Aero-naut

Stock

"L" servo arm 65x49 mm (2 pcs)	2.20EUR	Buy Now	temporarily out of stock
10 mm portholes (10 pcs)	8.55EUR	Buy Now	temporarily out of stock
10 mm Prop Adapter M12	9.90EUR	Buy Now	few units
1000 ml sealer (DOPE)	19.65EUR	Buy Now	under request
10x7 tree blades propeller	22.00EUR	Buy Now	temporarily out of stock
11x7 tree blades propeller	19.50EUR	Buy Now	temporarily out of stock
12 mm mast holder	7.80EUR	Buy Now	temporarily out of stock
12 mm portholes (10 pcs)	18.50EUR	Buy Now	under request
12x6 tree blades propeller	20.00EUR	Buy Now	temporarily out of stock
12x8 tree blades propeller	22.00EUR	Buy Now	temporarily out of stock
14 mm portholes (10 pcs)	10.10EUR	Buy Now	temporarily out of stock
14 mm Portholes for screws (10 pcs)	15.40EUR	Buy Now	temporarily out of stock
15x7 tree blades propeller	32.00EUR	Buy Now	temporarily out of stock
15x7 tree blades propeller LEFT	32.00EUR	Buy Now	temporarily out of stock
16x10 tree blades propeller Master Airscrew	32.50EUR	Buy Now	temporarily out of stock
2 mm Prop Adapter M6	5.00EUR	Buy Now	few units
2,3 mm Prop Adapter M6	4.72EUR	Buy Now	few units
2,3 mm Prop Adapter M6	5.25EUR	Buy Now	many units
2.3 mm Adapter for 30 mm spinners	5.50EUR	Buy Now	temporarily out of stock
25 mm fenders (10 pcs)	6.00EUR	Buy Now	under request
25,0 mm 3-BL M4 hydro-propeller (left hydropropeller)	9.43EUR	Buy Now	temporarily out of stock
25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller)	9.43EUR	Buy Now	temporarily out of stock
250 mm / 16 mm Airbrakes	47.17EUR	Buy Now	temporarily out of stock
28 mm turnbuckle	14.85EUR	Buy Now	temporarily out of stock
29,0 mm propeller (left propeller)	4.00EUR	Buy Now	temporarily out of stock
29,0 mm propeller (rigth propeller)	4.00EUR	Buy Now	temporarily out of stock
290 mm 8x4 M4 shaft ship	55.00EUR	Buy Now	under request
290 mm M4/4 mm Prop shaft	25.00EUR	Buy Now	under request
3 mm Leader (L 100 mm)	3.00EUR	Buy Now	temporarily out of stock
3 mm Prop Adapter M6	5.65EUR	Buy Now	enought units
3 mm Prop Adapter M6	4.75EUR	Buy Now	few units
3,2 mm Prop Adapter M6	6.68EUR	Buy Now	few units
3,2 mm Prop Adapter M6	4.72EUR	Buy Now	few units
3,2 mm Prop Adapter M8	4.72EUR	Buy Now	enought units
3.17 mm Prop Adapter CN-Spinner	5.50EUR	Buy Now	few units
3.2 mm Prop Adapter M6	5.00EUR	Buy Now	few units
3.2 mm Prop Adapter M8	5.17EUR	Buy Now	few units
300x4 mm M4 shaft ship	23.95EUR	Buy Now	under request
31,0 mm propeller (rigth propeller)	4.00EUR	Buy Now	temporarily out of stock
33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)	6.00EUR	Buy Now	temporarily out of stock

Result Pages: 1 2 3 4 5 ... [Next >>] Displaying 1 to 40 (of 761 products)

