| 1 x | Small pinned hinge (12 uds) |
| 1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
| 1 x | Flap hinge 33x9 mm (6 pcs) |
| 1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Large flex hinge (12 uds) |
| 1 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | 15 mm reinforced hinge |
| 1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 1 x | Gates hinge |
| 2 x | Miniature brass strap hinge, 1 m |
| 1 x | Fast'n EZ-CA-Hinge (12 uds) |
| 1 x | Micro flex hinge (12 uds) |
| 1 x | 18 mm reinforced hinge |
| 1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Long pinned hinge (6 uds) |
| 1 x | Gates hinge 30x16 mm (2 pcs) |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
| 1 x | Gates hinge black 30x16 mm (2 pcs) |
| 1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 1 x | Yellow smoke bombs AX-60 (5 pcs) |
| 1 x | Blue smoke canister 140 g |
| 1 x | Conector MR-60 (pareja) |
| 1 x | Yellow smoke canister 100 g |
| 1 x | Extension MPX-MPX 20 cm |
| 1 x | White smoke bombs AX-3 (10 pcs) |
| 1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
| 1 x | Red smoke bombs AX-60 (5 pcs) |
| 1 x | Parachute expulsion foam |
| 1 x | Blue smoke canister 100 g |
| 1 x | 3l Smoke oil |
| 1 x | AX-60 starters (5 pcs) |
| 2 x | Green smoke canister 65 g |
| 1 x | Smoke set "M" |
| 1 x | White smoke canister 65 g |
| 2 x | White smoke canister 140 g |
| 1 x | Starter EM Gear Power 80 |
| 1 x | Smoke set "Glider" |
| 1 x | "M" set |
| 1 x | White smoke canister 100 g |
| 1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
| 1 x | Smoke set "S" |
| 1 x | Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re |
| 3 x | White smoke bombs AX-18 (5 pcs) |
| 1 x | Green smoke canister 100 g |
| 1 x | Yellow smoke canister 65 g |
| 1 x | Ventral support for AX-18/AX-60 |
| 1 x | White smoke bombs AX-9 (10 pcs) |
| 1 x | B4-0 rocket charges (6 pcs) |
| 1 x | "S" set for boats |
| 1 x | Red smoke canister 100 g |
| 1 x | Red smoke canister 140 g |
| 1 x | Parachutist |
| 1 x | DYNAMOMETER S-1580 |
| 1 x | RH long aluminium horn (2pcs) |
| 1 x | Brass control horn M3 short for wire (2 pcs) |
| 1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
| 1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
| 1 x | Cable with accesories |
| 2 x | Small aluminium horn blue (2pcs) |
| 1 x | ABS tube 12.0x10.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
| 2 x | ABS tube 5.0x4.0x1000 mm |
| 2 x | ABS tube 14.0x10.0x1000 mm |
| 1 x | ABS tube 18.0x16.0x1000 mm |
| 2 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
| 2 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
| 1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
| 1 x | ABS tube 4.0x2.0x1000 mm |
| 1 x | ABS tube 7.0x6.0x1000 mm |
| 2 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | ABS tube 3.0x1.0x1000 mm |
| 2 x | ABS tube 10.0x8.0x1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | ABS tube 6.0x4.0x1000 mm |
| 1 x | ABS tube 5.0x4.0x156 mm |
| 1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
| 2 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
| 2 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
| 2 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
| 1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
| 1 x | ABS tube 3.0x2.0x330 mm |
| 1 x | ABS tube 16.0x14.0x1000 mm |
| 1 x | ABS tube 5.0x3.0x1000 mm |
| 2 x | ABS tube 2.0x1.0x1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | ABS tube 4.0x3.0x1000 mm |
| 1 x | CC 01 |
| 1 x | Adapter lead MPX/EC3 |
| 1 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 1 x | CC 05 |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
| 1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
| 1 x | 30 cm BEC cable (male) |
| 1 x | Tube Pitot to PIXHAWK |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Indoor hinge with servo arm integraded |
| 2 x | Mobile Terminal |
| 1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
| 1 x | AX-60 starters (5 pcs) |
| 1 x | Black smoke bombs AX-60 (5 pcs) |
| 1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
| 2 x | ABS tube 3.0x2.0x1000 mm |
| 1 x | ABS tube 9.0x8.0x1000 mm |
| 1 x | Male connector for 16 pines AWG |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
| 1 x | Rudder forward 80x28 "type Kato" |
| 1 x | EXTRA NG 74" white/red/blue (Skywing RC) |
| 1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
| 1 x | ABS tube 8.0x6.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
| 1 x | Rudder forward 70x28 "type Kato" |
| 1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
| 1 x | Crystal TX 35.050 Ch 65 |
| 1 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
| 1 x | Shaft sleeve LAMA |
| 1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Adjustable brass horn threaded M3 |
| 1 x | Radial heatsink for MPJ AC25/35-xx motor |
| 1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
| 1 x | 6 mm aluminium horn with patella |
| 1 x | LH long aluminium horn L31xH30 (2pcs) |
| 1 x | ABS tube 6.0x5.0x1000 mm |
