2 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Covered closure or fairings |
1 x | Steering arm 16 mm Ø 3 mm |
3 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Canopy Latch |
4 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
2 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Locking cable tie 2.5x100 (uds) |
4 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
3 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Screw-lock connector M2 (2 uds) |
3 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Steering arm 16 mm Ø 4 mm |
2 x | Cockpit plastic closing |
3 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Locking cable tie 3.2x142 (uds) |
2 x | Stainless steel cable Ø 0.5 mm (20 m) |
2 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
2 x | Steering arm 16 mm Ø 4 mm (2 uds) |
2 x | Steering arm 12 mm Ø 4 mm |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
2 x | 1/10 Pilot "Jack" |
1 x | Flap hinge (6 pcs) |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
3 x | Pilot "Duke" Legends Series (Slimline) |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
2 x | Piloto jet 130 mm |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
2 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
3 x | Civilian pilot "Curt" size 9cm (Slimline) |
2 x | 1/12 Pilot "Langley" |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
2 x | 1/7 Pilot "Japanese" |
1 x | 1/12 Pilot "Fighter" |
2 x | Pilot JAN 1/4 Saiplanes |
1 x | Micro flex hinge (12 uds) |
1 x | Pilot "Goose" (Slimline) |
1 x | 1/4 Pilot "Heidi" |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | 15 mm reinforced hinge |
1 x | Long pinned hinge (12 uds) |
1 x | 25 mm reinforced hinge |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Gates hinge aluminium (1 pcs) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Banna gold connector 2,5 mm (M/F) |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Optotronix Aurora Plug |
1 x | XH female balance (4S) connector (2 pcs) |
1 x | Connectors banna oro 6,0 mm (M/F) |
1 x | XH female balance (3S) connector (2 pcs) |
1 x | Gold antispark 4 mm plug |
1 x | Field folding model stand |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | Field folding model stand SebArt |
1 x | Surface Indicator Gauge Small |
2 x | WingFix ULTRA Black Edition |
1 x | Angle measurer |
1 x | Interface Jack Adapter IKARUS |
1 x | USB HLS prog. interface |
1 x | 20 mm carbon horn |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
3 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Boxed KIT OF 7 Rotary Burrs FINE |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Tube support Ø 6mm (10 pcs) |
1 x | Support FUEL DOT V3 |
2 x | Triple rod con. 3mm Pushrod (2 pcs) |
2 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | Support Pitot JETI |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Split pin 1x8 mm (10 uds) |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Pushrod greyline 3/2 with coupler M2 |
1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Propeller balancer |
1 x | Aqua RACE 70 (without motor) |
1 x | Piloto JET 1:3,5 |
1 x | XH female balance (7S) connector (2 pcs) |
1 x | Connectors MPX male |
2 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | XT-60 connector (male) |
1 x | Wing conexion 2 servos Futaba 50 cm |
1 x | Piloto Jet "Red" 1/6 Scale |
1 x | 1/6 Pilot "Cindy" |
1 x | Pilot "Dick" Legends Series (Slimline) |
1 x | MPX PCB "4 Pins", 5 pieces |
1 x | Connectors MPX male (PIN double) |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | Pilot "Anthony" (Slimline) |
1 x | XH male balance (8S) connector (2 pcs) |
1 x | 1/6 Pilot "Tony" |
1 x | Bag connector 2 mm |
1 x | 1/10 Pilot "Jimmy" |
2 x | 1/6 Pilot "Buddy" |
2 x | SUS wire 3m (nylon coated) |
1 x | Propeller POWER-PROP 7x7 |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
2 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | 1/4 Pilot "Mike" |
1 x | One touch canopy lock |
1 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