Quick Find

Shopping Cart

1 x	Aluminium ignition bad (red)
1 x	Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
1 x	Conector JR/Uni Servo female BLUE silicon (10 pcs)
3 x	ABS tube 12.0x10.0x1000 mm
3 x	Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
2 x	Towing hook
1 x	Round Rod 6,0x1000 mm
2 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Carbon fiber flat 1000x3.0x0.5 mm
2 x	Carbon fiber rod 3.0 mm x 1000 mm
2 x	Aluminium wide washer M4 Red (4 pcs)
2 x	Carbon fiber rod 1.5 mm x 1000 mm
3 x	ABS tube 3.0x2.0x330 mm
1 x	Conector Servo female 4 pines
1 x	1/12 Pilot "Langley"
1 x	Adapter 3,0 mm M5 for spinner 30 mm fixed propeller
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	Kwik link with arm M3xM2xL24
1 x	1/6 Pilot "Tony"
2 x	Connectors banna oro 6,0 mm (M/F)
1 x	25 mm gas motor standoff
1 x	Strip 1,5x1,5x330 mm
1 x	Connectors banna oro 3,5 mm (M/F)
2 x	PPM Encoder Module
2 x	Pilot "Goose" (Slimline)
1 x	Round Rod 1,0x1000 mm
2 x	ABS tube 8.0x6.0x1000 mm
3 x	Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm)
3 x	ABS tube 5.0x4.0x156 mm
1 x	Connector CAN 15
2 x	Breatex™ Non-woven absorber 150 g/m² Roll 100m
3 x	Towing hook
2 x	Angled clevis with threaded rod M3
2 x	Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Bag connector 2 mm
2 x	Pilot JAN 1/4 Saiplanes
2 x	ABS tube 5.0x3.0x1000 mm
1 x	Universal Colour Paste deep black 250 g
1 x	Carbon fibre sleeve 12k 170 mm x 5m
2 x	Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm
2 x	Aluminium red ball links M3 V1 (10 pcs)
2 x	Connectors banna oro 8,0 mm (M/F)
2 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Connectors banna oro 4 mm (M/F)
1 x	15 mm gas motor standoff
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	10 mm Quick clamp_L (6 pcs)
1 x	Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
3 x	ABS tube 3.0x1.0x1000 mm
1 x	1/10 Pilot "Jimmy"
1 x	2 mm male connector (2 pcs) with safety connector
2 x	1/6 Pilot "Garry"
1 x	Spray adhesive AEROFIX 2
1 x	Strip 2,5x1,25x330 mm
3 x	P 17×5.8 Prop-2PCS/PAIR
3 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	2 mm female connector (2 pcs) with safety connector
1 x	Connectors banna oro 3 mm (M/F)
1 x	Carbon fiber rod 10 mm x 1000 mm
2 x	ABS tube 7.0x5.0x1000 mm
2 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	1/6 Pilot "Buddy"
2 x	Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
2 x	ABS tube 9.0x7.0x1000 mm
2 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	Landing gear Rocket 400
1 x	Connectors banna oro 2 mm (M/F)
5 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	Round Rod 1,25x1000 mm
4 x	Fixed launching hook
2 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Connectors DEANS (T)
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	1/4 Pilot "Mike"
2 x	Breatex™ Non-woven absorber 150 g/m² Roll 50m
2 x	ABS 500 x 400 x 0,5 mm (white)
1 x	Conector JR Servo female (10 pcs)
1 x	Carbon fiber rod 14 mmx1000 mm
1 x	Conector FUTABA Servo female BLUE silicon (10 pcs)
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	Universal Colour Paste white 50 g
1 x	Conector JR/Uni Servo male BLUE silicon (10 pcs)
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	Straightened threaded rod M2-1m
1 x	Conector FUTABA Servo male BLUE silicon (10 pcs)
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
2 x	ABS 500 x 400 x 1,5 mm (white)
1 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m
2 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
2 x	30 cm MULTIPLEX female connector
2 x	Connectors banna oro 2 mm (M/F) (ultralight)
2 x	Tow hook for tug
1 x	Spray Graphit 33
1 x	30 mm gas motor standoff
1 x	20 mm gas motor standoff
1 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
2 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Carbon fiber rod 2.5 mmx1000 mm
