEX female connector |
| 1 x | Conector JR/Uni Servo female BLUE silicon (10 pcs) |
| 1 x | 2 mm female connector (2 pcs) with safety connector |
| 2 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | A/C quality beech plywood 600x300x1.5 mm |
| 1 x | Birch plywood plate 600x300x1.2 mm |
| 2 x | Balsa panel 3.0x100x1000 mm |
| 1 x | 120x60 mm SLH KOVO wheel |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | A/C quality beech plywood 1520x750x4.0 mm |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 2 x | Balsa panel 4.0x100x1000 mm |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | quality beech plywood BIRCH 600x300x2.0 mm |
| 2 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | Mig-29 "FULCRUM" (RBC Kits) |
| 1 x | Adapter 3,0 mm M6 |
| 1 x | Adapter 3,2 mm M6 |
| 1 x | 2,4x1000 mm 2:1 black termoretract tube |
| 1 x | Motor Advance 30-10 F3A |
| 2 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 1 x | Motor ORBIT 20-12 with coolingfan |
| 1 x | Motor HP 220/30/A3 P4 5:1 |
| 2 x | Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR) |
| 1 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
| 1 x | QUANTUM II 55 Brushless Motor |
| 1 x | Skyray (RBC Kits) |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
| 1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
| 1 x | Adapter 5,0 mm M6 for spinner 40 mm fixed propeller |
| 1 x | Motor OS MAX 160 AX |
| 1 x | Motor OS FS 95 V 4T |
| 1 x | Ferrita 14x8x5.5 mm |
| 1 x | XH female balance (7S) connector (2 pcs) |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | Balsa panel 1.5x100x1000 mm |
| 1 x | Y Cable |
| 1 x | Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs) |
| 1 x | Black large kwik link (10 pcs) |
| 1 x | Porta Kwik link M4 3 mm (2 pcs) |
| 1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
| 1 x | Cable coupler M2,5 (2 pcs) |
| 1 x | Kwik link aluminio M3 L:30mm (6 uds) pinØ1.6mm Left |
| 1 x | Porta Kwik link M4 4 mm (2 pcs) |
| 1 x | Pulley brass 14/2 (2 pcs) |
| 1 x | Turnbuckle M2,5x27/43 (2pcs) |
| 1 x | Wing conexion 2 servos JR/Graupner 50 cm |
| 1 x | XH female balance (2S) connector (2 pcs) |
| 1 x | Red 4 mm connector holder |
| 1 x | Soporte carbono MR30 (2 pcs) |
| 1 x | XH LiPo extension lead |
| 1 x | XH female balance (5S) connector (2 pcs) |
| 1 x | XH female balance (8S) connector (2 pcs) |
| 1 x | Servo HITEC HS-56 BB |
| 1 x | Servo lock HS-80/81/82/85 (2 pcs) |
| 1 x | DPSI magnetic switch actuator (housing) |
| 1 x | Connectors banna oro 4 mm (M/F) |
| 1 x | DPSI Micro-DualBat 5.9V / 7.2V MPX-JR |
| 1 x | Hose clamps 0.16-0.20in, (4 pieces) |
| 1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
| 1 x | Pine wood slat 3.0x5.0x1000 mm |
| 1 x | Motor OS 37 SZ-H |
| 1 x | Motor OS MAX 120 AX |
| 1 x | Motor OS 3820-1200 electric |
| 2 x | XH male balance (9S) connector (2 pcs) |
| 2 x | XH male balance (4S) connector (2 pcs) |
| 2 x | Pulley brass 12/2 (2 pcs) |
| 1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
| 1 x | Cable coupler M2x66 (2 uds) |
| 1 x | Turnbuckle M1,6x17/27 (2pcs) |
| 2 x | Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs) |
| 1 x | wire tensioner (blue) |
