| 1 x | Round Rod 1,25x1000 mm |
| 1 x | Strip 1,5x1,5x330 mm |
| 1 x | Strip 3,5x1,75x330 mm |
| 1 x | ABS Strip 1.5x3.0x1000 mm |
| 1 x | ABS Strip 1.0x4.0x1000 mm |
| 1 x | ABS Strip 1.5x4.0x1000 mm |
| 1 x | ABS I Strip 10x5x1000 mm |
| 1 x | Strip ABS 2.0x8.0x1000 mm |
| 1 x | Round Rod 1,0x1000 mm |
| 1 x | ABS Strip 1.0x3.0x1000 mm |
| 1 x | Strip ABS 2.0x5.0x1000 mm |
| 1 x | Round Rod 6,0x1000 mm |
| 1 x | ABS Strip 1.5x2.0x1000 mm |
| 1 x | ABS Strip 1.5x8.0x1000 mm |
| 1 x | Strip ABS 2.0x3.0x1000 mm |
| 1 x | Strip 2,5x1,25x330 mm |
| 3 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
| 2 x | SAVOX SH 0254 servo |
| 3 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 2 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 1 x | Locking cable tie 4.6x203 (uds) |
| 2 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | 1/4 Pilot "Heidi" |
| 1 x | 1/6 Pilot "Tony" |
| 1 x | 1/6 Pilot "Cindy" |
| 1 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
| 2 x | Civilian pilot "Curt" size 9cm (Slimline) |
| 1 x | Pilot JAN 1/4 Saiplanes |
| 1 x | Piloto Jet "Red" 1/6 Scale |
| 1 x | Piloto jet 130 mm |
| 1 x | 1/10 Pilot "Jimmy" |
| 1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
| 1 x | 1/12 Pilot "Cougar" |
| 1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
| 1 x | Piloto Jet "Green" 1/6 Scale |
| 1 x | 1/12 Pilot "Langley" |
| 2 x | 1/4 Pilot "Mike" |
| 2 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
| 1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
| 1 x | Piloto JET 1:3,5 |
| 1 x | 1/6 Pilot "Garry" |
| 1 x | Pilot "Goose" (Slimline) |
| 1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
| 1 x | MYLAR film A350 (1000x500 mm) |
| 1 x | Extension 90 cm (Futaba) |
| 1 x | Propadapter for motor A60-V2 |
| 1 x | Shaft for A60-XS-V2 (112,5mm) |
| 1 x | JETImodel Addcap 820 |
| 1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Strip 2,0x2,0x330 mm |
| 1 x | TX 250 mW especial GOPRO |
| 3 x | Optical RPM Sensor |
| 1 x | ABS Strip 1.0x5.0x1000 mm |
| 1 x | Motor Moki S 250 cc 5 cyl with autostarter |
| 1 x | Split M1,2x10 (10 pcs) |
| 1 x | Tip wing protector 30x10 (2 pcs) |
| 2 x | Cable grommet Ø 5 mm (4 uds) |
| 1 x | Servo inverter |
| 2 x | Servo inverter |
| 1 x | 28x5 mm wires output (2 pcs) |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 2 x | Allen wheel collar M4x4 |
| 1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
| 1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
| 1 x | U Profile ABS 5,0x10,0x1000 mm |
| 1 x | Profile ABS half cane 2.5x1000 mm |
| 2 x | Profile ABS Square 3 x 1000 mm |
| 1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
| 1 x | U Profile ABS 3,0x6,0x1000 mm |
| 1 x | ABS angle 4,0x4,0x1000 mm |
| 2 x | Profile ABS Square 2 x 1000 mm |
| 1 x | Profile ABS Square 1 x 1000 mm |
| 1 x | T-Connector 4.0 mm x 1000 mm |
| 1 x | Profile ABS half cane 2.0x1000 mm |
| 1 x | ABS angle 6,0x6,0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
| 1 x | Short ball link M1.6 (6 uds) |
| 1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
| 1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
| 1 x | Long ball link M3 (6 uds) |
| 1 x | SSPS105 Super Hi-Power servo |
| 2 x | Interruptor RX/Batterie |