1 x	Cut tube
3 x	ABS tube 20.0x18.0x1000 mm
2 x	Wing bolts M3 Steel screw Red (2 pcs)
2 x	Blade holder upper
2 x	PVC plate 320 x 194 x 0.23 mm (brown)
2 x	Transmitter Stick Ends V1 Red - M3 (2 pcs)
2 x	Wing connector 8pin with pin strip, plug & socket
1 x	Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav
1 x	Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm
1 x	Transmitter Stick Ends V4 Blue/Silver - M3 (2 pcs)
1 x	wire tensioner (silver)
2 x	ABS I Strip 20x10x1000 mm
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
2 x	1,5x50 mm allen screwdriver
3 x	Transmitter Balancer Futaba V
1 x	MPX housing with flange (4 pcs)
1 x	Extinguisher CO2 - 2 Kg
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
2 x	Crimping sleeves for 1.1 mm cable (10 pcs)
2 x	Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm)
1 x	Digital precision scale up to 2000 g
2 x	Rotorshape Elevator
3 x	Esc X-70-OPTO-Pro
1 x	Transmitter Stick Ends V5 Rojo - M3 Futaba/Hitec/Spektrum DX8 (2
1 x	Motor wall
1 x	1/6 Pilot "John"
1 x	Round Rod 5,0x1000 mm
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	Optotronix Aurora Plug
1 x	Strip 3,5x1,75x330 mm
2 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
2 x	Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm)
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	XH female balance (7S) connector (2 pcs)
2 x	ABS tube 6.0x4.0x1000 mm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
2 x	25 mm Sandpaper file
1 x	Switch Cap L (black)
3 x	Transmitter Balancer Futaba FF9-DX7-JR-Hitec
2 x	Carbon fibre sandwich sheet 350x150x3 mm
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	Esc MasterBasic 70SB
2 x	Teflon rollers 40 mm x 15 mm Diam.
2 x	Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x	XH male balance (8S) connector (2 pcs)
1 x	Landing lights 18 mm (0.71in)
1 x
1 x	Aluminium blue ball links M3 V1 (10 pcs)
3 x	CellPRO 4S Adaptader (GP/KO up to 4S)
3 x	Switch Cap M (black)
1 x	Field folding model stand
2 x	LA500 Blades
1 x	XH male balance (7S) connector (2 pcs)
4 x	Motor rotor LA-500
1 x	Peel ply 64 g/m² (plain weave) 150 cm x 10m
1 x	Pulley brass 12/2 (2 pcs)
2 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
2 x	Carbon fiber flat 1000x6.0x0.8 mm
2 x	Thermoforming sheet 0.3mm (0.039in) DIN A4
1 x	XH male balance (3S) connector (2 pcs)
3 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Transmitter Stick Ends V5 Blue - M3 Futaba/Hitec/Spektrum DX8 (2
3 x	USB Interface Adapter
3 x	Pulley brass 14/2 (2 pcs)
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	10 mm gas motor standoff
1 x	Aluminium wide washer M3 blue (4 pcs)
3 x	Squared carbon wing joinner 5x5x220 mm
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Towing hook <3m
1 x	PVC grid diagonal 290x185x0.32 mm
1 x	Propeller set 400 (2R+2L)
2 x	FA27.2×8.9 Prop-2PCS/PAIR
2 x	Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi
2 x	Porta Kwik link M4 4 mm (2 pcs)
2 x	Porta Kwik link M4 3 mm (2 pcs)
1 x	Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm)
1 x	XH male balance (6S) connector (2 pcs)
2 x	Red aluminium servo arm V2-Futaba 17 mm iM2
1 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x	MPX screwable clips (4 pcs)
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Civilian pilot "Gramps" size 9cm (Slimline)
2 x	EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
2 x	Pilot LA 500
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
2 x	Connectors MPX female (PIN double)
3 x	Switch Cap L (Red)
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
2 x	Servo Fork
1 x	Hacker X-Pro USB interface V2
1 x	ABS tube 10.0x8.0x1000 mm
1 x	Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm)
1 x	Screws M1,6x6 Allen
2 x	Baal link 4/14/4 (5 pcs)
