| 1 x | Motor DLE 200cc Std |
| 1 x | ABS tube 10.0x8.0x1000 mm |
| 1 x | ABS tube 7.0x6.0x1000 mm |
| 1 x | ABS tube 2.0x1.0x1000 mm |
| 1 x | ABS tube 6.0x4.0x1000 mm |
| 1 x | Connector Sub-D 2+5 Female |
| 1 x | CC 03 |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | Balsa panel 1.0x100x1000 mm |
| 1 x | Profile ABS half cane 4x2.5x1000 mm |
| 2 x | XCALIBUR Fuel Tank with built in UAT |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | CC 02 |
| 1 x | Profile ABS half cane 6.0x1000 mm |
| 2 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Profile ABS half cane 2.5x1000 mm |
| 2 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 2 x | Bec MR UBEC 5A (5v/6v/7v) |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | Piloto Jet "Green" 1/6 Scale |
| 1 x | 1/7 Pilot "Japanese" |
| 1 x | Cable grommet Ø 4 mm (4 uds) |
| 1 x | AX-60 starters (5 pcs) |
| 1 x | Blue smoke canister 100 g |
| 1 x | White smoke bombs AX-9 (10 pcs) |
| 1 x | White smoke bombs AX-3 (10 pcs) |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | 1/6 Pilot "Cindy" |
| 1 x | Piloto Jet "Red" 1/6 Scale |
| 1 x | Allen wheel collar M3x3 |
| 1 x | Red smoke canister 65 g |
| 1 x | Ring 320 mm length (5 pcs) |
| 1 x | Tape GFK 50 mm |
| 1 x | 200 mm extensión servo HITEC/JR |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Extension 90 cm (Futaba) |
| 2 x | SE Ring 350 mm (2 pcs) |
| 1 x | Extension silicon 75 cm (Graupner) |
| 1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
| 1 x | 800TVL CMOS camera for FPV |
| 1 x | Extension silicon 30 cm female (Futaba) |
| 1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
| 1 x | SE Ring 200 mm (2 pcs) |
| 1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
| 1 x | Extension silicon 30 cm female (Graupner) |
| 1 x | SE Ring 450 mm (2 pcs) |
| 1 x | |
| 1 x | Extension silicon 100 cm (Graupner) |
| 1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
| 1 x | Truck-trailer for gliders 720 x 239 mm |
| 1 x | Waterproof adhesive tape, width 19mm, length 25m |
| 1 x | Extension silicon 50 cm (Graupner) |
| 1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
| 1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
| 1 x | FOX ARF 2000 mm Red (Hacker Model) |
| 1 x | 700 ml complete glow fuel tank |
| 3 x | Battery bed V2_M (black) |
| 2 x | Ventus 1:4 set of instruments |
| 1 x | Birch plywood plate 600x300x1.2 mm |
| 1 x | Pine wood slat 10x10x1000 mm |
| 1 x | Birch plywood plate 600x300x2.5 mm |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | 20x1000 mm Ring Strap Back To Back |
| 1 x | SE Ring 330 mm (4 pcs) |
| 1 x | SE Ring 360 mm (2 pcs) |
| 1 x | Plastic caps for AIR BURTS (30 pcs) |
| 1 x | Sanyo RX Battery Eneloop 6,0 V JR |
| 1 x | Battery Protection Circuit Board 22.2v 6s |
| 2 x | LiPo Storage Box Type "P" |
| 1 x | Sanyo RX Battery Eneloop 4,8 V JR |
| 1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
| 2 x | RX Battery Eneloop 4,8 V JR 2500 mAh |
| 1 x | Sanyo Eneloop AA 1,2 V 2400 mAh battery |
| 2 x | Battery bed V2_S (black) |
| 1 x | LiPo Storage Box Standard 1 Type 1 |
| 1 x | Sanyo RX Battery Eneloop 4,8 V JR |
| 3 x | Aluminium battery holder red |
| 1 x | Sanyo RX Battery Eneloop 4,0 V AAA JR |
| 1 x | Sanyo TX Battery Eneloop 9,6 V 2500 mAh |
| 3 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
