| 2 x | PIX Hawk with accesories |
| 1 x | Digital Air Speed Sensor And Pitot Tube Set |
| 2 x | PPM Encoder Module |
| 1 x | Tube Pitot to PIXHAWK |
| 2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 2 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 1 x | Carbon roving DowAksa / 24k / 1600 tex |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
| 2 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
| 2 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 2 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | Copier 5x20 cm pcs |
| 1 x | Vacuum pump 12 CFM |
| 2 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
| 1 x | Screwdriver for Torx® TX8 |
| 1 x | Z Bender - S Type Tool |
| 1 x | Windsock Ozone L -1200 mm |
| 1 x | Para-RC Mix |
| 1 x | Aramid 50 daN 50 m |
| 1 x | LUCAS pilot ARTF |
| 1 x | Set cintas unión paracaídas 145 cm |
| 1 x | Paramotor BackPack XXS (without accessories) |
| 1 x | Windsock Ozone L - 700 mm |
| 2 x | Parachute BACKUP X100 |
| 1 x | Para-RC Trike "RC-Bullix" |
| 1 x | MAX pilot ARTF |
| 1 x | Paramotor Kit Camo H1.5/ Ben Red |
| 1 x | Wing OXY 0,5 pulgadas2 |
| 2 x | Paramotor Trike XL |
| 1 x | Angle of incidence meter |
| 1 x | Propeller balancer |
| 1 x | Connectors banna oro 8,0 mm (M/F) |
| 1 x | Xplorer1 anemometro |
| 1 x | M2 5Diam black ball link V2 (2 pcs) |
| 1 x | Vasa model Catapult |
| 1 x | Extension 30 cm (Futaba) |
| 1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
| 1 x | Chopped glass fibre strands 3 mm |
| 1 x | Glass fabric 49 g/m² (1,27 x 20 m) |
| 3 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 1 x | Fiberglass plate 350x150x0.3 mm |
| 1 x | Foam plastic plates (310x210x2 mm) |
| 1 x | Glass fabric 25 g (2 m²) |
| 1 x | ABS 500 x 400 x 2,0 mm (white) |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
| 1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
| 1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m |
| 1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
| 1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
| 2 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
| 1 x | Fiberglass plate 350x150x1.5 mm |
| 1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
| 1 x | Fiberglass plate 350x150x0.5 mm |
| 1 x | Carbon plate 550x350x4.0 mm ECOTECH |
| 1 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
| 1 x | Styrene plate 320x120x0.5 mm |
| 1 x | Carbon plate 550x350x3.0 mm ECOTECH |
| 1 x | Carbon plate 550x350x2.5 mm ECOTECH |
| 1 x | Carbon plate 350x150x2.0 mm |
| 1 x | Sheet Depron Aero 1250x800x3 mm |
| 1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
| 1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
| 1 x | Carbon plate 350x150x3.0 mm |
| 1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
| 1 x | Fiberglass 25 g/m² 5000x1270 mm |
| 2 x | Surface Indicator Gauge Small |
| 1 x | Propeller diller for EME35 and DLE35 |
| 1 x | Heli blades angle measurer |
| 1 x | Handle for PERMAGRIT lime |
| 1 x | Laminating brush 10 mm, pack/ 50 pcs |
| 1 x | Modelling compound (Plastilin), sculptor's quality 1 Kg |
| 2 x | Latex Gloves GRIP, size L, box/ 100 pcs |
| 1 x | Hot Glue Stick RED |
| 1 x | Propeller drill jig DA-35/50/60/70 |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 2 x | Hot Glue Stick BLACK |
| 2 x | MPX 8 pins plug mold |
| 1 x | Heli blades angle measurer |
| 2 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Propeller diller for DLE111 and DA85-150 |
| 2 x | Starter EM Gear Power 250 |
| 1 x | Ignition bed V2 Red color |
| 1 x | Starter EM Gear Power 80 |
| 1 x | Carbon fiber rod 5.0 mmx1000 mm |
| 1 x | Mobile Terminal |
| 1 x | Carbon fiber rod 0.8 mmx1000 mm |
| 1 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | Couple M4 for wire (10 pcs) |
| 1 x | Kwik link AL M4 con Clip (2 pcs) |
| 1 x | Ball link Aluminio M3 (2 pcs) |
| 1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
| 1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
| 1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
| 1 x | Parachute PV6 for F3J |
| 1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | Glass fibre sleeve Ø 20 mm X 20m |
| 1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 5m |
| 1 x | Colormatic 2K Soft fine putty white, 1 kg |
| 1 x | Electromotor starter EME 35cc |
| 1 x | Buy Perforated film 100 cm / 10 m |
| 1 x | Fiberglass plate 350x150x2.0 mm |
| 1 x | Glass fibre braided sleeve (45mm) roll 10m |
| 1 x | Fiberglass plate 350x150x4.0 mm |
| 1 x | Carbon plate 350x150x1.0 mm |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
| 1 x | Teflon rollers 80 mm x 15 mm Diam. |
| 1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
| 1 x | Fiberglass 5000x1100 mm 49 g/m² |
| 1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
| 1 x | RCEXL Electronic ignition twin CM-6 |
| 1 x | Carbon plate 350x150x1.5 mm |
| 1 x | Glass fibre braided sleeve (45mm) roll 20m |
| 1 x | Fiberglass plate 620x540x0,3 mm |
| 1 x | Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl |
| 1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
| 1 x | Teflon rollers 40 mm x 15 mm Diam. |
| 1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 10m |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
| 1 x | Carbon fiber rod 12 mm x 1000 mm |
| 1 x | Field folding model stand SebArt |
| 1 x | Starter 12v (Max 90 and 15ccm) |
| 1 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
| 1 x | Digital precision scale up to 2000 g |
| 1 x | MPX plug mold V1 |
| 1 x | Propeller Pleg CAM-Prop 10x6 + Spinner |
| 1 x | Propeller APC 14x8.5 Electric Pusher |
| 1 x | Peel ply 64 g/m² (plain weave) 150 cm x 20m |
| 1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
| 1 x | Ballast 700gr OPALE |
| 1 x | 18 mm wing servo holder |
| 1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
| 1 x | Propeller balancer |
| 1 x | Angle measurer |
| 1 x | Screwdriver for Hexagon 1,5mm |
| 1 x | Cabel charger transmitter GRAUPNER |
| 1 x | Vacuum pump P1-N |
| 1 x | Fiberglass plate 350x150x3.0 mm |
| 1 x | Starter Sullivan-STAR 601 |
| 1 x | 4 LiPo XH>EH adapter |
| 1 x | Hot Glue Stick GREEN |
| 1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
| 1 x | Mold plugs XT-90 |
 |
| 15,143.25EUR |
