| 1 x | SIMtransmitter 6 Mode 2 |
| 2 x | Dust collector for mould cleaning |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
| 1 x | Screwdriver for Hexagon 1,27mm |
| 1 x | Z Bender - S Type Tool |
| 2 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
| 1 x | Hot Glue Stick GREEN |
| 2 x | Starter EM Gear Power 80 |
| 2 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
| 4 x | Extractor piñones 2.3/3.2 mm |
| 1 x | Starter Sullivan-STAR 601 |
| 1 x | 1,5x50 mm allen screwdriver |
| 2 x | Screwdriver for Torx® TX8 |
| 2 x | Starter 12v (Max 180 and 30ccm) |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
| 1 x | Screwdriver for Hexagon 1,5mm |
| 1 x | Crimping tool |
| 1 x | Screwdriver for Torx® TX6 |
| 2 x | |
| 2 x | Starter 12v (Max 90 and 15ccm) |
| 2 x | Disposable Injector Bags (30x16cm) 100 pcs |
| 1 x | Digital precision scale up to 2000 g |
| 1 x | Ball Link Plier |
| 2 x | 3,0x60 mm allen screwdriver |
| 2 x | Hot Glue Stick RED |
| 2 x | Hot Glue Stick BLACK |
| 1 x | Copier 5x20 cm pcs |
| 1 x | Straightened rod Ø 2.0 mm x 1000 mm |
| 1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
| 1 x | Straightened rod Ø 4.5 mm x 1000 mm |
| 1 x | Brass rod Ø 0.8 mm x 1000 mm |
| 1 x | Brass rod Ø 1.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 14.0 mm x 1000 mm |
| 1 x | Brass rod Ø 1.5 mm x 1000 mm |
| 1 x | Straightened rod Ø 1.5 mm x 1500 mm |
| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 2 x | BALSA triangular 6x6x1000 mm |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 2 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 2 x | BALSA triangular 8x8x1000 mm |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 2 x | Big-Malibu XL Roof box with surfboard rack GREY |
| 1 x | Liston HAYA 3 x 10 x 1000 mm |
| 2 x | Pine wood slat 2.0x10.0x1000 mm |
| 2 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 2 x | Pine wood slat 5.0x5.0x1000 mm |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | Pine wood slat 10x10x1000 mm |
| 1 x | SlowFlyer control horn (3 pcs) |
| 1 x | Cable control set |
| 1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
| 1 x | Horn 5/10 with M2 Bearing |
| 1 x | Horn with ball 40x30 |
| 1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
| 1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
| 1 x | Brass control horn M2 short for wire (2 pcs) |
| 1 x | Horn 20x28,5 mm (2 pcs) |
| 1 x | Horn with ball 55x40 |
| 1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
| 1 x | Cable with accesories |
| 1 x | Horn 6/35 with M3 Bearing |
| 1 x | Horn 5/20 with M2 Bearing |
| 1 x | Brass control horn M3 short for wire (2 pcs) |
| 1 x | Small aluminium horn gold (2pcs) |
| 1 x | 6 mm blue aluminium threaded horn with patella |
| 1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
| 1 x | Brass control horn M4 short for wire (4 pcs) |
| 1 x | Small aluminium horn blue (2pcs) |
| 1 x | Horn for flap control (1 pcs) |
| 2 x | Horn 6/27 with M3 Bearing |
| 1 x | Horn 13,5x16 mm (2 pcs) |
| 1 x | RH long aluminium horn (2pcs) |
| 2 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
| 1 x | 3l Smoke oil |
| 1 x | Initior Receiver FRX2 Wireless |
| 1 x | AX-60 starters (5 pcs) |
| 1 x | Ventral support for AX-18/AX-60 |
| 1 x | White smoke bombs AX-60 (5 pcs) |
| 1 x | "M" set |
| 1 x | Green smoke canister 140 g |
| 1 x | Yellow smoke canister 140 g |
| 1 x | PCARD Wireless System |
| 1 x | White smoke canister 100 g |
| 1 x | White smoke bombs AX-18 (5 pcs) |
| 1 x | Parachute expulsion foam |
| 1 x | Mixers smoke bombs AX-60 (5 pcs) |
| 1 x | Yellow smoke bombs AX-60 (5 pcs) |
| 1 x | White smoke canister 65 g |
| 1 x | Smoke set "Glider" |
| 1 x | Black smoke bombs AX-60 (5 pcs) |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | M3 Maxi ball link (2 uds) |
| 1 x | Tape GFK 38 mm |
| 1 x | PVC 0,08 qmm Graupner servos wire (5 m) |
| 1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
| 1 x | SERVO HOLDER |
| 1 x | ABS tube 4.0x3.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
| 1 x | Goma arrancador Ø36 mm x 30 mm |
| 1 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
| 1 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
| 2 x | 25 mm Sandpaper file |
| 1 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
| 1 x | Heli blades angle measurer |
| 1 x | Mini Infrared Thermomiter |
| 1 x | Mold plugs XT-30 |
| 1 x | Laminating brush 10 mm, pack/ 50 pcs |
| 2 x | Copier 2x20 cm pcs |
| 1 x | Propeller diller for EME35 and DLE35 |
| 1 x | Support Flush MPX Conector (6 pcs) |
| 1 x | Pasacables rectangular 40x15 mm (4 pcs) |
| 1 x | Propeller diller for DA50, DLE55 red |
| 1 x | Mini-handed clamp |
| 2 x | 2,0x50 mm allen screwdriver |
| 1 x | Propeller diller for DLE111 and DA85-150 |
| 1 x | Tool for entel |
| 1 x | PROXXON - DRILL SET 0,5-3,2MM (10PCS.) |
| 1 x | 2,5x60 mm allen screwdriver |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | Micro control horn T2 Ø 1 |
| 1 x | Combo lighting module with covering drop shape |
| 1 x | Brake for 140 mm wheels |
| 1 x | Heat sink for Optotronix LEDs |
| 1 x | Starter Sullivan-STAR 603 DINATRON |
| 1 x | Vacuum pump 12 CFM |
| 1 x | Resistor 3W 5% 2R2 |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | Balsa panel 1.5x100x1000 mm |
| 1 x | Glow Plug Clip 1.3 Ah |
| 1 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
| 1 x | White gelcoat 1 Kg |
| 1 x | MEKP Harderner 100 g |
| 1 x | resin-hardener package L-385 with hardener H-385 |
| 1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg |
| 1 x | ABS "T" angle 8.0x8.0x1000 mm |
| 1 x | Profile ABS half cane 2.0x1000 mm |
| 1 x | L-Connector 1.5 mm x 1000 mm |
| 1 x | Profile ABS half cane 8.0x1000 mm |
| 1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | Indoor hinge with servo arm integraded |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | Red smoke canister 140 g |
| 1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
| 1 x | Small adjustable control horn with bearing |
| 1 x | Short extra-strong control horn with bearing 2,8x15 |
| 1 x | Yellow smoke canister 100 g |
| 1 x | Red smoke canister 100 g |
| 1 x | Ball Link Plier |
| 1 x | |
| 1 x | Starter EM Gear Power 250 |
| 1 x | Medidor ángulos y/o incidencias |
 |
| 7,772.13EUR |
