| 2 x | Canopy Lock V1 M3 Red (2 pcs) |
| 2 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 2 x | Locking cable tie 3.2x142 (uds) |
| 2 x | Screw-lock connector M2 (2 uds) |
| 2 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 2 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 2 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 4 x | Steering arm 12 mm Ø 4 mm |
| 2 x | Cockpit plastic closing |
| 1 x | Cockpit metalic closing |
| 3 x | Steering arm 16 mm Ø 4 mm |
| 2 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 2 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 1 x | Cockpit aluminium closing |
| 3 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | SUS wire 3m (nylon coated) |
| 2 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 2 x | Screw-lock connector Ø 2 mm (2 uds) |
| 2 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 2 x | Covered closure or fairings |
| 3 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 3 x | Locking cable tie 4.6x203 (uds) |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 3 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
| 1 x | One touch canopy lock |
| 1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
| 1 x | ABS tube 7.0x6.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
| 1 x | ABS tube 5.0x4.0x156 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
| 1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
| 1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
| 1 x | ABS tube 10.0x8.0x1000 mm |
| 1 x | ABS tube 3.0x1.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
| 1 x | ABS tube 4.0x3.0x1000 mm |
| 1 x | ABS tube 8.0x6.0x1000 mm |
| 1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
| 1 x | ABS tube 14.0x10.0x1000 mm |
| 1 x | ABS tube 9.0x7.0x1000 mm |
| 1 x | ABS tube 12.0x10.0x1000 mm |
| 1 x | ABS tube 3.0x2.0x1000 mm |
| 1 x | ABS tube 18.0x16.0x1000 mm |
| 1 x | Threaded coupler M2 (10 uds) |
| 1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
| 1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 1 x | Couple M4 for wire (10 pcs) |
| 1 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 1 x | Flap hinge 33x9 mm (6 pcs) |
| 1 x | Gates hinge aluminium (1 pcs) |
| 1 x | Ball Link ALU M3 - RH (1 pcs) |
| 1 x | Aluminium red ball links M3 V1 (10 pcs) |
| 1 x | Gates hinge |
| 1 x | Brass ball links BS M3 V1 (10 pcs) |
| 1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 1 x | Micro flex hinge (12 uds) |
| 1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
| 1 x | Miniature brass strap hinge, 1 m |
| 1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
| 1 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 1 x | Ball link Aluminio M3 (2 pcs) |
| 1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
| 1 x | Flap hinge (6 pcs) |
| 1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
| 1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 1 x | 18 mm reinforced hinge |
| 1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
| 1 x | Kwik link AL M3 con Clip (2 pcs) |
| 1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
| 1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
| 1 x | Angled clevis with threaded rod M3 |
| 1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
| 1 x | Gates hinge 30x16 mm (2 pcs) |
| 1 x | Pin type hinge Al 6x98 mm (2 pcs) |
| 1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
| 1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Ring 320 mm length (5 pcs) |
| 1 x | Angle of incidence meter |
| 1 x | 20x1000 mm Ring Strap Back To Back |
| 1 x | SE Ring HACKER 300 mm (2 pcs) |
| 1 x | SE Ring 200 mm (2 pcs) |
| 1 x | Propeller balancer |
| 1 x | 20x200 mm battery rings |
| 1 x | Marker ties (20 pcs) |
| 1 x | Tape GFK 50 mm |
| 1 x | Medidor ángulos y/o incidencias |
| 1 x | XH female balance (2S) connector (2 pcs) |
| 1 x | Connectors banna oro 6,0 mm (M/F) |
| 1 x | Conector BEC female (10 pcs) |
| 1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
| 1 x | XH male balance (2S) connector (2 pcs) |
| 1 x | Connectors banna oro 3,5 mm (M/F) |
| 1 x | XH female balance (5S) connector (2 pcs) |
| 1 x | Connectors banna oro 2 mm (M/F) |
| 1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
| 1 x | 30 cm DEANS female connector |
| 1 x | 2 mm female connector (2 pcs) with safety connector |
| 1 x | Conector BEC male (10 pcs) |
| 1 x | XH male balance (5S) connector (2 pcs) |
| 1 x | Connectors banna oro 0,8 mm (M/F) |
| 1 x | Wing connector 8pin with pin strip, plug & socket |
| 1 x | XH female balance (4S) connector (2 pcs) |
| 1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
| 1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
| 1 x | Gold antispark 4 mm plug |
| 1 x | Connectors banna oro 3 mm (M/F) |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | 30 cm BEC cable (male) |
| 1 x | Adapter lead MPX/EC3 |
| 1 x | CC 03 |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | CC 05 |
| 1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | CC 02 |
| 1 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 1 x | 30 cm BEC cable (female) |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | JETImodel SINGLE BEC |
| 1 x | TP/TopFuel - XH 2/3S Adapter |
| 1 x | Circlick securite |
| 1 x | CC 01 |
| 1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 2 x | Steering arm 16 mm Ø 3 mm |
| 1 x | Flat Connector 4.0 mm x 1000 mm |
| 1 x | ABS "T" angle 10.0x10.0x1000 mm |
| 1 x | Cable grommet Ø 5 mm (4 uds) |
| 2 x | 28x5 mm wires output (2 pcs) |
| 1 x | Landing gear frontal support 29x26x13,5 |
| 1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
| 1 x | Snap for floding prop for 2 mm axi |
| 1 x | Allen wheel collar M3x5 |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | U Profile ABS 5,0x10,0x1000 mm |
| 2 x | Snap short M2 (10 uds) |
| 1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
| 1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | U Profile ABS 1,0x2,0x1000 mm |
| 1 x | T-Connector 4.0 mm x 1000 mm |
| 1 x | L-Connector 1.5 mm x 1000 mm |
| 1 x | ABS angle 2,0x2,0x1000 mm |
| 1 x | 41x5,5 mm wires output (2 pcs) |
| 1 x | ABS "T" angle 6.0x6.0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
| 1 x | ABS "T" angle 4.0x4.0x1000 mm |
| 1 x | Profile ABS Square 1 x 1000 mm |
| 1 x | ABS "T" angle 8.0x8.0x1000 mm |
| 1 x | ABS angle 4,0x4,0x1000 mm |
| 1 x | Cable grommet Ø 6.4 mm (4 uds) |
| 1 x | Brass rod Ø 1.5 mm x 1000 mm |
| 1 x | Extinguisher CO2 - 2 Kg |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
| 1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
| 1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
| 1 x | Adapter 3,2 mm M6 for spinner 40 mm fixed propeller |
| 1 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
| 1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
| 1 x | Support ECU Xicoy X-45 |
| 1 x | Pushrod octagone 3/2 |
| 1 x | Allen wheel collar M3x3 |
| 1 x | Landing gear frontal support 25x32x16 |
| 1 x | Wheel collar 3.5 mm Ø (4 uds) |
| 1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
| 1 x | 11 mm Rubber pads (14 pcs) |
| 1 x | Soporte filtro FESTO (4 pcs) |
| 1 x | Pushrod greyline 4/3 with coupler M3 |
| 1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
| 1 x | ABS tube 6.0x5.0x1000 mm |
 |
| 1,771.21EUR |