| 1 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
| 1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
| 1 x | Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs) |
| 1 x | 4 mm M3 red control terminal (4 pcs) |
| 1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Pulley brass 2,5/1 (2 pcs) |
| 1 x | Turnbuckle M2,5x32/48 (2pcs) |
| 1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Wire easy tensioner (red) |
| 1 x | Kwik link with arm M3xM2xL24 |
| 1 x | Kwik link with arm M5xM2,5xL30 |
| 1 x | Stainless steel 4 m Pull-Pull complet set (max 20 kg) |
| 1 x | Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm |
| 1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
| 1 x | 12.7 mm 2:1 black termoretract tube |
| 1 x | XH male balance (2S) connector (2 pcs) |
| 1 x | XT-60 connector (male) |
| 1 x | Servo Connector Brackets (10 pcs) |
| 1 x | XH male balance (5S) connector (2 pcs) |
| 1 x | Wing connector 8pin with pin strip, plug & socket |
| 1 x | XT60 Connector with Holder Male 2pcs |
| 1 x | XH female balance (4S) connector (2 pcs) |
| 1 x | Gear set HITEC HS-225 |
| 1 x | Servo HITEC HS-325 BB |
| 1 x | Servo HITEC HS-85 BB |
| 1 x | Gear set HITEC HS-56 HB |
| 1 x | Servo HITEC HS-225 BB |
| 1 x | Gear set HITEC HS-311/322/325BB |
| 1 x | Screws set for Hitec MG arms servo |
| 1 x | Gear set HITEC HS-65 HB |
| 1 x | Gear carbonite set HITEC HS-6965 |
| 1 x | Servo HITEC HS-485 HB |
| 1 x | Servo HITEC HS-55 |
| 1 x | Servo HITEC HS-77 BB Low Profile |
| 1 x | Servo HITEC HS-45 HB, servo box |
| 1 x | EWC3 100 cm wing connector |
| 1 x | Filter Capacitor JR |
| 1 x | Fueling valve "Air" |
| 1 x | DPS Switch JR/JR |
| 1 x | DPSI Ampere & Voltage bundle |
| 1 x | Emcotec SPS Magnetic Switch Actuator |
| 1 x | DPSI Ampere battery backer |
| 1 x | DPSI RV Mini 6 (2008) |
| 1 x | Combo lighting module with covering drop shape |
| 1 x | DPSI OCP Overload protection |
| 1 x | DPSI RV Mini 5 (2008) |
| 1 x | DPSI magnetic switch actuator (PCB) |
| 1 x | OS 37 SZ-H, Connecting rod |
| 1 x | DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch |
| 1 x | Battery EMCOTEC LiIon 3000 7.2v |
| 1 x | DPSI Micro - RCS RV |
| 1 x | Fuel Dot (RED) |
| 1 x | EWC3 40 cm wing connector |
| 1 x | Cover cap drop-shaped paintable 43 mm |
| 1 x | Heat-conducting adhesive (2x2ml), WLK DK 4 |
| 1 x | DPSI Micro SingleBat 5.9V/7.2V magnetic switch |
| 1 x | DPSI 2001 RV |
| 1 x | Heat sink for Optotronix LEDs |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | Black 2,4 GHz antenna exit guides (2 pcs) |
| 1 x | Fuel Dot (Silver) |
| 1 x | EWC6 40 cm wing connector |
| 1 x | DPSI Micro MPS |
| 1 x | Combo lighting module with covering drop shape |
| 1 x | DPSI RV Mini 6 Magic with Gas-Cap switch |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | Turnbuckle M2x29/43 (2pcs) |
| 1 x | Small kwik link (10 pcs) |
| 1 x | Pulley brass 2,5/1 (2 pcs) |
| 1 x | 1,2x1000 mm 2:1 red termoretract tube |
| 1 x | Motor Mega AC 16/25/03 |
| 1 x | POWER PEAK D7 EQ-BID 12V/230V-Duo Charger |
| 1 x | Motor Mega AC 22/30/02 |
| 1 x | Motor Mega AC 16/15/05 CE F5J |
| 1 x | Motor Mega AC 16/07/08 |
 |
| 8,974.97EUR |