| 2 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 2 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Female connector for 6 pines AWG |
| 1 x | BULL MØ1 2.600mm BLUE |
| 2 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
| 1 x | Pushrod greyline 4/3 with coupler M3 |
| 1 x | Motor DLE 30 cc V2 |
| 1 x | ZENOAH ZG 26SC with magneto ignition |
| 1 x | Motor UMS Radial-7-50cc gas |
| 1 x | Cylinder-piston Assembly 30cc |
| 1 x | Rear cover O-ring 26/30 cc |
| 1 x | Head Gasket 30cc (3 pcs) |
| 1 x | Motor DLE 55 RA |
| 1 x | Carburador DA-35, DA-50R-DA-100L , VM-60/70 |
| 1 x | Piston ring for DA-85 and DA-170 |
| 1 x | Motor NGH GF 150 R5 |
| 1 x | Cylinder DA-50R, DA-100, DA-100L |
| 1 x | Electric starter suitable for the DLE111, DLE120 and DLE85. |
| 1 x | Ignition KOLM BX-155-2 Engine |
| 1 x | Drilling-template set for Moki engines Moki S150, S180, S215, S2 |
| 1 x | Stainless Steel Bend D 15x0,4mm |
| 1 x | Giant Scale Muffler D.A. 170 (2 pcs) |
| 1 x | Tufnol Choke Lever Arm d=4,7mm |
| 1 x | Motor Moki S 400 cc 5 cylinders |
| 1 x | DA 70 Twin Gas Engine |
| 1 x | DYNAMOMETER S-1580 |
| 2 x | Female connector JST SH 1.0mm with 10 cm wire |
| 2 x | TrainerCord (master-learner) |
| 1 x | Adapter 3,0 mm M8 |
| 1 x | 2 mm Prop Adapter M5 |
| 1 x | Adapter 3,2 mm M5 for spinner 30 mm fixed propeller |
| 1 x | Landing gear frontal support 29x26x13,5 |
| 1 x | Sparkplug Champion RCJ-7Y for ZG |
| 1 x | Sparkplug NGK CM6 |
| 1 x | Connector CAN 15 |
| 1 x | PSC 6 |
| 1 x | 30 cm BEC cable (female) |
| 1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | Woodruff key for DA50/85/100/150 and DA 200 |
| 1 x | Joint for DA-50 reed valv |
| 1 x | Escape Moki 100 BVT |
| 1 x | Motor Moki 180 |
| 1 x | Motor MOKI S 250 cc 7-cylindrer |
| 1 x | Carburator Moki S400 |
| 1 x | Pick up for motor Moki 250 cc 7 cylinders |
| 1 x | MOKI S250 Intake Bend |
| 1 x | Adapter 5,0 mm M8 |
| 1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
| 1 x | Adapter 3,2 mm M8 |
| 1 x | Adapter 3,2 mm M6 |
| 1 x | Professional Servo tester |
| 1 x | 4 mm Prop Adapter M6 |
| 1 x | Fully Threaded Steel Rod M3 |
| 1 x | Tip wing protector 28x10x12 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 1 x | Pushrod octagone 4/3 |
| 1 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 1 x | 800TVL CMOS camera for FPV |
| 1 x | ABS "T" angle 2.0x2.0x1000 mm |
| 1 x | ABS "T" angle 8.0x8.0x1000 mm |
| 1 x | Profile ABS triangular 6.0x1000 mm 90º |
| 1 x | Sparkplug 1/4-32 EVO 10GX |
| 1 x | Sparkplug 1/4-32 Glow |
| 1 x | Sparkplug DLE CM6 |
| 1 x | DLE 111 pipe plug |
| 1 x | Bujia OS G5 gasolina |
| 1 x | Male connector for 6 pines AWG |
| 1 x | Connector Sub-D 2+5 Female |
| 1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | 30 cm BEC cable (male) |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | PSC 5 |
| 1 x | CC 03 |
| 1 x | Prolonguer for Balancer Thunder Power 6S |
| 1 x | USB interface ALTIS |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Male Prolonger TP 4/5S |
| 1 x | 4 LiPo XH>EH adapter |
| 1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
| 1 x | CC 01 |
| 1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
| 1 x | 41x5,5 mm wires output (2 pcs) |
 |
| 34,240.86EUR |
