| 1 x | ABS tube 5.0x4.0x156 mm |
| 1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
| 1 x | ABS tube 5.0x4.0x1000 mm |
| 1 x | ABS tube 4.0x3.0x1000 mm |
| 1 x | ABS tube 5.0x3.0x1000 mm |
| 2 x | ABS tube 3.0x2.0x1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
| 1 x | ABS tube 10.0x8.0x1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
| 1 x | ABS tube 6.0x5.0x1000 mm |
| 1 x | ABS tube 6.0x4.0x1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | ABS tube 9.0x8.0x1000 mm |
| 2 x | ABS tube 9.0x7.0x1000 mm |
| 1 x | ABS tube 3.0x2.0x330 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
| 1 x | ABS tube 4.0x2.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | ABS tube 16.0x14.0x1000 mm |
| 2 x | ABS tube 3.0x1.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
| 1 x | ABS tube 2.0x1.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
| 1 x | ABS tube 7.0x5.0x1000 mm |
| 1 x | ABS tube 12.0x10.0x1000 mm |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 2 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 1 x | SUS wire 3m (nylon coated) |
| 1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 2 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 2 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Canopy Latch |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Cierre cabina aluminio Ø4, I=10 mm |
| 1 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 2 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 2 x | One touch canopy lock |
| 2 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 2 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 2 x | Screw-lock connector M2 (2 uds) |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | Straightened rod Ø 2.5 mm x 1000 mm |
| 1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Straightened rod Ø 5.0 mm x 1000 mm |
| 1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm) |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
| 1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm) |
| 1 x | Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm) |
| 1 x | Straightened rod Ø 0.8 mm x 1000 mm |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 2 x | Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
| 1 x | Fiberglass tube 6/4x1000mm |
| 1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
| 2 x | Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm) |
| 1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
| 1 x | Straightened rod Ø 4.5 mm x 1000 mm |
| 1 x | Straightened rod Ø 1.0 mm x 1000 mm |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
| 1 x | Straightened rod Ø 5.5 mm x 1000 mm |
| 1 x | Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
| 1 x | Straightened threaded rod M2-1m |
| 1 x | Straightened rod Ø 3.0 mm x 1000 mm |
| 1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm) |
| 1 x | Ferrita 14x8x5.5 mm |
| 1 x | Strip ABS 2.0x5.0x1000 mm |
| 1 x | Round Rod 1,5x1000 mm |
| 1 x | Round Rod 2,0x1000 mm |
| 1 x | Round Rod 1,0x1000 mm |
| 1 x | Strip 1,5x1,5x330 mm |
| 1 x | ABS Strip 1.5x3.0x1000 mm |
| 1 x | Round Rod 1,25x1000 mm |
| 1 x | Strip 2,5x1,25x330 mm |
| 1 x | M2,5 5Diam short black ball link V2 (2 pcs) |
| 1 x | Socket head long ball link M3 (6 uds) |
| 1 x | Socket head ball link M3 (2 uds) |
| 1 x | M3 Maxi ball link (2 uds) |
| 1 x | Ball link M3 (10 pcs, flat ball) |
| 1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
| 1 x | Blue metalic ball link M3/3 azul (2 pcs) |
| 2 x | M3 Maxi ball link (2 uds) |
| 1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
| 1 x | Ball link M3 (6 uds) |
| 1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
