1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Crimping tool |
1 x | 2,5x60 mm allen screwdriver |
1 x | Ball Link Plier |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Hot Glue Stick RED |
1 x | Carbon fiber rod 1.0 mm x 1000 mm |
1 x | Propeller POWER-PROP 13x9 |
1 x | FALCON 20X9 CARBON PROPELLER (GAS) |
1 x | Starter EM Gear Power 80 |
1 x | |
1 x | Dust collector for mould cleaning |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Hot Glue Stick BLACK |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Canopy Latch |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Locking cable tie 2.5x100 (uds) |
2 x | Xplorer1 anemometro |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
2 x | Xplorer3 anemometro |
1 x | SUS wire 3m (nylon coated) |
1 x | Ventus 1:4 set of instruments |
1 x | Flap hinge (6 pcs) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | 18 mm reinforced hinge |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
2 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Large flex hinge (12 uds) |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Micro flex hinge (12 uds) |
1 x | Long pinned hinge (12 uds) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Miniature brass strap hinge, 1 m |
1 x | Small pinned hinge (12 uds) |
1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
1 x | Horn with ball 40x30 |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | Protective open Cover for wires Ø 13 mm 1000 mm |
3 x | Suncover 100cc Red |
1 x | Support conector MPX (6 pcs) |
1 x | Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re |
1 x | DPSI magnetic switch actuator (PCB) |
2 x | Xplorer4 anemometro |
1 x | Round flex hinge (12 uds) |
1 x | Small pinned hinge (6 uds) |
1 x | 25 mm reinforced hinge |
2 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
1 x | Sun Cover PC 21 XXL (JMB Jets) |
3 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
1 x | Propeller CFK 16x13 |
1 x | Propeller CFK 18x16 |
1 x | SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm |
1 x | Propeller CFK 23x12 |
1 x | Propeller CFK 16x17 |
1 x | Propeller CFK 12.75x13 |
1 x | EXTRA 330SC-E 95" Orange/Blue/White |
1 x | Propeller RF CFK 13x6.5 |
1 x | EXTRA NG 85" 2159mm yellow/blue |
1 x | Propeller CFK 12.5x6.5 |
1 x | Propeller CFK 15.5x10 |
1 x | Propeller CFK 18,5x12 |
1 x | Propeller CFK 17x18 |
1 x | Propeller CFK 13x9 |
1 x | Propeller CFK 11x8 |
1 x | Propeller CFK 14x10 |
1 x | Propeller CFK 16x16 Slim |
1 x | Crystal TX 35.010 Ch 61 |
1 x | Piston ring for DA-150 |
1 x | Futaba 54 mm servo arm with ball link |
1 x | Futaba 46 mm servo arm with ball link |
1 x | Propeller Pleg CAM-Prop 8x6 |
1 x | SHOCK CUB 102" 2.600 mm 38-50cc YELLOW (Seagull Models) |
1 x | PARAGON Trainer 46-55 1580 mm |
2 x | Xplorer2 anemometro |
1 x | Crystal TX 35.050 Ch 65 |
1 x | Crystal TX 35.150 Ch 75 |
1 x | Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l) |
1 x | Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l) |
1 x | Cotton Flocks, bag/ 500 g |
1 x | Thixotropic agent TM 100, tin/ 75 g (approx. 1 l) |
1 x | Thixotropic agent TM 100, tin/ 415 g (approx. 5 l) |
1 x | Cotton Flocks, bag/ 7 Kg |
1 x | |
1 x | Glass Bubbles (0.12g) 400 G (aproxx 3.3 l) |
1 x | Blue aluminium servo arm V1-Hitec 1,5" inch M3 |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
1 x | BOSCH spark plug cap for DA 50-R, DA 100 and DA 150 |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Motor Mount for TITAN ZG38/38S/38SC, length 36 mm |
1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Rudder 2_Tray 3.5~4 inch |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | M3-M4 rubber washer (8 pcs) |
1 x | BOSCH spark plug cap for ZG 26SC/SCM, 231SLH, G230RC |
1 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
1 x | 5 mm M2 variable horn |
1 x | Hitec 20 mm servo arm |
1 x | Futaba 17 mm servo arm with ball link HITEC |
1 x | FUTABA 20 mm servo arm with ball link |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
|
9,714.50EUR |