| 2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 2 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | SERVO HOLDER |
| 2 x | Gates hinge 30x16 mm (2 pcs) |
| 2 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 1 x | 25 mm reinforced hinge |
| 1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
| 1 x | Small pinned hinge (12 uds) |
| 2 x | Flap hinge 33x9 mm (6 pcs) |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 1 x | 18 mm reinforced hinge |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | Fast'n EZ-CA-Hinge (12 uds) |
| 2 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | Nylon hinge 15x0,3 (10 pcs) |
| 2 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
| 2 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 3 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 2 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Flap hinge (6 pcs) |
| 1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Adjustable launching hook |
| 2 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
| 1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 2 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 2 x | Towing hook |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 2 x | 15 mm reinforced hinge |
| 2 x | Miniature brass strap hinge, 1 m |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
| 1 x | Gates hinge aluminium (1 pcs) |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 1 x | Pin type hinge Al 6x98 mm (2 pcs) |
| 2 x | Gates hinge black 30x16 mm (2 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
| 1 x | Z type of cable coupler Ø 2 (2 uds) |
| 2 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
| 2 x | Angled clevis with threaded rod M3 |
| 1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 2 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
| 1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
| 2 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
| 2 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
| 1 x | Ball link duraluminium M3 V1 (10 pcs) |
| 2 x | Threaded coupler M2 (10 uds) |
| 1 x | Ball Link ALU M3 - RH (1 pcs) |
| 2 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
| 1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
| 1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
| 1 x | Brass ball links BS M3 V1 (10 pcs) |
| 1 x | Kwik link AL M3 con Clip (2 pcs) |
| 1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
| 1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | ABS Strip 1.5x3.0x1000 mm |
| 1 x | Motor DLE 200cc Std |
| 1 x | Straightened rod Ø 2.0 mm x 1000 mm |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | Servo NARO Max Std |
| 1 x | Carbon fiber flat 1000x3.0x0.5 mm |
| 1 x | Carbon fiber rod 10 mm x 1000 mm |
| 1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
| 1 x | U Profile ABS 1,0x2,0x1000 mm |
| 1 x | 3l Smoke oil |
| 1 x | Yellow smoke bombs AX-60 (5 pcs) |
| 1 x | 4,8x1000 mm 2:1 blue termoretract tube |
| 1 x | Towing hook <3m |
| 1 x | Fiberglass plate 620x540x2,0 mm |
| 1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 50m |
| 2 x | Fiberglass plate 350x150x2.5 mm |
| 1 x | Teflon rollers 40 mm x 15 mm Diam. |
| 3 x | Pin hinge 39x20 mm (10 uds) |
| 1 x | Keypad ALTIS V4 |
| 1 x | Pin hinge 26x11 mm (10 uds) |
| 2 x | Large flex hinge (12 uds) |
| 1 x | Suncover 100cc Red |
| 1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
| 2 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 1 x | ABS 500 x 400 x 1,5 mm (white) |
| 1 x | Telemetry interface ALTIS 12 cm |
| 1 x | Pulley brass 4/1,5 (2 pcs) |
| 1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
| 1 x | Set clevis for pull-pull (TY13233 & TY13234) |
