| 1 x | 25 mm reinforced hinge |
| 1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 2 x | Gates hinge 30x16 mm (2 pcs) |
| 1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 2 x | Truck-trailer for gliders 720 x 285 mm |
| 1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
| 1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 2 x | Field folding model stand SebArt |
| 1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 2 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 2 x | Miniature brass strap hinge, 1 m |
| 1 x | Pin type hinge Al 6x98 mm (2 pcs) |
| 1 x | Gates hinge aluminium (1 pcs) |
| 1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 2 x | Long pinned hinge (6 uds) |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | Large flex hinge (12 uds) |
| 1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
| 1 x | Long pinned hinge (12 uds) |
| 1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 2 x | Propeller balancer |
| 1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
| 2 x | Brass rod Ø 0.8 mm x 1000 mm |
| 1 x | Straightened rod Ø 4.0 mm x 1000 mm |
| 1 x | Straightened threaded rod M3 - 1m |
| 1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
| 1 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
| 2 x | Straightened rod Ø 6.0 mm x 1000 mm |
| 1 x | Brass rod Ø 1.0 mm x 1000 mm |
| 1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
| 1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
| 2 x | Straightened rod Ø 1.5 mm x 1000 mm |
| 1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
| 1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
| 1 x | Brass rod Ø 1.5 mm x 1000 mm |
| 2 x | Round Rod 1,5x1000 mm |
| 1 x | Wing OXY 5,0 m2 |
| 2 x | ABS Strip 1.5x4.0x1000 mm |
| 2 x | ABS Strip 1.5x3.0x1000 mm |
| 2 x | Strip 2,0x2,0x330 mm |
| 1 x | Strip 1,5x1,5x330 mm |
| 2 x | ABS I Strip 20x10x1000 mm |
| 2 x | Para-RC Trike "RC-Bullix" |
| 1 x | Round Rod 1,0x1000 mm |
| 1 x | Strip 3,5x1,75x330 mm |
| 3 x | Round Rod 6,0x1000 mm |
| 1 x | Para-RC "RC-Evo-Cross" Rescue |
| 2 x | Parachute BACKUP X100 |
| 2 x | Paramotor BackPack XXS 2 |
| 2 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
| 1 x | Hot Glue Stick RED |
| 1 x | Disposable Injector Bags (30x16cm) 100 pcs |
| 2 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
| 1 x | Vacuum pump 12 CFM |
| 1 x | Starter EM Gear Power 250 |
| 1 x | Screwdriver for Hexagon 1,27mm |
| 1 x | 2,0x50 mm allen screwdriver |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
| 1 x | Copier 2x20 cm pcs |
| 1 x | Cut tube |
| 1 x | Digital precision scale up to 2000 g |
| 1 x | Hexagonal ball head 2.0 x 50 mm |
| 1 x | Digital scale up to 40 kg |
| 1 x | Starter 12v (Max 90 and 15ccm) |
| 1 x | Hot Glue Stick GREEN |
| 1 x | Screwdriver for Torx® TX6 |
| 2 x | Dust collector for mould cleaning |
| 1 x | 1,5x50 mm allen screwdriver |
| 1 x | |
| 1 x | Ball Link Plier |
| 1 x | Starter EM Gear Power 80 |
| 1 x | Ball Link Plier |
| 2 x | Crimping tool |
| 1 x | Towing hook |
| 1 x | Civilian pilot "Joe" size 9cm (Slimline) |
| 1 x | Lock washer 2.2 mm (20 pcs) |
| 1 x | Premium servo extension 50cm |
| 1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
| 1 x | LA500 nose |
| 1 x | LA500 cyclic central part |
| 1 x | Wheel keeper washer |
| 1 x | Support pump Xicoy X45 |
| 2 x | Angle of incidence meter |
| 1 x | Medidor ángulos y/o incidencias |
| 1 x | DJI FPV Combo |
| 1 x | Complet landing gear |
| 2 x | Bateria DJI Mini 2 2250 mAh |
| 1 x | TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible |
| 1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
| 1 x | Baering 3x8x4 |
| 1 x | Pasacables rectangular 40x15 mm (4 pcs) |
| 1 x | Support FUEL DOT V3 |
| 2 x | Head upper part |
| 1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 1 x | silverlot 45% - 1,50x500 mm solder rods (2 pcs) |
| 1 x | Medium pin type hinge (12 uds) |
| 1 x | Indoor hinge with servo arm integraded |
| 1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
| 1 x | Round Rod 2,0x1000 mm |
| 1 x | Futaba 38 mm servo arm with ball link |
| 1 x | SAVOX SH 0254 servo |
| 2 x | Futaba 2x20 mm servo double arm |
| 1 x | Blue aluminium servo arm V1-Hitec 20 mm M2 |
| 1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
| 1 x | ABS Strip 1.0x2.0x1000 mm |
| 1 x | Servo HITEC D-955 TW Titanium |
| 1 x | Gold aluminium servo arm V1-JR 1,25" inch M3 |
