2 x | DA-50 Carburator |
1 x | 60 mm long Prop hub for ZG45SL, ZG62/S/SL and ZG80B |
1 x | Crankcase Gasket set for ZG 74 / ZG 80 |
1 x | 15 cm PTFE-tubing for 25 mm tubes |
2 x | Insulator ZG 20 |
2 x | Fixing Ring with Base 60 mm |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 36 mm |
1 x | Cilinder joint for G230RC/G260RC |
1 x | Flat version carb bend for the ZG 62 |
1 x | Header ZG 45/62, "wide" |
1 x | Cylinder ZG 26SC/SLH |
1 x | Gasket carburettor/insulator for ZG 38/S/SC |
1 x | Ignition for ZG motors |
1 x | Cylinder gasket ZG22 / ZG23 / G2D70 / G2D96-D |
1 x | Gasket, insulator ZG 20 |
1 x | Header ZG 45/62, "normal" |
1 x | Gasket, cylinder ZG 20 |
2 x | Gearwheel 9724/09 for ZG 45 |
1 x | Aluminium Motor Mount ZG23SL/H/M and ZG26SC/SCM, ZG231SLH |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 72 mm |
1 x | Cylinder for ZG20 |
1 x | Carburettor and crankcase nipple for ZG45SL, ZG62/S/SL and ZG74B |
1 x | Carburetor for ZG45SL and ZG62/S/SL |
1 x | Insulator block ZG 38/S/SC |
1 x | Ignition module ZG 38/S/SC |
1 x | Gasket carb - intake manifold for ZG 74B/ZG 80G |
1 x | Gasket cylinder / insulator for ZG 38/S/SC |
2 x | Intake tube ZG 74/80, DA85, VM 170-420 with special screws |
1 x | ZENOAH ZG26 SCM Marine Engine |
2 x | ZENOAH ZG 26SC with magneto ignition |
2 x | ZENOAH/ZG 20cc |
4 x | ZENOAH ZG 26SLH Helicopter Engine |
2 x | Reduction gear 2.8:1 for ZG 38 inline version |
3 x | Pitts Muffler kit for CAP 21 |
1 x | Canister combo DLE 111 cc |
1 x | 90° TUBE-ANGLE Ø 28 mm |
1 x | KS86 V muffler up to 65cc |
2 x | Captador RCEXL para DA |
1 x | Giant Scale Muffler SLIMLINE D.A. 100 (2pcs) |
1 x | 90° TUBE-ANGLE Ø 25 mm |
1 x | Stainless Steel Muffler D.A. 50/100/120 |
1 x | Air Intake manifold 90° - Large |
1 x | Stainless Steel Bend D 28x0,6mm |
1 x | Stainless Steel Bend D 15x0,4mm |
1 x | Stainless Steel Bend D 22x0,5mm |
2 x | Stainless Steel Bend D 20x0,6mm |
1 x | Stainess steel exhaust flange for ZG20 / ZG22 / ZG23/ ZG26 / G23 |
1 x | Exhaust gasket for ZG20/ZG22/ZG23/ZG231 ZG26/G2D96-D/G230RC/G260 |
1 x | Exhaust gasket Valach 85 |
1 x | Motor MOKI S 250 cc 7-cylindrer |
1 x | Motor DA 50-R |
1 x | ZENOAH ZG 62 SL |
1 x | Canister combo DLE 55 cc |
1 x | TUNED PIPE for motors up to 40-60 & 70-85 cc |
1 x | Pitts Muffler for D.A. 120 |
1 x | Silencer with rear exhaust DA-120 |
1 x | Stainless Steel Muffler D.A. 35-70 |
2 x | Propeller diller for DLE111 and DA85-150 |
2 x | Tufnol Choke Lever Arm d=4,7mm |
1 x | COMFORT MOUNT ø 25 mm |
2 x | Filetro gasoline filter Tillotson OW497 |
1 x | Opto Gas Engine Kill Switch |
1 x | Spring Clip 25 mm teflon tube |
1 x | DA-50R motor alumine support |
1 x | 40 mm gas motor standoff |
1 x | Saito FG-36 motor support |
1 x | Spring Clip 16 mm teflon tube |
1 x | Gasket for motor DA 50 |
1 x | Selfstart electronic switch |
1 x | 50 mm gas motor standoff |
1 x | Extension Ø25mm x L: 60 mm |
1 x | Propeller diller for DA50, DLE55 red |
1 x | Tufnol flange carburator |