| 1 x | Short ball link M3 (6 uds) |
| 1 x | M2 5Diam short black ball link V2 (2 pcs) |
| 1 x | M3 Maxi ball link (2 uds) |
| 1 x | 6 mm hexagonal ball link M3 (10 pcs) |
| 1 x | Ball link M3 RPA's-UAV's |
| 1 x | Socket head long ball link M3 (2 uds) |
| 1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
| 1 x | Joint with bearing M2 22x5,5 |
| 2 x | Blue metalic ball link M2/2 azul (2 pcs) |
| 1 x | Short ball link M1.6 (6 uds) |
| 2 x | Socket head ball link M3 (2 uds) |
| 1 x | Long ball link M3 (6 uds) |
| 1 x | M2,5 5Diam black ball link V2 (2 pcs) |
| 1 x | Ball link M2,5 (10 pcs) |
| 1 x | Joint with bearing M3 22x5,5 |
| 2 x | Joint with bearing M2,5 22x5,5 |
| 1 x | M3 INDUSTRIAL ball link (2 uds) |
| 1 x | Long ball link M1.6 (6 uds) |
| 1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
| 1 x | Long ball link M2 (6 uds) |
| 1 x | Ball link M1.6 (6 uds) |
| 1 x | Conector BEC female (10 pcs) |
| 1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
| 1 x | ABS tube 8.0x7.0x1000 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 1 x | Oracover White 10 m |
| 1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
| 2 x | Wheel collar 3.5 mm Ø (4 uds) |
| 3 x | Pushrod octagone 4/3 |
| 1 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
| 1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
| 1 x | Cable grommet Ø 6.4 mm (4 uds) |
| 1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
| 2 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible |
| 2 x | Battery RX JETI LiIon RB 3100 7.2v |
| 1 x | Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm) |
| 1 x | |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
| 1 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
| 1 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
| 1 x | Electric Fuel pump |
| 1 x | PowerFuel RX V2 Fuel Pump |
| 1 x | Secraft Fuel system v2, red color |
| 1 x | LASER 73" 1.85m (05) PILOT |
| 1 x | Teacher-student connector T12FG/FX-30 |
| 1 x | Charger FUTABA SQN30W12P-08 220v |
| 1 x | Thixotropic agent TM 100, tin/ 415 g (approx. 5 l) |
| 1 x | GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l) |
| 1 x | Spray adhesive AEROFIX 2 |
| 1 x | |
| 1 x | Lock washer 2.2 mm (20 pcs) |
| 1 x | Circlik for shaft 1.5 mm (10 pcs) |
| 1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
| 1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | Ball link M3 (10 pcs) |
| 1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
| 1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 1 x | Split pin 1x8 mm (10 uds) |
| 1 x | Allen wheel collar M4x4 |
| 1 x | A40-10S V2 8-Pole + 6,7:1 PG |
| 1 x | Aluminium Hub "Z" for folding Props 38 mm M8 Shaft 8 mm |
| 1 x | Transmitter Balancer Futaba V |
| 1 x | Maleta transporte FUTABA 10PX |
| 1 x | Receiver bed (Blue) |
| 2 x | Landing gear frontal support 25x32x16 |
| 1 x | Pushrod greyline 4/3 with coupler M3 |
| 1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
| 1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
| 1 x | Pushrod octagone 3/2 with coupler M2 |
| 1 x | Pushrod greyline 3/2 with coupler M2 |
| 1 x | Snap pin for micro clevis (10 uds) |
| 1 x | Split pin 1.6x16 mm (10 uds) |
| 1 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
| 1 x | Fully Threaded Steel Rod M3 |
| 1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
| 1 x | Snap long M2 (10 uds) |
| 1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
| 2 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
| 1 x | Landing gear frontal support 29x26x13,5 |
| 1 x | Snap short M2 (10 uds) |
| 2 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
| 2 x | Pushrod octagone 3/2 |
