1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | One touch canopy lock |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | LA500 Blades |
1 x | Rotorhead pushrod |
1 x | Head runner |
1 x | LA500 front gear holder |
1 x | Head spacer |
1 x | Ball joint long |
1 x | Servo Fork |
1 x | Blades 330mm |
1 x | Head core |
1 x | ORACOVER Ferrari red (2 m) |
1 x | L-Connector 1.0 mm x 1000 mm |
1 x | Cooler motor type 400 |
1 x | Hobbylite Filler, Balsa colour |
1 x | Round Rod 2,0x1000 mm |
1 x | ORACOVER Fluor red (2 m) |
1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
1 x | Indoor Brushed motor kit |
1 x | Support pump Xicoy X45 |
1 x | White smoke bombs AX-18 (5 pcs) |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Round Rod 1,0x1000 mm |
1 x | Horn 6/20 with M3 Bearing |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Initior Transmitter FTX2 Wireless |
1 x | Profile ABS half cane 3x1000 mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | PVC 0,08 qmm Graupner servos wire (5 m) |
1 x | 200m servo "Premium" wire (white/red/blue) |
1 x | Round Rod 4,0x1000 mm |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | Oratex Antik 2m |
1 x | T-Connector 4.0 mm x 1000 mm |
1 x | Ferrita 14x8x5.5 mm |
1 x | Ferrita 27x14x7 mm |
1 x | Bungee HLG Premium |
1 x | 31,0 mm propeller (rigth propeller) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | 28 mm turnbuckle |
1 x | 25,0 mm 3-BL M4 hydro-propeller (left hydropropeller) |
1 x | 2,3 mm Prop Adapter M6 |
1 x | 1000 ml sealer (DOPE) |
1 x | 3.2 mm Prop Adapter M8 |
1 x | 16x10 tree blades propeller Master Airscrew |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Motor rotor LA-500 |
1 x | Head lower part |
1 x | Blade holder upper |
1 x | Raer wall |
1 x | Side rudder |
1 x | Grub screw M3x3 shouldered (2 pcs) |
1 x | Bearing 3x6x2,5 |
1 x | LA500 pilot-seat set |
1 x | Pasacables rectangular 40x15 mm (4 pcs) |
1 x | Interface Jack Adapter IKARUS |
1 x | Motor mount VANQUIST 48" F3A |
1 x | Silicone 0,35 qmm servos wire Graupner(100 m) |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | Glases Stratus |
1 x | |
1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
1 x | 5 line servos wire black (1 m) |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | Oratex Yellow Cub 10 m |
1 x | "M" set |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | 1/10 Pilot "Jimmy" |
1 x | Round Rod 3,0x1000 mm |
1 x | 500 ml sealer (DOPE) |
1 x | Z type of cable coupler Ø 1 (2 uds) |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
1 x | ORACOVER transparent Yellow (10 m) |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | 10 mm portholes (10 pcs) |
1 x | 14 mm portholes (10 pcs) |
1 x | 3 mm Prop Adapter M6 |
1 x | 12x6 tree blades propeller |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Cockpit plastic closing |
1 x | Covered closure or fairings |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Canopy Latch |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | LA500 housing-upper cyclic |
1 x | Blade holder center GFK 0,5 mm |
1 x | Head upper part |
1 x | Screw M3x16 |
1 x | Nut M2 |
1 x | Screws flush mount M2 |
1 x | Rotorshape Elevator |
1 x | LA500 tail empennage |
1 x | Battery plate |
1 x | Baal link 4/14/4 (5 pcs) |
1 x | Baering 3x8x4 |
1 x | LA500 cyclic central part |
1 x | LA500 freewheel bearing |
1 x | Piñon motor rotor LA-500 |
1 x | LA500 pre-rotation gear |
1 x | Balls 4 mm |
1 x | LA500 ciclic lever |
1 x | LA500 rotor head core |
1 x | Head core bushing |
1 x | Tail boom |
1 x | LA500 rotor head shaft |
1 x | Blade holder lower |
1 x | Steering lever |
1 x | LA500 housing-lower cyclic |
1 x | Pilot LA 500 |
1 x | LA500 pre-rotation gear hub |
1 x | Screws M1,6x6 Allen |
1 x | Nut M2 securing |
1 x | LA500 nose |
1 x | Nut M1,6 |
1 x | Motor wall |
1 x | Spray Graphit 33 |
1 x | Oratex Red Fokker 10 m |
1 x | Straightened threaded rod M2-1m |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | M2 5Diam black ball link V2 (2 pcs) |
1 x | Strip 2,0x2,0x330 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | 50m servo "Premium" wire (white/red/blue) |
