| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Bec MR UBEC 5A (5v/6v/7v) |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
| 1 x | Head lower part New |
| 1 x | Prolongador S-Bus JR/JR 20cm |
| 1 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | Blade holder upper |
| 1 x | Extension silicon 100 cm (Futaba) |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
| 1 x | Hot Glue Stick BLACK |
| 1 x | SE Ring 200 mm (2 pcs) |
| 1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
| 1 x | Starter 12v (Max 90 and 15ccm) |
| 1 x | Flat washer 1.7 mm (20 pcs) |
| 1 x | Vacuum pump 12 CFM |
| 1 x | |
| 1 x | Vasa model Catapult |
| 1 x | PropCover 16-20" (2 pcs) |
| 1 x | Propeller MEJZLIK 22x10 Electric light (36 g) |
| 1 x | Propeller POWER-PROP 12x6 |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | Futaba male 40 cm extension |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
| 1 x | Autogyro Cierva C30 Spain |
| 1 x | Cabel charger transmitter GRAUPNER |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | Extension silicon 30 cm female (Futaba) |
| 1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 2 x | Steering lever |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Pine wood slat 10x10x1000 mm |
| 1 x | SE Ring HACKER 300 mm (2 pcs) |
| 1 x | Quicklock washer 1 mm (10 pcs) |
| 1 x | Aluminium cap bolt washer M4 green (8 pcs) |
| 1 x | SE Ring 300 mm (2 pcs) |
| 1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
| 2 x | Disposable Injector Bags (30x16cm) 100 pcs |
| 1 x | Aluminium cap bolt washer M3 red (8 pcs) |
| 1 x | Starter Sullivan-STAR 601 |
| 1 x | SE Ring 450 mm (2 pcs) |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
| 1 x | Aluminium cap bolt washer M4 red (8 pcs) |
| 1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
| 1 x | Spring lock washer 4.1 mm (20 pcs) |
| 1 x | Z Bender - S Type Tool |
| 1 x | SE Ring 350 mm (2 pcs) |
| 1 x | SE Ring 400 mm (2 pcs) |
| 1 x | SE Ring 480 mm (2 pcs) |
| 1 x | SE Ring 250 mm (2 pcs) |
| 1 x | Ring 320 mm length (5 pcs) |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Aluminium wide washer M3 red (4 pcs) |
| 1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
| 1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
| 1 x | Anntena Panel 5,8 GHz - 14 dBi |
| 1 x | Head core bushing |
| 1 x | Head spacer |
| 1 x | LA500 pilot-seat set |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | Cabel "Y" 30 cm (graupner) |
| 1 x | Cierva C30 Elevator |
| 1 x | Circlick securite |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | Bearing 3x6x2,5 |
| 1 x | Battery charging cable XT60 |
| 1 x | BEC 3A FOXY |
| 1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Cierva C30 simulated motor |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 1 x | Extension 15 cm (Futaba) |
| 1 x | TrainerCord (master-learner) |
| 1 x | Prolongador S-Bus JR/JR 10cm |
| 1 x | Extension silicon 30 cm male (Futaba) |
| 1 x | Premium servo extension 50cm |
| 2 x | Screws M1,6x6 Allen |
| 1 x | Extension silicon 30 cm female (Graupner) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | Blade holder lower |
| 1 x | Extension silicon 100 cm (Graupner) |
| 1 x | Complet landing gear |
| 1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | Nut M2 securing |
| 1 x | Carbon roving DowAksa / 24k / 1600 tex |
| 1 x | JETImodel SINGLE BEC |
| 1 x | Head upper part |
| 1 x | Tape GFK 50 mm |
| 1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
| 1 x | 1,5x50 mm allen screwdriver |
| 1 x | Lock washer 2.7 mm (20 pcs) |
| 1 x | Flat washer 2.2 mm (20 pcs) |
| 1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | Flat washer 4.3 mm (20 pcs) |
| 1 x | 2,0x50 mm allen screwdriver |
| 1 x | Circlik for shaft 2.3 mm (10 pcs) |
| 1 x | Ball Link Plier |
| 1 x | Circlik for shaft 1.5 mm (10 pcs) |
| 1 x | Hot Glue Stick RED |
| 1 x | Aluminium wide washer M4 Blue (4 pcs) |
| 1 x | SE Ring 240 mm (2 pcs) |
| 1 x | Copier 2x20 cm pcs |
| 1 x | Crimping tool |
| 1 x | Lock washer 2.2 mm (20 pcs) |
| 1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
| 1 x | Digital scale up to 40 kg |
| 1 x | Foil for sticking flaps and ailerons |
| 1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
| 1 x | 20x200 mm battery rings |
| 1 x | Hot Glue Stick GREEN |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Lock washer 4.3 mm (20 pcs) |
| 1 x | Flat washer 2.7 mm (20 uds)pcs) |
| 1 x | SE Ring 360 mm (2 pcs) |
| 1 x | Aluminium wide washer M3 gold (4 pcs) |
| 1 x | Starter Sullivan-STAR 603 DINATRON |
| 1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Aluminium wide washer M4 Gold (4 pcs) |
| 1 x | Digital precision scale up to 2000 g |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Copier 5x20 cm pcs |
| 1 x | Vacuum pump P1-N |
| 1 x | Hexagonal ball head 2.0 x 50 mm |
| 1 x | Tape GFK 38 mm |
| 1 x | Aluminium wide washer M3 blue (4 pcs) |
| 1 x | Waterproof adhesive tape, width 19mm, length 25m |
| 1 x | Quicklock washer 2.5 mm (10 pcs) |
| 1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
| 1 x | Starter EM Gear Power 80 |
| 1 x | Flat washer 3.2 mm (20 pcs) |
| 1 x | Tape GFK 25 mm |
| 1 x | Quicklock washer 1.5 mm (10 pcs) |
| 1 x | Screwdriver for Torx® TX8 |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
| 1 x | Aluminium wide washer M4 Red (4 pcs) |
| 1 x | Cinta Goldfix 1m |
| 1 x | Ball Link Plier |
| 1 x | SE Ring 330 mm (4 pcs) |
| 1 x | Quicklock washer 4 mm (10 pcs) |
| 1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
| 1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
| 1 x | Bungee HLG Premium |
| 1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
| 1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
| 1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
| 1 x | Tail support (2 pcs) |
| 1 x | Screws flush mount M2 |
| 1 x | Tail boom |
| 1 x | Side rudder |
| 1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
| 1 x | Blade holder center |
| 1 x | Rotor Mast |
| 1 x | Bearing housing |
| 1 x | Ball joint long |
| 1 x | Head lower part |
| 1 x | Screw M3x16 |
| 1 x | Steel Screw M1x8 (10 pcs) |
 |
| 5,649.57EUR |
