| 1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
| 1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
| 1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
| 1 x | Carbon roving DowAksa / 24k / 1600 tex |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 1 x | Aluminium wide washer M3 blue (4 pcs) |
| 1 x | Aluminium wide washer M4 Blue (4 pcs) |
| 1 x | Spring lock washer 2.1 mm (20 pcs) |
| 1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
| 1 x | Lock washer 2.2 mm (20 pcs) |
| 1 x | Aluminium cap bolt washer M3 red (8 pcs) |
| 1 x | Circlik for shaft 1.9 mm (10 pcs) |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 2 x | BALSA triangular 10x10x1000 mm |
| 2 x | Beech dowels 10 mm x 1000 mm |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | Parachute P4 |
| 1 x | Ballast 700gr OPALE |
| 1 x | MAX pilot ARTF |
| 1 x | Windsock Ozone L -1200 mm |
| 1 x | Aramid 50 daN 50 m |
| 1 x | Opale Rucksack |
| 2 x | Wing OXY 0,5 pulgadas2 |
| 2 x | Para-RC "RC-Evo-Cross" Rescue |
| 1 x | Trike XL motor set (motor+esc+prop) |
| 2 x | Set cintas unión paracaídas 145 cm |
| 2 x | Wing OXY 5,0 m2 |
| 1 x | Paramotor Trike XL |
| 2 x | Paramotor BackPack XXS (without accessories) |
| 2 x | Para-RC Trike "RC-Bullix" |
| 2 x | Paramotor Kit Camo H1.5/ Ben Red |
| 1 x | Windsock Ozone L - 700 mm |
| 2 x | Surface Indicator Gauge Small |
| 1 x | Propeller balancer |
| 2 x | Propeller balancer |
| 2 x | Truck-trailer for gliders 720 x 239 mm |
| 2 x | Medidor ángulos y/o incidencias |
| 1 x | Towing hook |
| 1 x | Connectors banna oro 6,0 mm (M/F) |
| 2 x | Small pinned hinge (12 uds) |
| 2 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
| 1 x | Piloto jet 130 mm |
| 1 x | Brass rod Ø 1.0 mm x 1000 mm |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
| 4 x | Landing gear axle Ø 6 mm (2 uds) |
| 1 x | Landing gear axle Ø 8 mm (2 uds) |
| 1 x | 89x25 mm (3.50") Type jets aluminium core wheel |
| 1 x | 73x24 mm hard foam KOVO wheel with bearing (2 pcs) |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
| 1 x | Field folding model stand |
| 1 x | Screw M3x30 (10 pcs) |
| 1 x | Treaded hexagonal socket insert M3 Br (4 pcs) |
| 1 x | Socket Head Screw M2x10 |
| 1 x | Screws 2,2 x 6,5 mm (20 pcs) |
| 1 x | Servo M2x5/16 screw (4 pcs) |
| 1 x | Treaded hexagonal socket insert M4 Br (4 pcs) |
| 1 x | Screw M3x20 (10 pcs) |
| 1 x | Screw M4x30 (10 pcs) |
| 1 x | Spring lock washer 2.6 mm (20 pcs) |
| 1 x | Tapping Screw M2.2x65 (10 pcs) |
| 1 x | Titanium M3x0,5x6 mm Flat Head screw (4 pcs) |
| 1 x | FESTO connector 1/8 Quick 6mm 90º |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | Balsa panel 4.0x100x1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | 38x4,5 mm wires output (2 pcs) |
| 1 x | Servo HITEC HS-225 MG |
| 2 x | Cable grommet Ø 4 mm (4 uds) |
| 2 x | Snap long M2 (10 uds) |
| 2 x | Split M1,2x10 (10 pcs) |
| 1 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
| 3 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 2 x | Servo HS-5565MH High Voltage |
| 1 x | Servo HITEC HS-5475 HB Digi |
| 1 x | Allen wheel collar M3x3 |
| 2 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Servo HITEC D-955 TW Titanium |
| 2 x | Servo HITEC D951 TW |
| 1 x | Servo lock HS-80/81/82/85 (2 pcs) |
| 1 x | Servo HITEC D131 MW nano |
| 1 x | Servo HITEC D950 TW |
