| 3 x | BALSA triangular 15x15x1000 mm |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 2 x | Pine wood slat 1.5x3.0x1000 mm |
| 2 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | Liston HAYA 3 x 10 x 1000 mm |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 2 x | Beech dowels 2.0 x 1000 mm |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 2 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | Pine wood slat 3.0x5.0x1000 mm |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | Tape GFK 25 mm |
| 2 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
| 1 x | SE Ring 300 mm (2 pcs) |
| 1 x | SE Ring HACKER 300 mm (2 pcs) |
| 1 x | Kwik link AL M3 con Clip (2 pcs) |
| 1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
| 1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
| 1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
| 1 x | Ball link Aluminio M3 (2 pcs) |
| 1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
| 1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
| 1 x | Threaded coupler M3 (10 uds) |
| 1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
| 1 x | Z type of cable coupler Ø 1 (2 uds) |
| 1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
| 1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
| 1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
| 1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
| 1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Ball link V1 Ø7 M4/3 (6 uds) |
| 1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
| 1 x | Aluminium red ball links M3 V1 (10 pcs) |
| 1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
| 1 x | Z type of cable coupler Ø 1.8 (2 uds) |
| 1 x | Angled clevis with threaded rod M3 |
| 1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
| 1 x | Ball link duraluminium M3 V1 (10 pcs) |
| 1 x | Brass ball links BS M3 V1 (10 pcs) |
| 1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | One touch canopy lock |
| 1 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 2 x | Cierre cabina aluminio Ø4, I=10 mm |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | Screw-lock connector M2 (2 uds) |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Locking cable tie 4.6x203 (uds) |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Canopy Latch |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | Oratex Antik 2m |
| 1 x | Ply-Span 450x600/13g Yellow |
| 1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
| 1 x | Blue smoke canister 100 g |
| 1 x | Straightened rod Ø 1.5 mm x 1500 mm |
| 1 x | Parachute PV6 for F3J |
| 1 x | Silent-blocks DLE 170M |
| 1 x | A/C economy plywood 600x300x6+.0 mm |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
| 1 x | Support Pitot JETI |
| 1 x | Balsa panel 2.5x100x1000 mm |
| 1 x | Ancla 40 x 24 mm (2 pcs) |
| 1 x | Ancla metal 40 mm (2 uds) |
| 1 x | Anchor of tow Met. 60 mm |
| 1 x | Joint for loading boom 2 pairs, 10 x 5 mm |
| 1 x | La Capitania di Venetia accesories |
| 1 x | Alfileres de cobre 0,7 x 7 mm, aprox.50 g |
| 1 x | Rigid coupling brass Ø 4.0 / 3.2 mm L: 25 mm |
| 1 x | 2,3 mm Prop Drive Günther M4 |
| 1 x | Rigid coupling brass Ø 5.0 / 4.0 mm L: 25 mm |
| 1 x | Anchor 25 mm (2 uds) |
| 1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
| 1 x | Pine wood slat 10x10x1000 mm |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | SE Ring 400 mm (2 pcs) |
| 1 x | Waterproof adhesive tape, width 19mm, length 25m |
| 1 x | Blue aluminium servo arm V1-Hitec 1,5" inch M3 |
| 1 x | Servo GO-09 9g |
| 1 x | Servo DITEX TD2612S |
| 1 x | Blue aluminium servo arm V2-Hitec 1,0 inch M3 |
| 1 x | Servo GO-12S69MG 26kg.cm 0.10s/60º |
| 1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
| 1 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
| 1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
| 1 x | Servo GO-1053 MG 20.0kg |
| 1 x | Tape GFK 50 mm |
| 1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
| 1 x | aluminium servo arm V2-JR 2,0 inch M3 |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Servo GO-1088MGW 74 kg.cm 0.125s/60º |
| 1 x | wire tensioner (silver) |
| 1 x | SE Ring 200 mm (2 pcs) |
| 1 x | Servo FUTABA SBL 471 SV |
| 1 x | White large kwik link (10 pcs) |
| 1 x | Double aluminium servo arm V1-Hitec 2,5 inch M3 (blue) |
| 1 x | Servo GO-10S41MG 10.5 kg.cm 0.075s/60º |
| 1 x | Xplorer1 anemometro |
 |
| 1,797.22EUR |
under request
temporarily out of stock
few units
