| 1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
| 1 x | Carbon fiber rod 20 mmx1000 mm |
| 1 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | Carbon fiber rod 2.5 mmx1000 mm |
| 1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
| 1 x | Carbon fiber rod 7.0 mmx1000 mm |
| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | Carbon fiber rod 2.0 mmx1000 mm |
| 1 x | Squared carbon wing joinner 5x5x220 mm |
| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | Carbon fiber rod 12 mm x 1000 mm |
| 1 x | Carbon fiber rod 14 mmx1000 mm |
| 1 x | Carbon fiber rod 6.0 mmx1000 mm |
| 1 x | Carbon fiber rod 8.0 mmx1000 mm |
| 1 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 1 x | Carbon fiber rod 10 mm x 1000 mm |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Pine wood slat 5.0x5.0x1000 mm |
| 1 x | BALSA triangular 6x6x1000 mm |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 2 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | Pine wood slat 3.0x5.0x1000 mm |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 2 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 2 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 2 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 1 x | Rescue 1,8m2 / BackPack |
| 1 x | Parachute PV6 for F3J |
| 1 x | Trike XL motor set (motor+esc+prop) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | Parachute BACKUP X100 |
| 2 x | Hot Glue Stick BLACK |
| 1 x | Starter 12v (Max 180 and 30ccm) |
| 1 x | Paramotor Kit Camo H1.5/ Ben Red |
| 2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 1 x | Cut tube |
| 1 x | Ball Link Plier |
| 1 x | MAX pilot ARTF |
| 2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 2 x | Para-RC Mix |
| 1 x | Starter Sullivan-STAR 601 |
| 1 x | Wing OXY 5,0 m2 |
| 1 x | Wing OXY 0,5 pulgadas2 |
| 1 x | Paramotor BackPack XXS (without accessories) |
| 1 x | 2,5x60 mm allen screwdriver |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 1 x | Crimping tool |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Vacuum pump 12 CFM |
| 1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
| 1 x | Para-RC Trike "RC-Bullix" |
| 2 x | 3,0x60 mm allen screwdriver |
| 1 x | Paramotor BackPack XXS 2 |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | |
| 2 x | Hot Glue Stick RED |
| 1 x | Ball Link Plier |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | Starter 12v (Max 90 and 15ccm) |
| 1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
| 1 x | Starter EM Gear Power 80 |
| 1 x | Para-RC "RC-Evo-Cross" Rescue |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | Set cintas unión paracaídas 145 cm |
| 1 x | Opale Rucksack |
| 1 x | Screwdriver for Torx® TX8 |
| 1 x | Disposable Injector Bags (30x16cm) 100 pcs |
| 1 x | Z Bender - S Type Tool |
| 1 x | Z Bender - S Type Tool |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 1 x | 1,5x50 mm allen screwdriver |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | Digital precision scale up to 2000 g |
| 1 x | Ballast 700gr OPALE |
| 1 x | Digital scale up to 40 kg |
| 2 x | |
| 1 x | Motor A2212/13T |
| 1 x | Motor DLE 200cc Std |
| 1 x | Motor DLE 170 M- Paramotors |
| 1 x | Oracover light Grey 2m |
| 1 x | Carbon fiber rod 1.0 mm x 1000 mm |
| 1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
| 1 x | USB HLS prog. interface |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | Xplorer2 anemometro |
| 1 x | Pasacables rectangular 40x15 mm (4 pcs) |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | A/C quality beech plywood 1520x750x4.0 mm |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | Balsa panel 1.0x100x1000 mm |
| 1 x | Balsa panel 10x100x1000 mm |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | HV6150 Digital Servo |
| 1 x | Futaba 30 mm servo arm with M3 ball link |
| 1 x | HITEC 20 mm servo arm with ball link |
| 1 x | Servo MKS HBL380 |
| 1 x | Futaba 30 mm servo rounded arm |
| 1 x | Hitec 46 mm servo arm with ball link |
| 1 x | Motor DLE 430 cc - Paramotors |
| 1 x | PVC grid diagonal 290x185x0.32 mm |
| 1 x | Metal gear set for HS81MG/5082MG |
| 1 x | Servo MKS HV1220 |
| 1 x | Horizontal servo holder |
| 1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
| 1 x | Hitec 30 mm servo rounded arm |
| 1 x | Servo AN-8 HBA |
| 1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
| 1 x | Adapter rotula M3 |
| 1 x | Blue aluminium servo arm V3-Hitec 1,25inch M3 |
| 1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
| 1 x | Red aluminium servo arm V2-Futaba 1,75" inch M3 |
| 2 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | Gear for D 200 BX |
| 1 x | Blue aluminium servo arm V3-Hitec 1,0inch M3 |
| 1 x | Red aluminium servo arm V2-Futaba 17 mm iM2 |
| 1 x | 40 mm servo arm with bearing (2 pcs) |
| 1 x | Blue aluminium servo arm V2-Hitec 2,0 inch M3 |
| 1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
| 1 x | CA Glue fast 20g |
| 1 x | Blue aluminium servo arm V2-Hitec 1,25 inch M3 |
| 1 x | aluminium servo arm V1-JR 1,0 inch M2 |
| 1 x | Carbon fiber flat 1000x6.0x0.8 mm |
| 1 x | Double aluminium servo arm V1-Hitec 2,5 inch M3 (blue) |
| 1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
| 1 x | Carbon fiber rod 1.5 mm x 2000 mm |
| 1 x | Red aluminium double servo arm FUTABA 2,5inch M3 |
| 1 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
| 1 x | Gold aluminium servo arm V2-JR 1,5" inch M3 |
| 1 x | Blue aluminium servo arm V2-Hitec 1,75" inch M3 |
| 1 x | Gold aluminium servo arm V1-JR 1,25" inch M3 |
| 1 x | FOAM - CURE™ (24g) |
| 1 x | UHU hart 35 g |
| 1 x | Cabel "Y" 15 cm |
| 1 x | Extension silicon 10 cm (Futaba) |
| 1 x | Extension 15 cm (Futaba) |
| 1 x | Extension silicon 25 cm (Graupner) |
| 1 x | Pegamento Pu R 50g polyuretano |
| 1 x | Extension silicon 75 cm (Graupner) |
| 1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
| 1 x | 200 mm extensión servo HITEC/JR |
| 1 x | Extension silicon 30 cm male (Graupner) |
| 1 x | Circlick securite |
| 1 x | Prolongador S-Bus JR/JR 10cm |
| 1 x | Extension PVC 150 cm (Graupner) |
| 1 x | Extension silicon 35 cm male (Futaba) |
| 1 x | Prolongador S-Bus JR/JR 20cm |
| 1 x | Extension silicon 30 cm female (Graupner) |
| 1 x | Flat Connector 4.0 mm x 1000 mm |
| 1 x | ABS "T" angle 8.0x8.0x1000 mm |
| 1 x | ABS angle 1.5x1.5x1000 mm |
| 1 x | L-Connector 1.0 mm x 1000 mm |
| 1 x | ABS "T" angle 2.0x2.0x1000 mm |
| 1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
| 1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
| 1 x | Glass fabric 425 g/m² aero,10x1m |
| 1 x | Tube bender |
| 1 x | ABS 500 x 400 x 1,5 mm (white) |
 |
| 19,882.04EUR |