| 1 x | Snap for floding prop for 2 mm axi |
| 1 x | Servo HITEC D941 TW |
| 1 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
| 1 x | Snap short M2 (10 uds) |
| 2 x | Servo HITEC HS-5087 MH |
| 2 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 2 x | Allen wheel collar M4x6 |
| 1 x | Split pin 1.6x16 mm (10 uds) |
| 3 x | 28x5 mm wires output (2 pcs) |
| 1 x | Servo HITEC HS-5585MH |
| 1 x | Allen wheel collar M4x4 |
| 1 x | Servo case HS-225MG/225BB/5245MG |
| 1 x | Tip wing protector 28x10x12 (2 pcs) |
| 1 x | Servo HITEC D645 MW |
| 1 x | HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program |
| 2 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 1 x | Servo HITEC HS-45 HB |
| 1 x | T- Fittings red color (2pcs) |
| 1 x | Conector FESTO M3 Quick 3mm 90º |
| 2 x | Deposito combustible tipo "turbina" 330 ml |
| 2 x | FESTO connector M7 Quick 6mm 90º |
| 1 x | Pin hinge 39x20 mm (10 uds) |
| 1 x | U Profile ABS 2,0x4,0x1000 mm |
| 1 x | U Profile ABS 8,0x4,0x1000 mm |
| 2 x | FESTO connector M5 Quick 6 mm |
| 2 x | FESTO connector M7 barb fitting 4mm |
| 1 x | Quick hose connector 4-3 mm |
| 2 x | FESTO connector M7 barb fitting XL Tygon |
| 1 x | Scale exhaust K100TP |
| 1 x | 1000 ccm gasoline fuel tank |
| 2 x | 280 cc gasoline fuel tank complet |
| 3 x | Pin hinge 34x16 mm (10 uds) |
| 1 x | Balsa panel 6.0x100x1000 mm |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | Balsa panel 3.0x100x1000 mm |
| 1 x | A/C quality beech plywood 600x300x8.0 mm |
| 2 x | Landing gear frontal support 29x26x13,5 |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | Parachute PV6 for F3J |
| 1 x | Wheel FEMA 165 mm / 8 mm |
| 1 x | Wheel 22 mm |
| 1 x | Wheel Ø 75 mm (1 ud) Electron Retracts |
| 1 x | Superlight wheel 125 mm with valve (2 pcs) |
| 1 x | Landing gear axle Ø 4 mm (2 uds) |
| 1 x | Wheel collar 3 mm Ø (4 uds) |
| 2 x | Landing gear axle Ø 5 mm (2 uds) |
| 2 x | Cross Connector 4.0 mm x 1000 mm |
| 2 x | AL Axle Shaft 4.0x16 mm (2 uds) |
| 2 x | Landing gear axle 4x21 4 mm (2 uds) |
| 1 x | Mould Resin P 10 kg |
| 1 x | Profile ABS half cane 3x1000 mm |
| 1 x | Wheel FEMA 82 mm / 5 mm |
| 1 x | Wheel FEMA 90 mm / 6 mm |
| 1 x | Wheel FEMA 178 mm / 8 mm |
| 1 x | Fuel line plug Small 2 pcs |
| 1 x | Aluminium cap bolt washer M4 green (8 pcs) |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | Propeller hub spacer 8/5.5 |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | 41x5,5 mm wires output (2 pcs) |
| 1 x | Servo HITEC D625 MW |
| 2 x | Tip wing protector 30x10 (2 pcs) |
| 1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
| 1 x | Small flex hinge (12 uds) |
| 1 x | ABS rectangular profile 10x5.0x1000 mm |
| 1 x | ABS angle 5,0x5,0x1000 mm |
| 1 x | ABS "T" angle 6.0x6.0x1000 mm |
| 1 x | Profile ABS Square 3 x 1000 mm |
| 1 x | ABS angle 6,0x6,0x1000 mm |
| 1 x | ABS "T" angle 2.0x2.0x1000 mm |
| 1 x | L-Connector 4.0 mm x 1000 mm |
| 1 x | Extra hard 1500 ccm complete gasoline fuel tank |
| 1 x | 550 cc gasoline fuel tank complet |
| 1 x | Fuel Fittings-Blue |
| 1 x | Miniature brass strap hinge, 1 m |
| 1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
| 1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 1 x | Long pinned hinge (6 uds) |
| 1 x | Glow Plug Clip 1.3 Ah |
| 1 x | Glases Innovation Plus |
| 1 x | Aluminium cap bolt washer M3 green (8 pcs) |