1 x	Buy Perforated film 100 cm / 20 m
1 x	LED lighting system High Power
1 x	Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
2 x	Carbon fiber rod 4.0 mmx1000 mm
2 x	Buy Perforated film 145 cm / 50 m
1 x	Strip 2,0x2,0x330 mm
3 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	ASPIRE Navy ARF 2.000 mm
1 x	Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs)
3 x	Transmitter Stick Ends V1 Silver - M3 (2 pcs)
1 x	Red 3m5 mm connector holder
1 x	HITEC Power Supply 30A. Max. 540w
1 x	Suction funnel for carburetor DA70- MVVW 190cc (red)
2 x	Fresa corte diamante Ø 2.35mm (flame)
1 x	Couple M4 for wire (10 pcs)
1 x	Buy Perforated film 100 cm / 10 m
2 x	Baering 3x8x4
2 x	Tail boom
1 x	Motor mount for 1200 mm models
2 x	Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm)
1 x	1/12 Pilot "Fighter"
1 x	Rudder 2_Tray 4.5~5 inch
3 x	Screw M3x16
2 x	LA500 freewheel bearing
2 x	Side Plate
1 x	Bearings for motor HACKER C50
1 x	Refueling Cap V3 (RED)
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Glass fabric 49 g/m² (1,27 x 5 m)
1 x	LiIon Battery 3000 mAh 3.3v 15A (2 pcs)
1 x	Angle of incidence meter
1 x	Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs)
1 x	Wire easy tensioner (silver)
1 x	Red aluminium servo arm V2-Futaba 1,25" inch M3
1 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x	Suction funnel for carburetor WALBRO 20-80cc (red)
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
2 x	LA500 pre-rotation gear
1 x	Indoor motor holder
1 x	Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
2 x	Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm)
2 x	Dremel PERMAGRIT thin lime
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	Red aluminium servo arm V2-Futaba 1,0" inch M3
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
2 x	Conector BEC female (10 pcs)
1 x	Esc X-30-Pro BEC
2 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
2 x	Dremel PERMAGRIT 18 mm round lime
2 x	Head lower part
2 x	Nut M2 securing
1 x	Cierva C30 Body Spain
1 x	SE Ring 450 mm (2 pcs)
1 x	Side rudder
1 x	LED wire (green - 2pcs)
1 x	Motor DLE 55 cc
2 x	Head spacer
1 x	ABS 500 x 400 x 1 mm (white)
2 x	Steering lever
1 x	Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs)
2 x	Balls 4 mm
1 x	Compact Pitts Muffler OS MAX.35.40 FP
1 x	Raer wall
1 x	Z type of cable coupler Ø 1 (2 uds)
1 x	Medidor ángulos y/o incidencias
1 x	XH female balance (6S) connector (2 pcs)
1 x	PIN Connector female (100 pcs)
1 x	LA500 tail empennage
1 x	Blocking screws M6 gas engine
2 x	Piñon motor rotor LA-500
1 x	KIRA 500-26 6,7:1
1 x	Digital weight, angle and balance meter BASIC
1 x	Round Rod 1.0x3.5 cm
1 x	Bearing 3x6x2,5
1 x	Jeti Box mini
1 x	Heat sink for Optotronix LEDs
1 x	Cooler motor type 280
1 x	XH female balance (3S) connector (2 pcs)
1 x	Protector Connector MPX (1 pair)
1 x	Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs)
2 x	Servo Bolt M3x8 (8 pcs)
1 x	Conector JR Servo male (10 pcs)
1 x	Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	Motor Mega AC 16/25/02
1 x	Jeti Advance Pro Program Card
1 x	Motor DLE 20 cc
1 x	XH female balance (9S) connector (2 pcs)
1 x	Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm)
2 x	Fiberglass plate 350x150x2.5 mm
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x	Fabric scissors curved Premium, 16 cm / 6" length
1 x	Gold antispark 5,5 mm plug
1 x	Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm)
1 x	Motor Mega AC 16/07/12
2 x	ABS tube 8.0x7.0x1000 mm
2 x	Nut M2
1 x	Wing bolts M6 Steel screw Red (2 pcs)
1 x	Propeller diller for DLE111 and DA85-150
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Blade holder center GFK 0,5 mm
1 x	Propadapter for motor A50-V3
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Receiver replacement antenna, approx. 85