1 x | Tacometer mini ignition RCEXL |
1 x | Gasket for motor DA 50 |
1 x | Metalic joint for DA-50R/DA100 cilinder/elbow |
2 x | Gasket for motor DA 50-R |
1 x | 152x46 Ø6.0 mm aluminium core wheel |
1 x | Spikes Band (5 m) |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | 120x60 mm C SLH KOVO wheel |
1 x | 1,2x1000 mm 2:1 red termoretract tube |
1 x | 20x200 mm battery rings |
2 x | 1/6 Pilot "Garry" |
1 x | Connectors banna oro 3,5 mm (M/F) |
1 x | MPX Sub-D Adaptor |
1 x | Conector BEC male (10 pcs) |
1 x | XH female balance (2S) connector (2 pcs) |
1 x | Strip 3,5x1,75x330 mm |
1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Glases Ace |
1 x | Oracover CHROME 2m |
1 x | Threaded coupler M3 (10 uds) |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | 127x43 Ø6.0 mm aluminium core wheel |
1 x | 1/6 Pilot "Tony" |
2 x | Glases Stratus |
1 x | Connector CAN 15 |
3 x | 1/12 Pilot "Tom" |
1 x | 1/6 Pilot "Cindy" |
2 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Connectors banna oro 8,0 mm (M/F) |
1 x | Oracover Black 2 m |
1 x | Motor DA 100L |
1 x | Motor DA 120 |
1 x | Monokote BLANCO jet (1.8x0.65m) |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | 10 mm gas motor standoff |
1 x | 1/10 Pilot "Jack" |
1 x | SE Ring 200 mm (2 pcs) |
1 x | XH female balance (5S) connector (2 pcs) |
1 x | Glases Nimbus "Black" |
2 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Pilot "Duke" Legends Series (Slimline) |
1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
1 x | Glases Flitemaster |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
1 x | 2,4x1000 mm 2:1 green termoretract tube |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
2 x | 1/7 Pilot "Japanese" |
1 x | |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Piloto Jet "Red" 1/6 Scale |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | Round Rod 1,25x1000 mm |
1 x | Connectors DEANS (T) |
1 x | 160 mm carbon undercarriage (2pcs) |
1 x | SE Ring 480 mm (2 pcs) |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Foil for sticking flaps and ailerons |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Round Rod 1,5x1000 mm |
1 x | 1/4 Pilot "Heidi" |
2 x | Oracover Brown 2 m |
2 x | BETA 1400 ARF Red |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | KAVAN Hand crank fuel pump |
1 x | Ciano KAVAN Thick 20g |
1 x | Ciano KAVAN Medium 20g |
1 x | Glow starter with charger 230v |
2 x | Ciano KAVAN Super Thin 20g |
1 x | Electric Fuel Pump 12v |
1 x | Ball Bearing Oil 25 ml |
1 x | ZG231cc SHL |
3 x | ZENOAH ZG 38 SC with Choke Carburettor |
1 x | Combustible Glow "KAVAN" air/heli 5% nitro |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | Glow Plug Clip 1.3 Ah |
1 x | Spinner 40 mm Black (Kavan) |
1 x | Ciano KAVAN Thin 20g |
1 x | Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB |
2 x | Conector MT-60 (pair) |
1 x | SKY RC T400Q Charger 4x100w |
1 x | OS GT15 W/E-4040 for airplane |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | Adaptadores carga 6s JST-XH |