2 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | 2 mm female connector (2 pcs) with safety connector |
2 x | MPX PCB "6 Pins", 5 pieces |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Piloto Jet "Green" 1/6 Scale |
1 x | Connectors MPX black female |
1 x | Wing conexion 2 servos JR/Graupner 50 cm |
1 x | Jeti Black cap |
1 x | Adjustable launching hook |
1 x | LOWER TOW HOOK |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | ABS tube 8.0x6.0x1000 mm |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | Towing hook |
1 x | Tip wing protector 30x10 (2 pcs) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
2 x | Aluminum Bayonet / strongal D35 mm / 1 m |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
2 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Window mounting channel 5m |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Tip wing protector 40x14 (2 pcs) |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | Wheel collar 6 mm Ø (4 uds) |
1 x | Wing bolts M3 Steel screw Red (2 pcs) |
1 x | Wing bolts M6 Steel screw Red (2 pcs) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | XTorque CFK Servohebel 38 HITEC 25T |
1 x | Hitec 38 mm servo arm |
1 x | Hitec 52 mm servo arm |
1 x | Futaba 52 mm servo arm |
1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
1 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
1 x | FUTABA 20 mm servo arm with ball link |
1 x | Hitec 30 mm servo rounded arm |
1 x | 54 mm Futaba servo arm tandem with ball link |
1 x | Horizontal mounting servo holder |
1 x | Hitec 46 mm servo arm with ball link |
1 x | Propeller MEJZLIK 9,5x3 SF Carbon Indoor |
1 x | AXI 2820/8 V2 |
1 x | AXI 2814/12 V2 Long |
1 x | Actro 32-3 Heli MAX 5mm |
1 x | Mounting frame MPX female connector |
1 x | FIALA Propeller 23x8 Electric |
1 x | 17 mm servo arm with ball link DES Graupner |
1 x | EasyFLY Addon |
1 x | AXI 2820/14 V2 |
1 x | AXI 2814/10 V2 |
1 x | Propeller MEJZLIK 20x13 Electric light (41 g) |
1 x | Combo RAY C3542-1000 + ESC 60A |
1 x | AXI 2820/14 V2 Long |
1 x | AXI 2820/8 V2 Long |
1 x | CC 11 Conector |
1 x | Frontal Adapter for AXI53xx |
1 x | IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD |
1 x | AXI 2814/10 V2 Long |
1 x | Servo NARO Max Std |
1 x | AXI 2814/16 V2 |
1 x | AXI 2808/20 V2 Long |
1 x | AXI 2814/6D V2 |
1 x | Propeller APC 13x4 Electric Pusher |
1 x | Propeller APC 10x5 Electric |
1 x | Propeller APC 10x5 Electric Pusher |
1 x | AXI 2826/10 V2 Long |
1 x | Propeller APC 12x8 Electric |
1 x | Propeller APC 12x6 Electric Pusher |
1 x | Propeller APC 11x7 SF |
1 x | Motor PERMAX BL-O 3520-920 (Extra 330 SC) |
1 x | 1/12 Pilot "Cougar" |
1 x | Protector Connector Dean-T (1 pair) |
1 x | Connectors MPX female |
1 x | Conector JR Servo male (10 pcs) |
1 x | PIN Connector female (100 pcs) |
1 x | Bearing 698-2Z for AXI 5330/xx |
1 x | Soporte carbono MR30 (2 pcs) |
1 x | PT 21x13 EL Propeller |
1 x | AXI 2820/10 V2 |
1 x | Futaba 25 mm servo arm with ball link |
1 x | SD HC 8 GB |
1 x | RX cabel |
1 x | Baseplate servo |
1 x | AXI 2204 Multicopter |
1 x | Adpater for mounting VMKG gearbox in 480 motor |
1 x | SLICK 360-A 104" (2640 mm) |
1 x | Sukhoi 29S 2,6 m White/Blue (SebART) |
1 x | Catalog AERO-NAUT 2016 |
1 x | Spinner fixed propeller 60 mm / 5,0 mm |
2 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod M3 |
2 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
1 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
1 x | Spinner fixed propeller 42 mm / 5,0 mm |
1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Cockpit aluminium closing 5.4g |
2 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
1 x | Cockpit latch closing I=10 mm |
1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Cockpit aluminium closing |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Cockpit metalic closing |
1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
1 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | Snap pin for micro clevis (10 uds) |
1 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
1 x | Pushrod octagone 4/3 |
|
9,061.81EUR |