1 x	Giant Scale Muffler SLIMLINE D.A. 100 (2pcs)
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	ABS tube 14.0x10.0x1000 mm
1 x	LA500 pre-rotation gear hub
1 x	KIRA 600-20
1 x	Spinner propeller pleg. 30 mm / 5,0 mm
2 x	SE Ring 350 mm (2 pcs)
2 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	Catalog AERO-NAUT 2016
1 x	5 mm Prop Adapter M8
1 x	Battery RX JETI LiIon RB 6200 7.2v
1 x	Blade Holder (3 blades)
1 x	4 mm Prop Adapter M8
1 x	Esc X-70-SB-Pro 2-6S
2 x	Switch Cap M (blue)
2 x	Propeller diller for DLE170
1 x	DUPLEX 2.4EX RC Switch
2 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm)
1 x	Blades 330mm
2 x	ABS tube 4.0x2.0x1000 mm
1 x	Pulley brass 6/1,5 (2 pcs)
1 x	Spark Plug BRISK M14x1.25
1 x	Propeller CFK 12.5x7
1 x	Nut M1,6
3 x	LightBox SR
1 x	Threaded coupler M2 (10 uds)
1 x	A60-6XS V4 28-Pole
1 x	Propeller diller for EME35 and DLE35
1 x	Blue aluminium servo arm V2-Hitec 1,5 inch M3
1 x	CORTEX
1 x	Red aluminium servo arm V1-Futaba 17 mm M2
2 x	Turnbuckle M1,6x20/30 (2pcs)
1 x	Motor DLE 60 cc Twin
3 x	Carbon fiber rod 7.0 mmx1000 mm
2 x	Head lower part New
1 x	Rudder 2_Tray 3~3.5 inch
1 x	Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m)
1 x	Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x	Cable coupler M2x66 (2 uds)
1 x	wire tensioner (red)
1 x	28 mm tailwheel unit
2 x	Rotorshape Autogyro
1 x	Fuel Fittings-Gold
1 x	HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x	Foam plastic plates (310x210x5 mm)
1 x	KONDOR 15-92
1 x	Blue aluminium servo arm V1-Hitec 1,25" inch M3
2 x	40,0 mm hydro-propeller (left hydropropeller)
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Pull-Pull complet set with CF rudder double servo arm
1 x	Battery RX JETI LiIon RB 5200 7.2v
1 x	PYRO 700-45
1 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	JIVE 80+LV Esc
1 x	GPS Logger Dymond
1 x	Suction funnel for carburetor WALBRO 20-80cc (blue)
1 x	DYMOND VTX UBS Programming adapter
1 x	Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm)
3 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
2 x	Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x	Piloto Jet "Green" 1/6 Scale
2 x	Red aluminium servo arm V3-Futaba 1,0inch
1 x	Beech dowels 3.0 x 1000 mm
1 x	Refueling Cup V2 Red
2 x	Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm)
1 x	1/4 Pilot "Heidi"
1 x	Surface Indicator Gauge Small
1 x	Red aluminium servo arm V1-Futaba 1,25" inch M3
2 x	Bearing housing
1 x	Resistor 3W 5% OR47
1 x	Tail tube RAINBOW
1 x	KIRA 480-34 5,2:1
1 x	Transmitter Stick Ends V5 Blue - M4 JR/DX7
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
2 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Copier 5x20 cm pcs
3 x	ABS tube 5.0x4.0x1000 mm
1 x	Gear for D 54
1 x	Pilot Lotsenboot
1 x	Cable adapter iCharger
2 x	Foam plastic plates (310x210x2 mm)
1 x	Wheel keeper washer
1 x	55% silver electrodes (2 pcs)
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	Sanyo RX Battery Eneloop 6,0 V JR
1 x	Wheel 38 mm V2
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	ABS tube 4.0x3.0x1000 mm
1 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x	Cooler motor type 150
1 x	Sanyo RX Battery Eneloop 4,8 V JR
1 x	150 Newtons FEMA absorber
1 x	Remolcador "Jonny Hafenschlepper"
2 x	Rotorhead pushrod
1 x	Crimping tool
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	LA500 cyclic central part
2 x	Esc MasterSPIN 75 Pro OPTO
1 x	LED blink wire flashing (red - 2pcs)
1 x	Servo Mount S (red)
1 x	Red aluminium servo arm V3-Futaba 1,5inch M3
1 x	Servo Bolt M3x6 (8 pcs)
1 x	Fiberglass plate 620x540x0,2 mm
1 x	Fresa corte diamante Ø 2.3mm (bola)
1 x	Ball Link Plier
1 x	Sanyo RX Battery Eneloop RX 4,8 V Futaba
1 x	KIRA 480-34
1 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	Turnbuckle M2,5x32/48 (2pcs)