| 1 x | Flat washer 2.2 mm (20 pcs) |
| 1 x | Aluminium wide washer M3 red (4 pcs) |
| 1 x | Aluminium wide washer M4 Black (4 pcs) |
| 1 x | Aluminium wide washer M4 Gold (4 pcs) |
| 1 x | FESTO Polyurethan tube for turbine 4x2,5x1000 mm (transparent) |
| 1 x | FESTO connector M5 Quick 4 mm |
| 2 x | Fuel Fittings-Gold |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | Lite Plywood panel 600x300x3.0 mm |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 1 x | Servo HS-5070 MH Hi Volt |
| 1 x | Cable grommet Ø 5 mm (4 uds) |
| 1 x | Canopy Latch |
| 1 x | Control for forward wheel (MINI) |
| 1 x | Servo HITEC HS-125 MG |
| 1 x | Split pin 1x8 mm (10 uds) |
| 1 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
| 1 x | Brazo servo aluminio HITEC HS-125MG/5125MG |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Servo HITEC HS-5085 MG Digi |
| 1 x | Allen wheel collar M3x5 |
| 1 x | Servo HITEC D145 SW |
| 1 x | Small pinned hinge (6 uds) |
| 1 x | Profile ABS half cane 4x1000 mm |
| 1 x | Profile ABS triangular 6.0x1000 mm 90º |
| 1 x | Rubber profile 8-2 mm 2M |
| 1 x | Rubber profile 6-2 mm 2M |
| 1 x | Couple M4 for wire (10 pcs) |
| 1 x | Profile ABS half cane 6.0x1000 mm |
| 1 x | Profile ABS triangular 4.0x1000 mm 60º |
| 1 x | Flat Connector 4.0 mm x 1000 mm |
| 1 x | Profile ABS half cane 2.0x1000 mm |
| 1 x | Profile ABS half cane 2.5x1000 mm |
| 1 x | Profile ABS triangular 2.0x1000 mm 90º |
| 1 x | Profile ABS half cane 5.0x1000 mm |
| 1 x | L-Connector 1.5 mm x 1000 mm |
| 1 x | ABS angle 4,0x4,0x1000 mm |
| 1 x | ABS rectangular profile 12x6.0x1000 mm |
| 1 x | ABS angle 10,0x10,0x1000 mm |
| 1 x | 1000 ccm complete gasoline fuel tank |
| 1 x | Quick hose connector 6-6 mm |
| 1 x | FESTO connector M7 Quick 4 mm |
| 1 x | Y-Hose connector 4-4-4mm |
| 1 x | Quick hose connector 4-4 mm |
| 1 x | 1000 cc gasoline fuel tank complet |
| 1 x | Extra hard 250 ccm complete gasoline fuel tank |
| 1 x | Fuel tank 500ml (17oz) |
| 1 x | FESTO connector M7 Quick 4mm 90º |
| 1 x | T-Hose connector 3-3-3 mm |
| 1 x | Support 45% Hopper JetsMunt |
| 1 x | BETA 1400 RTF Red |
| 1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 1 x | Large flex hinge (12 uds) |
| 1 x | 15 mm reinforced hinge |
| 1 x | Gates hinge 30x16 mm (2 pcs) |
| 1 x | Micro flex hinge (12 uds) |
| 1 x | Gates hinge |
| 1 x | Flap hinge 33x9 mm (6 pcs) |
| 1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
| 1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
| 1 x | Gates hinge black 30x16 mm (2 pcs) |
| 1 x | 25 mm reinforced hinge |
| 1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
| 1 x | M3-M4 rubber washer (8 pcs) |
| 1 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 1 x | Gates hinge aluminium (1 pcs) |
| 1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain) |
| 1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 1 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | Fast'n EZ-CA-Hinge (12 uds) |
| 1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | 18 mm reinforced hinge |
| 2 x | Truck-trailer for gliders 720 x 285 mm |
| 1 x | WingFix ULTRA Black Edition |
| 1 x | 69x25 mm (2.75") axle Ø4 mm aluminium core wheel |
| 1 x | Field folding model stand SebArt |
| 1 x | Pin hinge 26x11 mm (10 uds) |
| 1 x | Angle of incidence meter |
| 1 x | Angle measurer |
| 1 x | |
 |
| 13,101.69EUR |
