| 1 x | Stickers-digit for marking |
| 2 x | Locking cable tie 4.6x203 (uds) |
| 1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 2 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 2 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
| 1 x | Big Crow DLE-170M |
| 1 x | SUS wire 3m (nylon coated) |
| 1 x | Covered closure or fairings |
| 1 x | Cierre cabina aluminio Ø4, I=10 mm |
| 2 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 2 x | Motor DLE 200cc Std |
| 1 x | Small Crow DLE-170M |
| 1 x | Cockpit plastic closing |
| 2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 2 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 2 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | Motor DLE 200cc Premium Muffler |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 2 x | Ferrita con funda |
| 1 x | White silicone 0,25 qmm wire (150 m) |
| 1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
| 2 x | Circlik for shaft 1.9 mm (10 pcs) |
| 1 x | Indoor hinge with servo arm integraded |
| 1 x | 1/4 Pilot "Heidi" |
| 1 x | Profile ABS half cane 2.0x1000 mm |
| 1 x | ABS rectangular profile 10x5.0x1000 mm |
| 1 x | Oracover Azul Cielo 2 m |
| 1 x | Towing hook |
| 1 x | Xplorer2 anemometro |
| 1 x | PH6 adapter for 6mm M10 AXI for AXI41xx |
| 2 x | Snap short M2 (10 uds) |
| 1 x | Screw-lock connector M2 (2 uds) |
| 1 x | Clip mini fixing for wing (2 pcs) |
| 1 x | Motor DLE 170 M- Paramotors |
| 1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
| 1 x | Allen wheel collar M3x5 |
| 1 x | 90 mm rods + T patellas set for direction control |
| 1 x | Cable grommet 9.5 mm (4 uds) |
| 2 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
| 1 x | One touch canopy lock |
| 2 x | Motor DLE 430 cc - Paramotors |
| 1 x | Canopy Latch |
| 1 x | Aluminium cap bolt washer M3 black (8 pcs) |
| 2 x | T-Motor U7-V2.0 Kv420 |
| 1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
| 1 x | 20-25mm Servo Arm |
| 1 x | Aluminium wide washer M4 Blue (4 pcs) |
| 1 x | Flat washer 2.7 mm (20 uds)pcs) |
| 1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
| 1 x | Spring lock washer 3.1 mm (20 pcs) |
| 1 x | Aluminium wide washer M4 Black (4 pcs) |
| 1 x | Flat washer 4.3 mm (20 pcs) |
| 1 x | Circlik for shaft 1.2 mm (10 pcs) |
| 1 x | Aluminium cap bolt washer M4 green (8 pcs) |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | BALSA triangular 6x6x1000 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | Motor ORBIT 20-12 with coolingfan |
| 1 x | 4 mm Prop Adapter M8 |
| 1 x | 5 mm Prop Adapter M8 |
| 1 x | Prop Shaft Adapter 4 mm/M8 "long" 35 mm |
| 1 x | 6 mm Prop Adapter M8 |
| 1 x | 5 mm Prop Adapter M8 |
| 1 x | Wing bolts M3 Steel screw blue (2 pcs) |
| 1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
| 1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
| 1 x | Ferrita 17x10x6.5 mm |
| 1 x | Battery charging cable XT60 |
| 1 x | Motor OS 81 FS 4T |
| 1 x | OS 37 SZ-H, Carburetor Wharf OS 40, 60, FS70, 91S and 120SE |
| 1 x | LASER 260 60" V2 ARF Yellow (SkyWing) |
| 1 x | Wing bolts M3 Steel screw Red (2 pcs) |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | OS 40-FG 4T Motor |
| 1 x | Landing gear frontal support 29x26x13,5 |
| 1 x | Landing gear frontal support 25x32x16 |
| 1 x | Cable tie mounts 4.3 (4 uds) |
| 1 x | Tip wing protector 40x14 (2 pcs) |
| 1 x | Motor OS 55 AX |
| 1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
| 1 x | Tip wing protector 30x10 (2 pcs) |
| 2 x | Wing bolts M6 Steel screw Red (2 pcs) |