2 x	KIRA 400-34
1 x	Conector FUTABA Servo female (10 pcs)
1 x	Conector JR Servo male (10 pcs)
1 x	wire tensioner (black)
1 x	KOBY 90 LV Esc
2 x	20x1000 mm Ring Strap Back To Back
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
2 x	Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm)
1 x	LA500 rotor head shaft
2 x	Transmitter Balancer HITEC Aurora 9, JR and Spectrum (blue)
1 x	Sanyo RX Battery Eneloop 6,0 V FUT
1 x	Motor DLE 111 cc
2 x	Propeller hub spacer 8/5.5
1 x	Kwik link AL M4 con Clip (2 pcs)
1 x	Stickers-digit for marking
1 x	aluminium servo arm V1-JR 1,0 inch M2
1 x	Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs)
1 x	Protector Connector Dean-T (1 pair)
1 x	Spinner fixed propeller 60 mm / 5,0 mm
2 x	Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x	Pulley brass 2,5/1 (2 pcs)
2 x	Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x	LA-7 Electric Landing gear complet (CY model)
1 x	Wing conexion 2 servos Futaba 50 cm
1 x	SAVOX SH 0254 servo
1 x	Red aluminium servo arm V1-Futaba 23 mm M2
1 x	Kontronik connector (10 connectors, 5 pairs)
1 x	Fuel dot V3 (Silver)
1 x	Tail support (2 pcs)
1 x	ABS tube 6.0x5.0x1000 mm
1 x	Extra hard 250 ccm complete gasoline fuel tank
1 x	ABS tube 3.0x2.0x1000 mm
1 x	Mold plugs XT-30
1 x	Propeller CFK 12X6
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	30 cm DEANS female connector
1 x	PYRO 750-50L
1 x	Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm)
1 x	Motor Mega AC 16/25/04 COMBAT
1 x	Foam plastic plates (310x210x3 mm)
1 x	Ball joint long
1 x	Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor)
1 x	Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm)
1 x	Blue Aluminium double servo arm V3-Hitec 3-3,5inch
1 x	Tacometer mini ignition RCEXL
2 x	Decorative caps, multicoloured
1 x	Xoar Electric Beechwood Prop 22x10
1 x	Seoul Power LED 3 watts PCB Sets: 1x white, 1x red, 1x green
1 x	Tube Pitot to PIXHAWK
2 x	Propeller CFK 15.5x10
1 x	Jeti Advance Plus Program Card
1 x	Red aluminium double servo arm FUTABA 2,5inch M3
1 x	Adjustable brass horn threaded M3
1 x	KIRA 600-24 6,7:1
1 x	Quick hose connector 6-4 mm
1 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x	Cable coupler M3 (10 uds)
1 x	Propeller CFK 14x10
1 x	Ball Bearings for motor A60-V2
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	One touch canopy lock
1 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	Transmitter Stick Ends V3 Red - M3 (2 pcs)
1 x	Pilot "Dick" Legends Series (Slimline)
1 x	Propeller MENZ-S 17x6
1 x	Propeller MENZ-S 18x10
1 x	NIEUPORT XXIV ARF 1780 mm
2 x	Red aluminium servo arm V2-Futaba 2,0 inch
1 x	Spinner propeller pleg. 38 mm/6,0 mm/7º
1 x	Propeller CFK 14x8 Slim
1 x	LiPo TopFuel ECO-X 3000 mAh 3s 20C MTAG
1 x	Aluminium Hub for folding Props 37 mm M8 Shaft 5 mm
1 x	Tool for entel
1 x	LA500 rotor head core
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	Blue aluminium servo arm V3-Hitec 1,0inch M3
1 x	Nut for mounting M3 (10 pcs)
1 x	KOBY 40 LV Esc
1 x	PERMAGRIT Sanding Block 45° 140x51 mm
1 x	MVVS exhaust gasket 26cc
1 x	Resistor 3W 5% 2R2
2 x	Manometer 4 mm
1 x	Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm
2 x	LA500 ciclic lever
1 x	KIRA 400-39 5,2:1
1 x	120x60 mm SLH KOVO wheel
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
1 x	Motor Mega AC 16/25/03
2 x	Kontronik ProgUnit
1 x	double Fuel Dot V2 (silver)
1 x	Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm)
1 x	Battery LiPo GENS 450 mAh 2S 7.4V 25C (Gens Ace)
1 x	XH male balance (9S) connector (2 pcs)
2 x	Head runner
1 x	Schul-Malpinsel Gr.5
1 x	Battery plate
1 x	Propeller MENZ-S 16x10
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Cylinder ZG 26SC/SLH
1 x	quality beech plywood BIRCH 600x300x2.0 mm
1 x	KIRA 500-30 6,7:1
