| 1 x | Windsock Ozone L -1200 mm |
| 1 x | Motor DLE 170 M- Paramotors |
| 1 x | Quicklock washer 1 mm (10 pcs) |
| 2 x | Ball link Aluminio M3 (2 pcs) |
| 1 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 1 x | Aro pasacable Ø25 mm (4 pcs) |
| 1 x | Aluminium wide washer M4 Red (4 pcs) |
| 1 x | Quicklock washer 3.5 mm (10 pcs) |
| 1 x | Xplorer4 anemometro |
| 1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
| 1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
| 1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
| 1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
| 1 x | Xplorer1 anemometro |
| 1 x | Z type of cable coupler Ø 1.8 (2 uds) |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 2 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | Lock washer 3.2 mm (20 pcs) |
| 2 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | One touch canopy lock |
| 2 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
| 1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
| 3 x | USB Mini Camera endoscope |
| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Flat washer 2.2 mm (20 pcs) |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Quicklock washer 3 mm (10 pcs) |
| 1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
| 1 x | Jeti Black cap |
| 1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
| 1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
| 1 x | Aluminium red ball links M3 V1 (10 pcs) |
| 1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | Aluminium wide washer M3 blue (4 pcs) |
| 1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | Flat washer 2.7 mm (20 uds)pcs) |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | Green smoke canister 100 g |
| 1 x | DLA 116 crankshaft |
| 1 x | Parachutist |
| 1 x | Exhaust elbow for SAITO FA65/72/80/82a/91S/100/ |
| 1 x | Reed valve for DA 50-R |
| 1 x | Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5 |
| 1 x | 3l Smoke oil |
| 1 x | Pilot "Adolf" Legends Series (Slimline) |
| 1 x | Straightened threaded rod M2-1m |
| 1 x | Extension Arm for Carburetor (red) |
| 1 x | ABS Strip 1.5x8.0x1000 mm |
| 1 x | Filler Gauges |
| 1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
| 1 x | Piloto Jet "Red" 1/6 Scale |
| 1 x | Propeller Pleg CAM Carbon 11x6 |
| 1 x | Propeller Pleg CAM Carbon 11x10 |
| 1 x | Propeller Pleg CAM Carbon 12.5x7.5 |
| 1 x | Straightened rod Ø 1.5 mm x 1000 mm |
| 1 x | Distanzstück motor OS 120 AX |
| 1 x | Propadapter for motor A50 |
| 1 x | Extension Arm for Carburetor |
| 1 x | Field folding model stand SebArt |
| 1 x | Starter Sullivan-STAR 601 |
| 1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
| 1 x | ABS angle 6,0x6,0x1000 mm |
| 1 x | Red smoke bombs AX-60 (5 pcs) |
| 1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
| 1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
| 1 x | ABS Strip 1.0x5.0x1000 mm |
| 1 x | ABS angle 3,0x3,0x1000 mm |
| 1 x | Remote electric ignition system |
| 1 x | DA 85 / DA 100 / DA 100 L carburetor |
| 1 x | U Profile ABS 1,0x2,0x1000 mm |
| 1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
| 1 x | White smoke canister 100 g |
| 1 x | 1/10 Pilot "Jimmy" |
| 1 x | Adapters for 7.5 - 35cc aircraft and naval engines |
| 1 x | Red smoke canister 100 g |
| 1 x | Double side nipple |
| 1 x | 7.94 x 4.76 mm tygon tube 1 m |
| 1 x | Gasket electric Fuel Pump |
| 1 x | EXTREME FLIGHT BLUE MAGNETIC ROUND FILLER PLUG |