| 2 x | Black 2,4 GHz antenna exit guides (2 pcs) |
| 1 x | Sanyo RX Battery Eneloop RX 4,8 V Futaba |
| 1 x | Antenna holder bracket double |
| 2 x | RX Battery Eneloop 6,0 V JR 2500 mAh |
| 1 x | Bateria LRP 2200-7.2v 6 cell NiMH |
| 2 x | Sanyo TX Battery Eneloop 7,2 V MPX |
| 1 x | Panasonic Eneloop AA 1,2 V battery 19>00 mAh |
| 1 x | White 2,4 GHz antenna exit guides (2 pcs) |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | Pine wood slat 3.0x5.0x1000 mm |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | quality beech plywood BIRCH 600x300x2.0 mm |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | Lite Plywood panel 600x300x3.0 mm |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | Lite Plywood panel 600x300x2.0 mm |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | SE Ring 400 mm (2 pcs) |
| 1 x | White smoke canister 65 g |
| 1 x | "M" set |
| 1 x | Red smoke canister 100 g |
| 1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 2 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | RX external cable for estandar receivers |
| 1 x | Red smoke bombs AX-60 (5 pcs) |
| 1 x | SE Ring 240 mm (2 pcs) |
| 1 x | SE Ring 480 mm (2 pcs) |
| 1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
| 1 x | WingFix ULTRA Black Edition |
| 1 x | Surface Indicator Gauge Small |
| 1 x | Truck-trailer for gliders 720 x 285 mm |
| 1 x | Angle measurer |
| 1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
| 1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
| 1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
| 1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
| 1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
| 1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
| 1 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 2 x | Flap hinge 33x9 mm (6 pcs) |
| 1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
| 1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
| 1 x | Large flex hinge (12 uds) |
| 1 x | Flap hinge (6 pcs) |
| 1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 1 x | Hobbylite Filler, Balsa colour |
| 1 x | F1 Prop Cap Can (Fuel Container Conection) |
| 1 x | Giant Scale Muffler SLIMLINE D.A. 100 (2pcs) |
| 1 x | TX-Tray V1 (L) (Red) |
| 1 x | Pilot "Goose" (Slimline) |
| 1 x | 4Wx2 Power Navigation Light, 13mm, T-Fuse White |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | Balsa panel 6.0x100x1000 mm |
| 1 x | Aluminium wide washer M4 Black (4 pcs) |
| 1 x | Aluminium cap bolt washer M4 green (8 pcs) |
| 1 x | Aluminium wide washer M4 Gold (4 pcs) |
| 1 x | F-16 Scale 1:6 (1.630mm) |
| 1 x | 160 mm carbon undercarriage (2pcs) |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | 40 mm gas motor standoff |
| 1 x | ASPIRE Red ARF 2.000 mm |
| 1 x | F4E Phantom Scale 1:7 |
| 1 x | Smoke set "S" |
| 1 x | Light System |
| 1 x | Pilot "Duke" Legends Series (Slimline) |
| 1 x | 3x8W Triple-Spotlight, 12mm, T-Fuse White |
| 1 x | 16mm Gear-Spotlight, 4W |
| 1 x | Set luces Airliner 2.1m Wingspan Scale 1:14 Civil/Sport |
| 1 x | 8Wx2 Gears-Spotlight, UltraPower, 20mm White |
| 1 x | 8Wx2 Navigation & Strobe, 11mm Green/White |
| 1 x | 8Wx2 Navigation & Strobe, 11mm, T-Fuse Red/White |
| 1 x | 8Wx2 Navigation & Strobe, 11mm Red/White |
| 1 x | Aluminium sheet 500x250x0,5mm |
| 1 x | Foam plastic plates (310x210x2 mm) |
 |
| 12,232.02EUR |
