| 1 x | Motor DLE 200cc Std |
| 1 x | Small Crow DLE-170M |
| 2 x | Big Crow DLE-170M |
| 1 x | Motor DLE 170 M- Paramotors |
| 1 x | Silent-blocks DLE 170M |
| 1 x | Propeller balancer |
| 1 x | Field folding model stand |
| 1 x | Truck-trailer for gliders 720 x 239 mm |
| 1 x | Field folding model stand SebArt |
| 1 x | Propeller balancer |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | USB HLS prog. interface |
| 1 x | 4 LiPo XH>EH adapter |
| 2 x | Circlick securite |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 2 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 1 x | 2 LiPo XH>EH adapter |
| 2 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 1 x | 30 cm BEC cable (female) |
| 1 x | CM-3 |
| 2 x | CC 05 |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | TrainerCord (master-learner) |
| 1 x | JETImodel SINGLE BEC |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
| 1 x | TP/TopFuel - XH 2/3S Adapter |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | Adapter lead MPX/EC3 |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 1 x | Oracover ROYAL RED 2m |
| 1 x | Oratex Red Fokker 10 m |
| 1 x | Threaded coupler M2 (10 uds) |
| 1 x | Horn 6/27 with M3 Bearing |
| 1 x | Cable control set |
| 1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
| 1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
| 1 x | Tail gear set (60-120 class) |
| 2 x | Motor DLE 200cc Premium Muffler |
| 2 x | Air pressure gauge |
| 1 x | Quick hose connector 4-4 mm |
| 2 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
| 2 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
| 3 x | Mini neumatic retract 3 mm landing gear (Het-rc) |
| 1 x | Angled clevis with threaded rod M3 |
| 1 x | Hacker X-Pro USB interface V2 |
| 2 x | Glass fibre braided sleeve (45mm) roll 10m |
| 1 x | Fiberglass plate 350x150x2.5 mm |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | 1,6x1000 mm 2:1 red termoretract tube |
| 1 x | 460 mm EPP Floats |
| 1 x | Horn mando long (2 pcs) |
| 1 x | 1,2x1000 mm 2:1 red termoretract tube |
| 1 x | Micro control horn (2 pcs) |
| 1 x | Vasa model Catapult |
| 1 x | 4,8x1000 mm 2:1 red termoretract tube |
| 1 x | 12,7x1000 mm 2:1 green termoretract tube |
| 1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 1 x | Squared carbon wing joinner 5x5x220 mm |
| 1 x | Hot Glue Stick RED |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Light System |
| 1 x | Female connector JST SH 1.0mm with 10 cm wire |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 3 x | PVC grid diagonal 290x185x0.32 mm |
| 1 x | CC 01 |
| 1 x | Jet Afterburner Simulator NF-Jet3 YSW |
| 2 x | Connector CAN 15 |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 2 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
| 1 x | LightBox SR |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
| 2 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
| 1 x | NF-2 RC set |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
| 1 x | Fiberglass plate 350x150x1.0 mm |
| 1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
| 2 x | Jet Afterburner Simulator NF-Jet3 RYS |
| 2 x | Peel ply 64 g/m² (plain weave) 150 cm x 10m |
| 1 x | Glass fibre sleeve Ø 20 mm X 20m |
| 1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 1 x | Foam plastic plates (310x210x2 mm) |
| 1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
| 1 x | Kit hydraulic brake |
| 1 x | Set freno para ruedas Dia. 127 mm |
| 1 x | Propeller APC 12x6 Electric |
| 1 x | Propeller APC 10x4.7 SF Pusher |
| 1 x | Propeller APC 13x10 Electric |
| 1 x | GPS Altis |
| 1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
| 1 x | Brake for 140 mm wheels |
| 2 x | 40 mm air cylinder |
| 2 x | Landing gear retract neumatic (Jet Legend) |
| 2 x | Set montaje amortiguador para modelos 8-16 Kg |