| 1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
| 1 x | Snap for floding prop for 2 mm axi |
| 2 x | Lead with adhesive (2 pcs) |
| 2 x | Pushrod octagone 4/3 with coupler M3 |
| 1 x | Battery LiFe TopFuel 3100 mAh 2s MTAG 30C |
| 1 x | Ball Bearings for motor A60-V2 |
| 1 x | Thixotropic agent tin/ 15 g (approx. 350ml) |
| 2 x | 41x5,5 mm wires output (2 pcs) |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm |
| 1 x | Esc MasterBasic 55SB |
| 1 x | DUPLEX 2.4EX MUI 75 |
| 1 x | DUPLEX 2.4EX Satellite receiver Rsat 2 |
| 1 x | DUPLEX 2.4EX MFlow2 Gas 800 |
| 1 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
| 1 x | Split M1,2x10 (10 pcs) |
| 1 x | A40 Backmountset complete |
| 1 x | Telemetria XYCOY adapter |
| 1 x | Turbina X132 H "Compact Version" |
| 1 x | Cable grommet 9.5 mm (4 uds) |
| 1 x | DUPLEX 2.4GHz GPS |
| 1 x | DUPLEX 2.4EX MUI 150 Sensor |
| 1 x | DUPLEX 2.4EX MULi 6s M |
| 1 x | Battery RX JETI LiIon RB 5200 7.2v |
| 1 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
| 1 x | DSM 10 Dual Switch Mixer |
| 1 x | Duplex 2.4EX tray transmitter DC-16 II Black multimode |
| 1 x | DUPLEX 2,4EX Stick with 2-Position Switch for Transmitter DC/DS |
| 1 x | Servo M2x9/16 screw (4 pcs) |
| 1 x | Panasonic Eneloop AA 1,2 V battery 19>00 mAh |
| 1 x | Landing gear axle Ø 6 mm (2 uds) |
| 1 x | 200 Newtons FEMA absorber |
| 1 x | Wheel FEMA 127 mm / 6 mm |
| 1 x | Compact on-board starting system (9713) |
| 1 x | Wheel FEMA 165 mm / 8 mm |
| 1 x | GPS V2 Sensor for M-LINK receivers |
| 1 x | Fiberglass motor-holder for electric motors |
| 1 x | BU 131 Jugmann Panel Instrum. trasero |
| 1 x | Oratex Red Fokker 10 m |
| 1 x | Quadcopter Q50 Kit Carbon Fiber |
| 1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
| 2 x | Blade holder metal LAMA |
| 1 x | LiIon Battery 3000 mAh 3.3v 15A (2 pcs) |
| 1 x | Flybar support metal LAMA |
| 1 x | Scale exhaust K45TP |
| 1 x | Canopy Sweet / Siesta |
| 1 x | 13 mm wing servo holder |
| 1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
| 1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
| 1 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
| 1 x | 300 Newtons FEMA absorber |
| 1 x | Servo holder for retract |
| 1 x | Mudguard wheels 112/127 mm |
| 1 x | Wheel FEMA 152 mm / 8 mm |
| 1 x | Interruptor On/Off Corto micro |
| 1 x | LENTUS Multiplex Propeller 8x6 |
| 1 x | VIPER JET G2 Esq. 5 Green/White/Blue |
| 1 x | Boomerang SPRINT V2 Red/White/Blue |
| 1 x | 15 mm reinforced hinge |
| 1 x | 18 mm reinforced hinge |
| 1 x | LO 100 ARC 3.3m,cabina |
| 1 x | 25 mm reinforced hinge |
| 1 x | PARTENAVIA 2020 mm ARC with Flaps |
| 1 x | BU 131 Jugmann Panel Instrum. frontal |
| 1 x | Fiberglass motor-holder for electric motors |
| 1 x | PARTENAVIA 2020 mm ARF with Flaps |
| 1 x | Vasa model Catapult |
| 2 x | Aluminun wheel collar 3 mm Ø (4 uds) |
| 1 x | Lipo GENS 2300 6.6v 2s1p Li-Fe Pack emisora |
| 1 x | TURBINATOR 2 BLUE AND YELLOW 1778 mm Combo |
| 1 x | Cockpit aluminium closing |
| 1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
| 1 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
| 1 x | 100 mm rods + T patellas set for direction control |
| 1 x | 45 mm rods set for direction control |
| 1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
| 1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
| 1 x | 140 mm rods set for direction control |
| 1 x | Allen wheel collar M4x6 |
| 1 x | Wheel collar 4 mm Ø (4 uds) |
| 1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
| 1 x | Tip wing protector 40x14 (2 pcs) |
| 1 x | Tip wing protector 30x10 (2 pcs) |
| 1 x | Wheel collar 6 mm Ø (4 uds) |
 |
| 17,056.49EUR |