| 1 x | Horn mando long (2 pcs) |
| 1 x | Crystal Universal RX 35.050 Ch 65 |
| 1 x | Crystal TX 35.100 Ch 70 |
| 1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
| 1 x | Indoor Brushed motor kit |
| 1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
| 1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
| 1 x | Film release agent PVA 25 ml |
| 1 x | Fiberglass plate 350x150x2.5 mm |
| 2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | PVC grid diagonal 290x185x0.32 mm |
| 1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
| 1 x | Cabel "Y" 30 cm (Futaba) |
| 1 x | Extension silicon 10 cm (Graupner) |
| 1 x | Extension silicon 100 cm (Graupner) |
| 1 x | Extension silicon 10 cm (Futaba) |
| 1 x | 200 mm extensión servo HITEC/JR |
| 1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
| 1 x | Carbon blade 230 mm |
| 1 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
| 1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
| 1 x | 6 mm blue aluminium threaded horn with patella |
| 1 x | Cooler motor type 150 |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
| 2 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
| 1 x | Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
| 1 x | ABS tube 7.0x5.0x1000 mm |
| 1 x | Coversion set HIROBO EX/EAGLE elektro |
| 1 x | Control horn long w/ball |
| 1 x | Brass control horn M2 long for wire (10pcs) |
| 1 x | Crystal Universal RX 35.170 Ch 77 |
| 1 x | Horn 6/35 with M3 Bearing |
| 1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
| 2 x | Crystal Universal RX 35.030 Ch 63 |
| 1 x | Cable control set |
| 1 x | SlowFlyer control horn (3 pcs) |
| 1 x | Cooler motor type 280 |
| 1 x | Receiver Crystal 35 Mc/s Ch 62 |
| 1 x | Small adjustable aluminium control horn with bearing 2,8x15 |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
| 1 x | 5 mm M2 variable horn |
| 2 x | Horn 5/20 with M2 Bearing |
| 1 x | Crystal RX 35.120 Ch 72 |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
| 1 x | SPS 70V 100/200 A |
| 1 x | UBEC 6A KAVAN |
| 1 x | Extension 6 lipos XH > EH |
| 1 x | Servo slow down unit (0,7-14,7 sec ) |
| 1 x | Electronic switch JETI SP6 0-15v/6A |
| 1 x | Female connector JST SH 1.0mm with 10 cm wire |
| 1 x | PowerBox SparkSwitch RS |
| 1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
| 1 x | SPARK Switch 7.4v |
| 1 x | Switc electronic 30 Amp |
| 1 x | Extension 2/3 lipos JST/C |
| 1 x | MPX-Dean "T" Adapter |
| 1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Propeller POWER-PROP 14x9 Izda |
| 1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
| 1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
| 1 x | ESC MEZON 115 Opto |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | Tren retractil ULTIMATUM 1.5 combo ER30 SEt B (ControlBox) |
| 1 x | 20-25mm Servo Arm |
| 1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
| 1 x | Wing Joiner ULTIMATUM 2.0 m |
| 1 x | Waterproof adhesive tape, width 19mm, length 25m |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
| 1 x | Battery charging cable XT60 |
| 1 x | LASER 260 60" V2 ARF Yellow (SkyWing) |
| 1 x | HOPPER tank Digitech 250 ml (Festo nipples 6 mm) |
| 1 x | DPSI magnetic switch actuator (PCB) |
| 1 x | Motor SAITO FG-61 TS |
| 1 x | Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey) |
| 1 x | Cable S.BUS 3 salidas 300 mm |
| 1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
| 1 x | Gear set HITEC HS-311/322/325BB |
| 1 x | HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program |
| 1 x | Servo HITEC HS-225 BB |
| 1 x | Mixers smoke bombs AX-60 (5 pcs) |
| 1 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
| 1 x | ABS tube 9.0x7.0x1000 mm |
| 1 x | Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish |
| 1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Carbon fibre sandwich sheet 350x150x3 mm |
| 1 x | Release film 100 cm x 50 m |
| 1 x | Glass fabric 390 g/m² (silane, twill) 100 cm x 20m |
| 1 x | Foam plastic plates (310x210x2 mm) |
| 1 x | Battery LiPo GENS 4800 mAh 5S 18.5V 18C (Gens Ace) |
| 1 x | Battery LiPo GENS 5000 mAh 6S 22.2v 45C (Gens Ace) |
| 1 x | Battery LiPo GENS 450 mAh 3S 11.1V 25C (Gens Ace) |
| 1 x | Battery LiPo GENS 3300 mAh 6S 22.2v 45C (Gens Ace) |
| 1 x | Battery LiPo GENS 5500 mAh 2S 7.6V 120C (Gens Ace Hard Case) |
| 1 x | Battery LiPo GENS 160 mAh 2S 7.4V 30C (Gens Ace) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm) |
| 1 x | KIRA FAI 5F5/4s |
| 1 x | KIRA 480-26 5,2:1 |
| 1 x | Propeller APC 11x10 Electric |
| 1 x | KIRA 480-34 5,2:1 |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm) |
| 1 x | Propeller APC 10x3,8 SF |
| 1 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
| 1 x | KIRA 600-16 |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm) |
| 1 x | KIRA 400-34 |
| 1 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
| 1 x | A50 Backmountset complete V3/V4 |
| 1 x | Backmountset complete A40 |
| 1 x | Receptor MINIMA 6S HITEC |
| 1 x | Brazo servo aluminio HITEC HS-125MG/5125MG |
 |
| 13,460.41EUR |