1 x	Sanyo TX Battery Eneloop 9,6 V Futaba
1 x	PIX Hawk with accesories
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Q-12 X-light 2000 mm Electric
2 x	Rudder
1 x	AL Axle Shaft 4.0x16 mm (2 uds)
1 x	MPX Support (2 pcs)
2 x	3,0x60 mm allen screwdriver
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Servo Dymond D 37 Eco
2 x	Propeller Pleg CAM-Prop 10x6 + Spinner
1 x	XH female balance (5S) connector (2 pcs)
1 x	Propeller MENZ-S 20x10
1 x	Connectors DEANS 4 pins (1 pair)
1 x	Savox HV Brushless Servo SB-2270SG (Swashplate)
1 x	Sparkplug Champion RCJ-7Y for ZG
1 x	Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x
1 x	Fiberglass plate 350x150x2.0 mm
1 x	Motor A50-10L Turnado V3 Glider
1 x	Conector JR Servo female (10 pcs)
1 x	Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x	SWTU2 switch
1 x	7 Servo SET 9g DS MG + Full servo extension cable set for Avanti
1 x	Piston ring for motor 58/116 cc
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	A50 Backmountset complete
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	P-47 Red (CY model)
1 x	Pulley brass 5/1,5 (2 pcs)
1 x	Coupling bush 5 - 5 mm
2 x	Esc MasterSPIN 80 Pro
1 x	Aluminium Hub "Z" for folding Props 38 mm M8 Shaft 8 mm
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Prop Shaft Adapter 6 mm/M8 "long" 35 mm
1 x	T- Fittings blue color (2pcs)
1 x	Spinner propeller pleg. 36 mm / 6,0 mm
1 x	Size "M" motor holder for class 400
1 x	Hacker A30-S Radial Set
1 x	550 cc gasoline fuel tank complet
1 x	Remote electric ignition system
1 x	Propeller MENZ-S 20x10 3 blades
1 x	TopFuel LiPo 35C-POWER-X 2400mAh 2S
1 x	Rotor Mast
1 x	Propeller MENZ-S 15x8 3 blades
1 x	A50 Motor Mount Alu complete set
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
2 x	Switch Cap M (silver)
1 x	Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm)
1 x	Double aluminium servo arm V1-Hitec 2,5 inch M3 (blue)
1 x	Connectors DEANS (T) micro
1 x	KIRA FAI 5F5/4s
1 x	A40 Backmountset complete
2 x	Wire easy tensioner (red)
1 x	280 cc gasoline fuel tank complet
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Distanzstück motor OS 120 AX
1 x	Steel Screw M1x8 (10 pcs)
1 x	Fokker D-VIII 2090 mm G/Y (CY model)
2 x	Screws flush mount M2
1 x	X-RAY Micro QR (Elevator)
1 x	Cooler motor type 300
1 x	100g Flux Paste for Silver Solder
1 x	Battery LiPo GENS 2200 mAh 4S 14.8v 25C (Gens Ace)
1 x	Gold aluminium double servo arm JR/Graupner 40 mm M3 F3A
1 x	Dean-T Plug Mold
1 x	Smoke set "S"
1 x	Head Gasket 30cc (3 pcs)
1 x	Frontal support Speed 600
1 x	Propeller CFK 16x16 Slim
1 x	Blue aluminium servo arm V2-Hitec 1,25 inch M3
1 x	Spinner propeller pleg. 42 mm / 6,0 mm
1 x	PYRO 600-11
1 x	Propeller MENZ-S 20x12 3 blades
1 x	Battery LiPo GENS 5300 mAh 2S 7.4V 30C (Gens Ace)
1 x	Extension for SensorSwitch 30cm
1 x	42 mm black plastic spinner for fixed propeller
1 x	LED blink wire flashing (green - 2pcs)
1 x	JR silicone servo wire 0,35 qmm / 5m
1 x	Prop rubber XS set 4 pieces
1 x	Programador FUTABA USB CIU-3
1 x	Gold aluminium double servo arm V3-JR 3.5 inch M3
1 x	Rubber bushing with bracket "A" type (2 pcs)
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	Connectors MPX female
1 x	Green smoke canister 140 g
1 x	ROBIN S50E RED/WHITE
1 x	Motor Mega AC 16/25/04
2 x	2.3 mm Adapter for 30 mm spinners
1 x	Battery LiPo GENS 4400 mAh 6S 22.2v 35C (Gens Ace)
1 x	Pulley brass 8/2 (2 pcs)
1 x	Spinner propeller pleg. 38 mm / 5,0 mm
1 x	Avia (Top Model)
1 x	Grub screw M3x3 shouldered (2 pcs)
1 x	ODYSSEY Horns Set GFK
1 x	Fiberglass plate 620x540x1,0 mm
1 x	FESTO connector M7 Quick 4mm 90º
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	Fascination 3600 mm, Spare Elevator (Top Model)
1 x	Hose connector stopper 4 mm
1 x	Motor Mega AC 22/30/03