| 1 x | Black "FUEL VENT" round aluminum overflow socket |
| 1 x | Check valve V2 |
| 1 x | double Fuel Dot V2 (silver) |
| 1 x | Electron 22 mm Fitting barb |
| 1 x | Dubro Fuel Tank Cap/Fittings 2-24oz Tanks Gas |
| 1 x | Deposito DUBRO 360 ml - 12 oz |
| 1 x | Extra hard 750 ccm complete gasoline fuel tank |
| 1 x | Electric Fuel pump |
| 1 x | Retract electric landing gear 120 - Viper |
| 1 x | DJI FPV Combo |
| 1 x | Propeller CFK 20x13 "white" |
| 1 x | Propeller CFK 18x19 |
| 1 x | Propeller CFK 14x10 |
| 1 x | Propeller Pleg CAM Carbon 11x7 |
| 1 x | Propeller RF CFK 10x17 |
| 1 x | Propeller CFK 12.5x6.5 |
| 1 x | Propeller Pleg CAM Carbon 10x5 |
| 1 x | Propeller CFK 15x13 Slim |
| 1 x | 1804 2400KV Brushless Motor Qav 250 mini |
| 1 x | Propeller Pleg CAM Carbon 15x6 |
| 1 x | Propeller Pleg CAM Carbon 11x8 |
| 2 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
| 1 x | 40 mm air cylinder |
| 2 x | Cockpit aluminium closing |
| 1 x | Tape GFK 25 mm |
| 1 x | Combo FOXY C3530-570 + FOXY 80 amp |
| 1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
| 1 x | Male connector for 12 pines AWG |
| 1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
| 1 x | Tape GFK 50 mm |
| 1 x | Connectors banna oro 2 mm (M/F) |
| 2 x | Cockpit aluminium closing 4.7g |
| 1 x | Cockpit plastic closing |
| 1 x | Fully Threaded Steel Rod M3 |
| 1 x | Carbon plate 550x350x4.0 mm ECOTECH |
| 1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
| 1 x | Black large kwik link (10 pcs) |
| 1 x | resin-hardener package L-385 with hardener H-385 |
| 1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
| 1 x | Male connector for 10 pines AWG |
| 1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
| 1 x | White aluminium 230 mm landing gear |
| 1 x | XTorque CFK Servohebel 38 HITEC 25T |
| 1 x | Silicone black 1,5 qmm wire ( 25 m) |
| 1 x | XTorque CFK Servohebel 38 |
| 1 x | Silicone red 1,5 qmm wire ( 1 m) |
| 1 x | Threaded coupler M2,5 (10 pcs) |
| 1 x | Boxed KIT OF 7 Rotary Burrs FINE |
| 1 x | Servo GO-1017MG 4.5 kg.cm 0.10s/60º |
| 1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
| 1 x | Servo GO-1023MG 7.0 kg.cm 0.09s/60º |
| 1 x | 1/12 Pilot "Langley" |
| 1 x | 26x12 prop Super Silence |
| 1 x | DLE 55 carburetor |
| 1 x | Suction funnel for carburetor 90D-L (red) |
| 1 x | 1/6 Pilot "Buddy" |
| 1 x | Suction funnel for carburetor DA70- MVVW 190cc (red) |
| 1 x | Strip ABS 2.0x8.0x1000 mm |
| 1 x | Connectors banna oro 0,8 mm (M/F) |
| 1 x | Kwik link AL M3 con Clip (2 pcs) |
| 1 x | Snap for floding prop for 2 mm axi |
| 1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
| 1 x | Locking cable tie 4.6x203 (uds) |
| 1 x | Couple M4 for wire (10 pcs) |
| 1 x | Carburator Moki S 180 |
| 1 x | Kwik link AL M4 con Clip (2 pcs) |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | Carburator Moki S400 |
| 1 x | Pushrod octagone 4/3 |
| 1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
| 1 x | Angled clevis with threaded rod M3 |
| 1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
| 1 x | Split pin 1.6x16 mm (10 uds) |
| 1 x | Hardener Aero EPH 161 (250 g) |
| 1 x | resin-hardener package L-385 with hardener H-385 (875 g) |
| 1 x | Carbon plate 550x350x2.5 mm ECOTECH |
| 1 x | Carbon plate 550x350x1.0 mm ECOTECH |
| 1 x | resin-hardener L-385 H-385 (5000 g) |
| 1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
 |
| 7,846.62EUR |