| 2 x | Stainless steel 3 m Pull-Pull complet set (max 20 kg) |
| 1 x | Pulley brass 8/2 (2 pcs) |
| 1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
| 1 x | Z type of cable coupler Ø 1.8 (2 uds) |
| 1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
| 1 x | Small kwik link (10 pcs) |
| 1 x | Threaded coupler M3 (10 uds) |
| 1 x | Fixed launching hook |
| 1 x | Turnbuckle M2,5x32/48 (2pcs) |
| 1 x | Z type of cable coupler Ø 1 (2 uds) |
| 1 x | Threaded coupler M2,5 (10 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
| 1 x | Wheel 28 mm |
| 1 x | Foam wheel Ø 351 mm (2 pcs) |
| 1 x | Wheel FEMA 152 mm / 8 mm |
| 1 x | Nose wheel 62 mm |
| 1 x | Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg |
| 1 x | Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs |
| 1 x | Hardener Aero EPH 161 (250 g) |
| 1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
| 1 x | 3 mm Prop Adapter M6 |
| 1 x | Chili Race F3K 2 wing servo mounted(carbon biax) |
| 2 x | 3.17 mm Prop Adapter CN-Spinner |
| 1 x | Prop Shaft Adapter 8 mm/M12 "long" |
| 1 x | 4" - 102 x 45 mm Ø5 mm aluminium core wheel |
| 2 x | Wheel FEMA 112 mm / 6 mm |
| 2 x | Super Light Wheels(Sponge Tyre) Ø 50mm x 19mm (2pcs) axis Ø 3.5m |
| 1 x | 2.5 inch aluminium core wheel (1 pcs) |
| 2 x | Wheel 38 mm V2 |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Indoor hinge with servo arm integraded |
| 1 x | Carbon plate 350x150x0.5 mm |
| 1 x | Long pinned hinge (12 uds) |
| 1 x | Micro flex hinge (12 uds) |
| 1 x | Round flex hinge (12 uds) |
| 1 x | Small pinned hinge (6 uds) |
| 1 x | Pin hinge 34x16 mm (10 uds) |
| 1 x | Small flex hinge (12 uds) |
| 1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
| 1 x | 3.2 mm Prop Adapter M6 |
| 1 x | PT 22x10 EL Propeller |
| 1 x | PT 21x13 EL Propeller 3 Blade |
| 1 x | PT 16x10 E Propeller |
| 1 x | Wheel FEMA 165 mm / 8 mm |
| 1 x | Wheel 115 mm with electromagnet and brake disk (2 uds) |
| 1 x | Super Light Wheels (Sponge Tyre) Ø 60mm x 19 mm (2pcs) axis Ø 3. |
| 1 x | Superlight wheel 100 mm with valve (2 pcs) |
| 2 x | Wheel FEMA 127 mm / 6 mm |
| 1 x | Wheel Scale 1/4 Vintage 178 mm / 7" (1 par) |
| 2 x | Wings Bags JEEMO |
| 2 x | JEEMO Kit ARF Basic (2 color) - XTRALIGHT |
| 2 x | XICOY X45 rail |
| 1 x | Jeemo Dolly |
| 1 x | FX three-position switched channel, long |
| 1 x | Mini DART 2 F3K carbon light 1m Green |
| 1 x | Turnbuckle M2x22/35 (2pcs) |
| 1 x | PITTS CHALLENGER 87″ 2.20m (120cc) 02 ARF |
| 1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
| 1 x | Ball link V1 Ø7 M4/3 (6 uds) |
| 1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm |
| 1 x | EXTRA 330L 35% hardware pack (Precision Aerobatics) |
| 1 x | ULTRA STICK 30 cc ARF |
| 1 x | Propeller MEJZLIK 9,5x3 SF Carbon Indoor |
| 1 x | Turnbuckle M1,6x20/30 (2pcs) |
| 1 x | Carbon plate 350x150x4.0 mm |
| 1 x | Carbon plate 500x400x2.0 mm ISOTECH |
| 1 x | Support Pitot JETI |
| 1 x | Soporte filtro FESTO (4 pcs) |
| 1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
| 1 x | Wheel 75 mm with electromagnet and brake disk (2 uds) |
| 1 x | Wheel Ø 90 mm (1 ud) Electron Retracts |
| 1 x | Set stickers JEEMO "Andy" |
| 1 x | JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT |
| 1 x | Legs + electric brakes for Viper Jet 1700 mm |
| 1 x | 120 mm leg for retract undercarriage with rotation sistem (1 pcs |
| 1 x | Indoor landing gear set |
| 1 x | Fuselage Bags JEEMO |
| 1 x | 160 mm carbon undercarriage (2pcs) |
| 1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 5m |
| 1 x | X-RAY Micro QR |
| 1 x | Servo Robbe FS 525 BB MG HV |
| 2 x | Q-12 X-light 2000 mm Electric |
| 1 x | Set freno para ruedas Dia. 127 mm |
| 1 x | Wheel FEMA 100 mm / 6 mm |
 |
| 21,577.20EUR |