2 x | Combustible Glow "KAVAN" air/heli 15% nitro |
2 x | Charger SKY RC e680 |
1 x | Pin hinge 34x16 mm (10 uds) |
1 x | ZENOAH ZG 80B |
1 x | Universal Charging Lead - 500mm - 4mm to Glow Plug Igniter |
1 x | PCI-HV ignition conversion set with Zenoah rubber plug cap for Z |
2 x | Brazo servo KAVAN doble aluminio 25T - 2.5" M3 |
1 x | Conector MR-60 (pareja) |
1 x | Sensor Ignition RCEXL Universal |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Oracover Black 10 m |
1 x | 4,8x1000 mm 2:1 blue termoretract tube |
1 x | 12.7 mm 2:1 black termoretract tube |
1 x | ABS Strip 1.0x3.0x1000 mm |
1 x | Spinner plastic white fixed propeller 51 mm |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Cockpit aluminium closing 4.7g |
1 x | Radial heatsink for MPJ AC25/35-xx motor |
2 x | 1/10 Pilot "Jimmy" |
1 x | Solid Headers for Single Cylinder DA-60 Solid 50mm drop |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
1 x | ALU servo arm 90º 3 mm shaft |
1 x | ALU double servo arm 3 mm shaft |
1 x | Gear for D 200 BX |
1 x | Menbrane joint for DA 50-R |
1 x | Stainless Steel Bend D 25x0,5mm |
1 x | Servo BMS-4112 |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | 20 mm gas motor standoff |
1 x | 6,4x1000 mm 2:1 red termoretract tube |
1 x | Monokote ROJO misil (1.8x0.65m) |
1 x | 4,8x1000 mm 2:1 black termoretract tube |
1 x | 2,4x1000 mm 2:1 black termoretract tube |
1 x | 6,4x1000 mm 2:1 green termoretract tube |
1 x | 6,4x1000 mm 2:1 black termoretract tube |
1 x | Crystal Universal RX 35.040 Ch 64 |
1 x | 550 cc gasoline fuel tank complet |
1 x | Hot Glue Stick GREEN |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | |
1 x | 3D Spinner for DLE 30 |
1 x | Spinner 159x200 mm GFK |
1 x | Spinner 90 mm CFK |
1 x | Round Rod 2,5x1000 mm |
1 x | Partall paste 650 g |
1 x | Fuel tank 500ml (17oz) |
1 x | O-Ring SAITO FG-60 R3 |
1 x | Round Rod 6,0x1000 mm |
1 x | Baseplate servo |
1 x | Fod Guard 94x32 mm |
1 x | Round Rod 4,0x1000 mm |
1 x | 12 mm floating pad (49 pcs) |
1 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
1 x | Connectors MPX male (PIN double) |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | Magnetic Connect locking system |
1 x | 1/4 Pilot "Mike" |
1 x | Connectors MPX female (PIN double) |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | Hot Glue Stick BLACK |
1 x | 45 mm aluminium spinner (Kavan) |
1 x | Debonder CA 20g |
1 x | Blade holder metal LAMA |
1 x | Birch plywood plate 600x300x1.2 mm |
1 x | M3 Maxi ball link (2 uds) |
1 x | Servo GO-13 MG 13g 2.8 Kg 0.12s/60º |
1 x | Servo GO-1280 MG 40 kg.cm 0.085s/60º |
1 x | SAVAGE Max Red 1080 mm |
1 x | 50 mm aluminium spinner (Kavan) |
1 x | BETA 1400 RTF Red |
1 x | Motor UMS Radial-7-35cc glow |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | Round Rod 1.0x3.5 cm |
1 x | |
1 x | 25 mm Sandpaper file |
1 x | Battery LiPo GRE18 600 mAh 7.4v |
1 x | UMS radial-engine, 7 cylinder 90ccm, gas |
1 x | Motor UMS Radial-5-150cc gas |
|
28,635.54EUR |