| 2 x | Wheel collar 3.5 mm Ø (4 uds) |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Carburador OS (Type 40K) 46AXII |
| 1 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 1 x | Motor OS 46 AX II |
| 1 x | Wheel collar 5 mm Ø (4 uds) |
| 1 x | Tip wing protector 28x10x12 (2 pcs) |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 1 x | Motor OS FS 95 AX |
| 1 x | Triple rod con. 2mm Pushrod (2 pcs) |
| 1 x | Bujia OS G5 gasolina |
| 1 x | OS Engine 105HZ-R Heli |
| 1 x | OS 37 SZ-H, Crankshaft |
| 1 x | Motor OS MAX 120 AX |
| 2 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
| 1 x | Motor OS 3820-1200 electric |
| 1 x | Wheel collar 6 mm Ø (4 uds) |
| 2 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
| 1 x | OS Engine 105HZ-R Heli with pipe 105 |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | Pushrod greyline 4/3 with coupler M3 |
| 1 x | Allen wheel collar M3x3 |
| 1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
| 1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
| 1 x | 28x5 mm wires output (2 pcs) |
| 1 x | Wheel collar 2 mm Ø (4 uds) |
| 1 x | 38x4,5 mm wires output (2 pcs) |
| 1 x | Allen wheel collar M4x4 |
| 1 x | 2.3 mm Adapter for 30 mm spinners |
| 1 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
| 1 x | 3,2 mm Prop Adapter M6 |
| 1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs) |
| 1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
| 1 x | Blue Aluminium lock nut M3 (4 pcs) |
| 1 x | Servo M2x5/16 screw (4 pcs) |
| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Socket Head Screw M2x10 |
| 1 x | Tapping Screw M2.2x65 (10 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
| 1 x | Socket Head Screw M2,5x12 |
| 1 x | Screw M2.5x8 (10 pcs) |
| 1 x | Screw M3x20 (10 pcs) |
| 1 x | Screw M3x16 (10 pcs) |
| 1 x | 10 mm floating pad (72 pcs) |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
| 1 x | Balsa panel 1.5x100x1000 mm |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | Balsa panel 6.0x100x1000 mm |
| 1 x | Actuador lineal HLS12-100210-7.4v |
| 1 x | DUPLEX 2.4EX MAlti (Rev.2) |
| 1 x | DUPLEX 2,4EX Brackets for Transmitter DC/DS |
| 1 x | DUPLEX 2.4EX RC Power Switch 10 |
| 1 x | Battery RX JETI LiIon RB 3100 7.2v |
| 1 x | DUPLEX 2.4EX MU 3 Sensor |
| 1 x | DUPLEX 2.4EX Satellite receiver Rsat 2 |
| 1 x | DUPLEX 2.4EX MUI 150 Sensor |
| 1 x | Duplex 2.4 EX TopFuel MTAG Battery Reader |
| 1 x | Screw M3x5 (10 pcs) |
| 1 x | Pan Head Screw M1,6x6 (10 pcs) |
| 1 x | Socket Head Screw M2x12 |
| 1 x | Tapping Screw M2.2x9.5 (10 pcs) |
| 1 x | Spring pin Ø 2 x 6 mm (10 pcs) |
| 1 x | Screw M3x30 (10 pcs) |
| 1 x | Screw M3x8(10 pcs) |
| 1 x | Balsa panel 10x100x1000 mm |
| 1 x | Lite Plywood panel 600x300x2.0 mm |
| 1 x | Birch plywood plate 600x300x1.2 mm |
| 1 x | Balsa panel 1.0x100x1000 mm |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | Balsa panel 3.0x100x1000 mm |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
| 1 x | A/C quality beech plywood 600x300x1.5 mm |
| 1 x | quality beech plywood BIRCH 600x300x2.0 mm |
| 1 x | A/C quality beech plywood 1520x750x4.0 mm |
| 1 x | A/C quality beech plywood 600x300x0.6 mm |
| 1 x | Balsa panel 2.5x100x1000 mm |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | A/C economy plywood 600x300x6+.0 mm |
| 1 x | Birch plywood plate 600x300x2.5 mm |
| 1 x | Balsa panel 2.0x100x1000 mm |
| 1 x | Lite Plywood panel 600x300x3.0 mm |
| 1 x | A/C quality beech plywood 600x300x8.0 mm |
| 1 x | Balsa panel 8.0x100x1000 mm |
| 1 x | Birch plywood plate 600x300x1.5 mm |
| 1 x | Birch plywood plate 600x300x2.0 mm |
 |
| 27,172.40EUR |