1 x | Support Filtro FESTO |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | USB Mini Camera endoscope |
1 x | 1/6 Pilot "Tony" |
1 x | Horn 5/10 with M2 Bearing |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | Oracover Black 2 m |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Tapa estado carga XT-60 (6 pcs) |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Piloto Jet "Green" 1/6 Scale |
1 x | Strip 3,5x1,75x330 mm |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | Yellow smoke canister 100 g |
1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | SERVO DES 588 BB MG |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Cable Cargador FUTABA |
1 x | BALSA triangular 8x8x1000 mm |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Profile ABS half cane 2.0x1000 mm |
1 x | Ball link M2,5 (10 pcs) |
1 x | Oracover Green10 m |
1 x | Support Antena 2.4 Ghz (2 pcs) |
1 x | Threaded coupler M3 (10 uds) |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | Red smoke canister 100 g |
1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
1 x | Micro flex hinge (12 uds) |
1 x | Blue smoke canister 140 g |
1 x | "S" set for boats |
1 x | Oracover Verde 2 m |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Strip ABS 2.0x5.0x1000 mm |
1 x | 25 mm reinforced hinge |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | Angled clevis with threaded rod M3 |
1 x | Glases Flitemaster |
1 x | Piloto JET 1:3,5 |
1 x | Oracover White 2 m |
1 x | Support ECU Xicoy X-45 |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | White silicone 0,25 qmm wire (150 m) |
1 x | Support XT60 conector (2 pcs) |
1 x | Support pumb/filter Xicoy X45 |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | ABS Strip 1.5x6.0x1000 mm |
1 x | Threaded coupler M2 (10 uds) |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Oratex Natural White 2m |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | 1/6 Pilot "Garry" |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | TMM 1210-3S heli |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | Actuador lineal HLS12-100210-7.4v |
1 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | AX-60 starters (5 pcs) |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Miniature brass strap hinge, 1 m |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Landing gear retract neumatic (Jet Legend) |
1 x | Ball link M2 (10 pcs) |
1 x | Universal Colour Paste deep black 250 g |
1 x | Oratex Natural White 20m |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | PPM Encoder Module |
1 x | Carbon fiber rod 16 mm x 1000 mm |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | M3 Maxi ball link (2 uds) |
1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
1 x | Nitroverdu 500 ml |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Parachutist |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | Oracover Yellow CUB 10 m |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
1 x | 3l Smoke oil |
1 x | Piloto Jet "Red" 1/6 Scale |
1 x | 6 mm aluminium horn with patella |
1 x | Oracover CHROME 2m |
1 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | Oracover Yellow CADMIO 2 m |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Sun Cover PC 21 XXL (JMB Jets) |
1 x | ABS I Strip 20x10x1000 mm |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | PCARD Wireless System |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | 1/4 Pilot "Heidi" |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Oratex White 2m |
1 x | Nose OPTIMA 2.200 mm (Elec or Glider) |
1 x | |
1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
1 x | EVP Unit for AXI2208/xx and 2212/xx |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | Optical RPM Sensor |
1 x | 19.5x13 Falcon electric 3-Blade carbon prop (54 g) |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | ABS tube 5.0x3.0x1000 mm |
1 x | Tow hook for tug |
1 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | Vasa model Catapult |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | 2 mm Prop Adapter M6 |
1 x | 290 mm 8x4 M4 shaft ship |
1 x | 300x4 mm M4 shaft ship |
1 x | 250 mm / 16 mm Airbrakes |
1 x | 14 mm Portholes for screws (10 pcs) |
|
7,933.85EUR |