| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 5 m |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
| 1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
| 1 x | CA Glue fast 20g |
| 1 x | Carbon Non-Woven, 240 g/m² 100 cm x 2m |
| 1 x | Buy Perforated film 145 cm / 50 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 2 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 2 x | Carbon fiber flat 1000x6.0x0.8 mm |
| 1 x | Buy Perforated film 100 cm / 10 m |
| 1 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
| 1 x | Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
| 1 x | Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm) |
| 1 x | Carbon fiber rod 2.0 mmx1000 mm |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
| 1 x | Carbon tube (L 2000 mm, Ø16 mm, Ø14 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm) |
| 1 x | Carbon fiber rod 1.5 mm x 2000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
| 1 x | Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm) |
| 2 x | Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm) |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 2 x | Epoxy L 40 min. 10 kg (Resin) |
| 1 x | Epoxy Resin L + Hardener L (40 min) 3.5 Kg (2.5 kg Resin L + 1 k |
| 1 x | Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
| 2 x | Balls 4 mm |
| 2 x | Cierva C30 simulated motor |
| 4 x | Nut M1,6 |
| 4 x | Screws flush mount M2 |
| 2 x | Baering 3x8x4 |
| 1 x | LA500 pre-rotation gear |
| 1 x | Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain) |
| 1 x | Epoxy Resin L + Hardener GL 1 (30 min) |
| 1 x | Glass fabric 49 g/m² (1,27 x 20 m) |
| 1 x | Buy Perforated film 100 cm / 50 m |
| 1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m |
| 1 x | Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain) |
| 1 x | Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min) |
| 1 x | Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l) |
| 1 x | Glass fabric 390 g/m² aero,10x1m |
| 1 x | Fibra vidrio 25g 110 cm/ 20m (Interglass 02034, finish FE800 pl |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
| 1 x | Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish |
| 1 x | Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs |
| 1 x | Glass fibre sleeve Ø 20 mm X 20m |
| 1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
| 1 x | Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg |
| 1 x | Glass fabric 49 g/m² (1,27 x 10 m) |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | ABS Strip 1.0x5.0x1000 mm |
| 1 x | ABS Strip 1.5x4.0x1000 mm |
| 1 x | Starter EM Gear Power 80 |
| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | CA Glue (medium) 20g |
| 1 x | Copier 5x20 cm pcs |
| 2 x | Cyanocrylate MD GA460 odourless 20g |
| 1 x | ABS angle 5,0x5,0x1000 mm |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | Dust collector for mould cleaning |
| 1 x | Disposable Injector Bags (30x16cm) 100 pcs |
| 1 x | Tape GFK 25 mm |
| 1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
| 1 x | ABS tube 8.0x6.0x1000 mm |
| 1 x | ABS tube 3.0x1.0x1000 mm |
| 1 x | SE Ring 330 mm (4 pcs) |
| 1 x | Cable S.BUS 3 salidas 300 mm |
| 1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
| 1 x | Straightened rod Ø 8.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 0.5 mm x 1000 mm |
| 1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
| 1 x | Premium servo extension 75cm |
| 1 x | Straightened threaded rod M2-1m |
| 1 x | 1/6 Pilot "Buddy" |
| 1 x | Tape GFK 50 mm |
| 1 x | Extension 30 cm (Futaba) |
| 1 x | 1/10 Pilot "Jimmy" |
| 1 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
| 1 x | Extension lead 15 cm Multiplex |
| 1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
| 1 x | 1/6 Pilot "Tony" |
| 1 x | Pilot "Duke" Legends Series (Slimline) |
| 1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
| 1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
| 1 x | ABS tube 10.0x8.0x1000 mm |
| 1 x | Straightened rod Ø 0.8 mm x 1000 mm |
| 1 x | Straightened rod Ø 4.0 mm x 1000 mm |
| 1 x | Pilot "Anthony" (Slimline) |
| 1 x | Straightened rod Ø 5.5 mm x 1000 mm |
| 1 x | Premium servo extension 100cm |
| 1 x | Foil for sticking flaps and ailerons |
| 1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
| 1 x | ABS tube 3.0x2.0x330 mm |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | ABS tube 12.0x10.0x1000 mm |
| 1 x | 1/12 Pilot "Fighter" |
| 1 x | Straightened rod Ø 4.5 mm x 1000 mm |
| 1 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | Extension silicon 30 cm female (Graupner) |
| 1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
| 1 x | Straightened rod Ø 6.0 mm x 1000 mm |
| 1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
| 1 x | ABS tube 7.0x5.0x1000 mm |
| 1 x | ABS tube 3.0x2.0x1000 mm |
| 1 x | 1/7 Pilot "Japanese" |
| 1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
| 2 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
| 1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | |
| 1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
| 1 x | Universal Colour Paste deep black 250 g |
| 1 x | Universal Colour Paste deep black 50 g |
| 1 x | Glass fibre sleeve Ø 20 mm |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
| 1 x | Release wax 250ml |
| 1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
| 3 x | Nut M2 |
| 2 x | Grub screw M3x3 shouldered (2 pcs) |
| 1 x | Motor wall |
| 2 x | Screws M1,6x6 Allen |
| 3 x | Nut M2 securing |
| 3 x | Head core |
| 3 x | Head spacer |
| 1 x | Blade Holder Full (3 blades) |
| 2 x | Rudder |
| 3 x | Head lower part |
| 2 x | Blade holder lower |
| 2 x | Head runner |
| 1 x | Rotor Mast |
| 1 x | Tail boom |
| 1 x | Side rudder |
| 1 x | Battery plate |
| 3 x | Head upper part |
| 2 x | Blade holder center |
| 2 x | Blades 330mm |
| 2 x | Tail support (2 pcs) |
| 1 x | Washer 2.2×4 |
| 2 x | Side Plate |
| 1 x | Bearing housing |
| 2 x | Servo Fork |
| 3 x | Ball joint long |
| 2 x | Bearing 3x6x2,5 |
| 2 x | Blade holder center GFK 0,5 mm |
| 1 x | Fuselage Autogyro RAINBOW |
| 1 x | Head core bushing |
| 2 x | Steering lever |
| 2 x | Rotorhead pushrod |
| 1 x | Raer wall |
| 1 x | Blade holder upper |
| 1 x | Complet landing gear |
| 1 x | Screw M3x16 |
| 1 x | Blade Holder (3 blades) |
| 1 x | 4 blades set |
| 1 x | Blade Holder Full (4 blades) |
| 1 x | Tail tube RAINBOW |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
| 1 x | 50 mm servo arm with bearing (2 pcs) |
| 1 x | Futaba 25 mm servo arm with ball link |
| 1 x | Futaba 17 mm servo arm with ball link HITEC |
| 1 x | Tool for entel |
| 1 x | Legs + electric brakes for Viper Jet 90 |
| 1 x | 17 mm servo arm with ball link DES Graupner |
| 1 x | Futaba 38 mm servo arm with ball link |
| 1 x | Servo holder for retract |
| 1 x | Z-shaped servo mount |
 |
| 7,512.45EUR |