| 1 x | Straightened rod Ø 1.2 mm x 1500 mm |
| 1 x | Round Rod 2,5x1000 mm |
| 1 x | Blue aluminium servo arm V2-Hitec 1,5 inch M3 |
| 1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
| 1 x | Strip ABS 2.0x5.0x1000 mm |
| 1 x | Savox Brushless Servo SC-1251 MG |
| 2 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
| 1 x | Gear set HITEC D645 MW |
| 1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
| 1 x | ABS Strip 1.0x3.0x1000 mm |
| 1 x | Futaba 38 mm servo arm |
| 1 x | Straightened rod Ø 5.0 mm x 1000 mm |
| 1 x | Futaba 25 mm servo arm with M3 ball link |
| 1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
| 1 x | Futaba 54 mm servo arm with ball link |
| 1 x | Servo MKS HBL380 |
| 1 x | Servo BLS-M55B 61.2kg |
| 1 x | Straightened rod Ø 1.5 mm x 1500 mm |
| 1 x | Servo HITEC D950 TW |
| 1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
| 1 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
| 1 x | Futaba 30 mm servo arm with M3 ball link |
| 1 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
| 1 x | Straightened rod Ø 2.0 mm x 1000 mm |
| 1 x | ABS Strip 1.5x2.0x1000 mm |
| 1 x | Servo MKS HV1220 |
| 1 x | Servo SAVOX SV-1270 TG |
| 1 x | Gold aluminium servo arm V2-JR 1,0" inch M3 |
| 1 x | Servoarm Aluminium SH-82 |
| 1 x | ABS Strip 1.5x8.0x1000 mm |
| 1 x | Servo DITEX TD2612S |
| 1 x | ABS Strip 1.0x5.0x1000 mm |
| 1 x | Rudder tandem for two Futaba servos |
| 1 x | HITEC 17 mm servo arm with ball link HITEC |
| 1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
| 1 x | Hitec 38 mm servo arm |
| 1 x | Red aluminium servo arm V2-Futaba 1,0" inch M3 |
| 1 x | Adapter rotula M3 |
| 1 x | Gear set HITEC HS-225 |
| 1 x | Horizontal servo holder |
| 1 x | SAVOX SH 0255 MG servo |
| 1 x | Servo SAVOX SV-0236 MG HV |
| 1 x | Futaba 20 mm servo arm |
| 1 x | Blue aluminium servo arm V3-Hitec 1,25inch M3 |
| 1 x | Strip ABS 2.0x10.0x1000 mm |
| 1 x | ABS Strip 1.0x4.0x1000 mm |
| 1 x | Brazo servo MKS Metal M3-L:30 (2 pcs) |
| 1 x | ABS I Strip 10x5x1000 mm |
| 1 x | Futaba 17 mm servo arm with ball link HITEC |
| 1 x | Gear set HITEC HS-311/322/325BB |
| 1 x | Servo SAVOX SA-128S SG |
| 1 x | Servo HITEC HS-225 BB |
| 1 x | Round Rod 4,0x1000 mm |
| 1 x | Straightened rod Ø 14.0 mm x 1000 mm |
| 2 x | MPX 8 pins plug mold |
| 1 x | Kwik link unmount tool |
| 1 x | ALU servo arm 90º 3 mm shaft |
| 1 x | Vacuum pump P1-N |
| 1 x | Starter Sullivan-STAR 601 |
| 1 x | Extinguisher CO2 - 2 Kg |
| 1 x | ESC ALPHA 60A HV |
| 1 x | Fuselage Autogyro RAINBOW |
| 1 x | Metalic nose for PROJETI |
| 1 x | V tail SILENT DREAM 2.200 mm (Elec or Glider) |
| 1 x | P 17×5.8 Prop-2PCS/PAIR |
| 1 x | Support conector MPX (6 pcs) |
| 1 x | Cierva C30 Elevator |
| 1 x | 3,9 mm ZG20-ZG38 servo arm |
| 2 x | Blade holder upper |
| 1 x | Blades 330mm |
| 1 x | 89 mm double servo arm with bearing (2 pcs) |
| 1 x | 50 mm servo arm with bearing (2 pcs) |
| 1 x | Soporte grifo FESTO vertical (1 pcs) |
| 1 x | Surface Indicator Gauge Small |
| 1 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 1 x | 18 mm reinforced hinge |
| 1 x | Screw M3x16 |
| 1 x | Head lower part New |
| 1 x | Blade holder center |
| 1 x | Cierva C30 simulated motor |
| 1 x | Nut M1,6 |
| 1 x | Steering lever |
| 1 x | Screws flush mount M2 |
| 1 x | 4 LiPo XH>EH adapter |
| 1 x | 3,2x1000 mm 2:1 black termoretract tube |
| 1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
| 1 x | Servo SAVOX SA-1258 TG |
| 1 x | Propeller 10x4,7 SlowFlyer |
| 1 x | Servo SAVOX SB-2290 SG |
| 1 x | Servo RHINO pro SHV digi 4 |
| 1 x | Tachometer Hyperion Multi-pala |
| 1 x | Tool for entel |
| 1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
| 1 x | Propeller APC 11x5.5 Electric Pusher |
| 1 x | Servo HITEC HS-5087 MH |
| 1 x | Servo HITEC D941 TW |
| 1 x | Servo GO-1017MG 4.5 kg.cm 0.10s/60º |
| 1 x | Propeller MENZ-S 19x12 |
| 1 x | Motor B40-10 L |
| 1 x | Servo arm with 6 mm hole to FEMA 9800A |
| 1 x | Axle for motor A30-XL V2 |
| 1 x | DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301) |
| 1 x | Propeller MENZ-S 18x10 |
| 1 x | Propeller diller for DLE170 |
| 1 x | 40 mm servo arm with bearing (2 pcs) |
| 1 x | UMS radial-engine, 7 cylinder 160ccm, gas |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Motor Mount for TITAN ZG38/38S/38SC, length 36 mm |
| 1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | 30 cm BEC cable (female) |
 |
| 14,676.80EUR |