1 x	Blue aluminium servo arm V1-Hitec 1,5" inch M3
1 x	Battery LiPo GENS 2600 mAh 2S 7.4v Transmitter Pack (Gens Ace)
1 x	500 ccm gasoline fuel tank
1 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	22 mm Cut Disc Proxxon/Dremmel
2 x	LA500 housing-lower cyclic
1 x	Propeller RF CFK 13x7
1 x	Foam plastic plates (310x210x8 mm)
1 x	Battery LiPo GENS 1800 mAh 4S 14.8v 25C (Gens Ace)
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 20 m
1 x	Landing gear axle Ø 6 mm (2 uds)
1 x	FUTABA F14 + R168DF + Servo S148
1 x	ABS tube 18.0x16.0x1000 mm
1 x	Support 45% Hopper JetsMunt
1 x	P-47 Electric Landing gear complet (CY model),
1 x	Propeller CFK 14x8
1 x	Combo lighting module with covering drop shape
1 x	Motor HP 220/30/A3 P4 5:1
1 x	XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell
1 x	"M" set
1 x	Esc MasterBasic 90 Opto
1 x	Wing conexion 2 servos JR/Graupner 50 cm
1 x	MPX screwable clips (5 pcs)
1 x	40 mm 1/4" Race propeller (rigth hydropropeller)
1 x	Power supply NT 25 Amp.
1 x	Check valve V2
1 x	Crystal RX 35.120 Ch 72
1 x	KIRA 480-31 5,2:1
1 x	XH 30 cm Male extension 0,25 mm2 silicone cable for 2 cell
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	Avia spare fouselage CF reinforced (Top Model)
1 x	Red aluminium servo arm V3-Futaba 1,25inch M3
1 x	DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV)
1 x	Fuel dot V3 (Red)
1 x	Gold aluminium servo arm V2-JR 1,5" inch M3
1 x	White smoke bombs AX-60 (5 pcs)
1 x	EVP Unit for AXI2208/xx and 2212/xx
1 x	LED blink wire flashing (white - 2pcs)
1 x	L ELBOW DA-150 "normal" (2 pcs)
1 x	Motor Mega AC 16/07/03
1 x	Receiver bed (Blue)
1 x	Motor Mega AC 16/15/07 COMBAT
1 x	Pick up DA50/100/150
1 x	Switch moment button, 2 functions, long FUTABA
1 x	XH male balance (2S) connector (2 pcs)
1 x	Gold aluminium servo arm V2-JR 1,0" inch M3
1 x	MYSTIQUE 2.9 m ARF
1 x	Canopy Latch
1 x	Battery LiPo GENS 5000 mAh 6S 22.2V 60C (Gens Ace)
1 x	MXS-C (Mini) Blue
1 x	Head core
1 x	Futaba 32MZ 2.4GHz + R7108SB
1 x	AX-60 starters (5 pcs)
1 x	Propeller MEJZLIK 22x10 Electric light (36 g)
1 x	Round Rod 3,0x1000 mm
1 x	ABS 500 x 400 x 2,0 mm (white)
1 x	Ferrita con funda
1 x	Bags de Luxe ASPIRE
1 x	Blue aluminium servo arm V3-Hitec 1,5inch M3
1 x	Hexagonal ball head 2.0 x 50 mm
1 x	F1 Prop Cap Can (Fuel Container Conection)
1 x	Beech dowels 4.0 x 1000 mm
1 x	Softshell Hispano Aviación
1 x	Switch Cap M (red)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Cierva C30 simulated motor
1 x	Blade Holder Full (3 blades)
1 x	Crystal RX 35.010 Ch 61
1 x	Battery FUTABA 18MZ
1 x	MULTIPLEX ALUMINUM CASE "M-LINK"
1 x	Spinner 4BL 4 blades pleg. prop 40 mm / 4,0 mm
1 x	460 mm EPP Floats
1 x	TopFuel LiPo 25C-ECO-X 900mAh 2S
1 x	16x10 tree blades propeller Master Airscrew
1 x	10 mm portholes (10 pcs)
1 x	"L" servo arm 65x49 mm (2 pcs)
1 x	25,0 mm 3-BL M4 hydro-propeller (left hydropropeller)
1 x	1000 ml sealer (DOPE)
1 x	3.2 mm Prop Adapter M8
1 x	3,2 mm Prop Adapter M8
1 x	2,3 mm Prop Adapter M6
1 x	36 mm red plastic spinner for fixed propeller
1 x	14 mm Portholes for screws (10 pcs)
1 x	3,2 mm Prop Adapter M6
1 x	12x6 tree blades propeller
2 x	250 mm / 16 mm Airbrakes
1 x	12x8 tree blades propeller
1 x	10 mm Prop Adapter M12
1 x	31,0 mm propeller (rigth propeller)
1 x	2,3 mm Prop Adapter M6
1 x	29,0 mm propeller (rigth propeller)
1 x	12 mm mast holder
1 x	33,0 mm propeller (rigth propeller)
1 x	36 mm black plastic spinner for fixed propeller
1 x	3 mm Leader (L 100 mm)
1 x	25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller)
1 x	3 mm Prop Adapter M6
1 x	36 mm white plastic spinner for fixed propeller

37,875.58EUR

Manufacturers

Bestsellers

Reviews

There are currently no product reviews

Languages

Currencies

Specials

Medidor ángulos y/o incidencias
~~52.00EUR~~
24.90EUR

Insurance