| 2 x | PIX Hawk with accesories |
| 2 x | PPM Encoder Module |
| 1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
| 1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
| 1 x | Xplorer3 anemometro |
| 1 x | Carbon fiber flat 1000x6.0x0.8 mm |
| 1 x | Carbon fiber rod 16 mm x 1000 mm |
| 1 x | Carbon fiber rod 20 mmx1000 mm |
| 3 x | Carbon fiber rod 10 mm x 1000 mm |
| 2 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
| 2 x | Carbon fiber rod 8.0 mmx1000 mm |
| 1 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Locking cable tie 4.6x203 (uds) |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 1 x | One touch canopy lock |
| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Ball link M2 (10 pcs) |
| 1 x | Blue metalic ball link M3/3 azul (2 pcs) |
| 1 x | Ball link M1.6 (6 uds) |
| 1 x | Joint with bearing M2,5 22x5,5 |
| 1 x | Socket head long ball link M3 (2 uds) |
| 1 x | M3 INDUSTRIAL ball link (2 uds) |
| 2 x | M2,5 5Diam short black ball link V2 (2 pcs) |
| 1 x | Short ball link M1.6 (6 uds) |
| 1 x | Long ball link M1.6 (6 uds) |
| 1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
| 1 x | M2,5 Diam metal ball link V3 (2 pcs) |
| 1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
| 1 x | Socket head ball link M3 (2 uds) |
| 1 x | Ball link M3 (6 uds) |
| 1 x | M3 Maxi ball link (2 uds) |
| 1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
| 1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
| 1 x | Ball link M3 (10 pcs, flat ball) |
| 1 x | M3 Maxi ball link (2 uds) |
| 1 x | Socket head ball link M3 (2 uds) |
| 1 x | Socket head long ball link M3 (6 uds) |
| 1 x | 30 cm BEC cable (female) |
| 1 x | CC 01 |
| 2 x | Ballast 700gr OPALE |
| 1 x | BEC 3A FOXY |
| 1 x | Adapter lead MPX/EC3 |
| 1 x | TP/TopFuel - XH 2/3S Adapter |
| 1 x | Paramotor Trike XL |
| 1 x | Paramotor BackPack XXS 2 |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | TrainerCord (master-learner) |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 2 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | Windsock Ozone L - 700 mm |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | Parachute P4 |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | Wing OXY 5,0 m2 |
| 1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
| 1 x | CC 03 |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 2 x | Dean "T" - Futaba Adapter |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | 30 cm BEC cable (male) |
| 1 x | Para-RC Trike "RC-Bullix" |
| 1 x | USB HLS prog. interface |
| 1 x | Cabel charger transmitter GRAUPNER |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | CC 05 |
| 1 x | Para-RC Mix |
| 1 x | Opale Rucksack |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | JETImodel SINGLE BEC |
| 1 x | Circlick securite |
| 2 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 2 x | Rescue 1,8m2 / BackPack |
| 1 x | MAX pilot ARTF |
| 1 x | Paramotor Kit Camo H1.5/ Ben Red |
| 1 x | Parachute BACKUP X100 |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | Aramid 50 daN 50 m |
| 2 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Nitroverdu 500 ml |
| 1 x | 1/4 Pilot "Mike" |
| 1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | |
| 1 x | Protective Cover for wires Ø 6 mm 1000 mm |
| 1 x | Xplorer2 anemometro |
| 2 x | Xplorer4 anemometro |
| 1 x | Xplorer1 anemometro |
| 1 x | Male connector for 12 pines AWG |
| 2 x | Carbon fiber rod 4.0 mmx1000 mm |
| 1 x | Carbon fiber flat 1000x3.0x0.13 mm |
| 2 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
| 1 x | Carbon fiber rod 12 mm x 1000 mm |
| 1 x | Carbon fiber rod 1.0 mm x 1000 mm |
| 1 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 1 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 1 x | Carbon fiber rod 0.8 mmx1000 mm |
| 1 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | Switch Cap L (Red) |
| 1 x | Neck strap Double V2 |
| 1 x | Switch Cap M (blue) |
| 1 x | Black 2,4 GHz antenna exit guides (2 pcs) |
| 1 x | Sparkplug 1/4-32 |
| 1 x | Switch moment button, 2 functions, long FUTABA |
| 1 x | White smoke canister 100 g |
| 1 x | Initior Receiver FRX2 Wireless |
| 1 x | White smoke bombs AX-3 (10 pcs) |
| 1 x | Prop Shaft Adapter 5 mm/M8 "long" |
| 1 x | SCHARNHORST accessories |
| 1 x | Stick coupler Ms 15 mm |
| 1 x | Futaba S-Bus Rx/Gyro Link Lead |
| 1 x | Sparkplug Saito 400 |
| 1 x | Transmitter Balancer Futaba V |
| 1 x | Sparkplug DLE CM6 |
| 1 x | Sparkplug NGK CM6 |
| 1 x | Spark motor OS Type F |
| 1 x | Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA) |
| 1 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 1 x | SBEC Jeti |
| 1 x | M3/5Diam metal ball link V3 (2 pcs) |
| 1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
| 1 x | M2 5Diam black ball link V2 (2 pcs) |
| 1 x | Joint with bearing M3 22x5,5 |
| 1 x | Three-position switched channel, short |
| 1 x | Male connector for 10 pines AWG |
| 1 x | Hacker X-Pro USB interface V2 |
| 1 x | Female connector for 6 pines AWG |
| 1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
| 1 x | DPSI Ampere battery backer |
| 1 x | Motor B20-10 L + 4:1 gearbox |
| 1 x | Motor A50-12 L Glider |
| 1 x | Motor A20-20 L EVO |
| 1 x | Axle for motor A20-S (3 uds) |
| 1 x | T-Motor U7-V2.0 Kv420 |
| 1 x | Propeller Pleg CAM Carbon 14x8 |
| 1 x | Motor A30-10 XL V4 |
| 1 x | A60-6XS V4 28-Pole |
| 1 x | Motor A30-14 M V2 6 Poles |
| 1 x | Motor A50-14 L 8-Polos Electric turbine |
| 1 x | A50 Backmountset complete |
| 1 x | Motor A60-6XS V4 28-pole kv370 |
| 1 x | Motor A200-6 |
| 1 x | A50 Backmountset complete |
| 1 x | Motor A20-26 M EVO |
| 1 x | Motor A40-10 L V2 14-Pole Glider |
| 1 x | Motor A40-14 L 14-Pole V4 |
| 1 x | Axle for motor A30-XL V2 |
| 1 x | A50 Backmountset complete V3/V4 |
| 1 x | A30-M/L/XL Backmountset complete |
| 1 x | Motor A50-14L Turnado V3 Glider |
| 1 x | Motor A30-14 L V4 |
| 1 x | A40 Backmountset complete |
| 1 x | Motor A20-22 L EVO |
| 1 x | Motor A50-10L Turnado V3 Glider |
| 1 x | Motor B20-18 L + 4:1 gearbox |
| 1 x | Motor A10-7 L 4,4:1 |
| 1 x | Motor A40-10S V4 14-Pole |
| 1 x | Backmountset complete A40 |
| 1 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
| 1 x | Surface Indicator Gauge Small |
| 1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
| 1 x | Propeller Pleg CAM Carbon 13x8 |
| 1 x | Propeller Pleg CAM Carbon 11x8 |
| 1 x | Propeller Pleg CAM Carbon 12x6.5 |
| 1 x | Propeller Pleg CAM Carbon 11x10 |
| 1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
| 1 x | Propeller Pleg CAM Carbon 15x13 |
| 1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
 |
| 11,346.68EUR |