| 1 x | Propeller APC 10x3,8 SF |
| 1 x | Propeller APC 10x5 Electric |
| 1 x | Propeller APC 11x4.7 SF |
| 1 x | Propeller APC 12x8 Electric |
| 1 x | 19.5x13 Falcon electric 3-Blade carbon prop (54 g) |
| 1 x | Propeller 3x3 |
| 1 x | Propeller APC 11x7 SF |
| 1 x | Propeller APC 12x8 SF |
| 1 x | Propeller APC 11x10 Electric |
| 1 x | 21x14 Falcon electric carbon prop (64 g) |
| 1 x | Propeller APC 10x7 SF |
| 1 x | Propeller APC 11x5.5 Electric Pusher |
| 1 x | Propeller APC 14x12 Electric |
| 1 x | Propeller APC 10x6 Electric |
| 1 x | Propeller 9x7 SlowFlyer |
| 2 x | Propeller APC 11x4.5 Electric Pusher |
| 1 x | Propeller 10x4,7 SlowFlyer |
| 1 x | Propeller APC 13x4 Electric |
| 1 x | Propeller APC 14x10 Electric |
| 1 x | Propeller APC 11x4.7 SF Pusher |
| 1 x | Propeller APC 11x8.5 Electric |
| 1 x | Propeller APC 13x4 Electric Pusher |
| 3 x | 20,5x14,5 Falcon electric V2 (40 g) |
| 2 x | Combo FOXY C3530-570 + FOXY 80 amp |
| 1 x | Axle for motor A20-S (3 uds) |
| 1 x | Motor A10-7 L 4,4:1 |
| 1 x | Actro 32-3 Heli MAX 5mm |
| 1 x | Motor HP 220/30/A3 P4 5:1 |
| 1 x | PHASOR RACE 2035/2100 2D |
| 1 x | Motor A20-6 XL 10-Pole EVO + 4,4:1 |
| 1 x | Motor A50-10L Turnado V3 Glider |
| 1 x | Motor OS 3820-1200 electric |
| 1 x | Black 2,4 GHz antenna exit guides (2 pcs) |
| 1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
| 1 x | Fod Guard 73x32 mm |
| 1 x | Fod Guard 67x32 mm |
| 1 x | 40 mm servo arm with bearing (2 pcs) |
| 1 x | 2 piece mounting frame |
| 1 x | EWC3 40 cm wing connector |
| 1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 10m |
| 2 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
| 1 x | Fiberglass plate 620x540x0,3 mm |
| 1 x | Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl |
| 2 x | Male connector for 16 pines AWG |
| 1 x | GPS Sensor + Logger OPTronics |
| 1 x | SPARK Switch 5.9v |
| 1 x | USB Adaptor OPTronics |
| 1 x | Extension 5 lipos JST/C - JST |
| 1 x | MultiLog Altimeter |
| 1 x | Axle for motor A30-XL V2 |
| 1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
| 1 x | Jeti Black cap |
| 1 x | Bungee HLG Premium |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
| 1 x | |
| 1 x | Female connector for 12 pines AWG |
| 1 x | Fod Guard 94x32 mm |
| 1 x | Connectors banna oro 4 mm (M/F) |
| 1 x | Combo RAY C3542-1000 + ESC 60A |
| 1 x | Tape GFK 25 mm |
| 1 x | Tape GFK 50 mm |
| 1 x | Partall paste 650 g |
| 1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
| 1 x | Cockpit aluminium closing 5.4g |
| 1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
| 1 x | Fod Guard 83x32 mm |
| 1 x | Male connector for 6 pines AWG |
| 1 x | Male connector for 12 pines AWG |
| 1 x | Fod Guard 94x34 mm |
| 1 x | Cockpit aluminium closing |
| 2 x | Female connector for 16 pines AWG |
| 2 x | Male connector for 10 pines AWG |
| 1 x | Combo FOXY C3530-700 + FOXY 80 amp |
| 1 x | Cockpit plastic closing |
| 2 x | Male connector for 20 pines AWG |
| 1 x | Cargador para AA/AAA Ni-MH & Ni-Cd |
| 1 x | Female connector for 20 pines AWG |
| 1 x | Connectors banna oro 2 mm (M/F) |
| 1 x | Charger ISDT 608AC 200W |
| 1 x | LED blink wire flashing (white - 2pcs) |
| 1 x | 89 mm double servo arm with bearing (2 pcs) |
| 1 x | LED wire (orange - 2pcs) |
| 1 x | LED blink wire flashing (red - 2pcs) |
| 1 x | ASG 32 560 mm |
| 1 x | Glider Ka 7 Red (2540mm) |
| 1 x | PowerBox MERCURY SR2 |
| 1 x | PowerBox MagSensor red connector |
| 1 x | OLED-Display for PowerBox Mercury SRS |
| 1 x | PowerBox iGyro SAT |
| 1 x | Extension for LC-Display 50cm |
| 1 x | Mobile Terminal |
| 1 x | PowerBox DigiSwitch V2 MPX/JR |
| 1 x | PowerBox iGyro SRS |
| 1 x | Electronic switch JETI SP6 0-15v/6A |
| 1 x | Glass fibre braided sleeve (45mm) roll 20m |
| 1 x | EWC6 40 cm wing connector |
| 1 x | Peel ply 95 g/m² (plain weave) 20 mm x 100 m |
| 1 x | EWC3 100 cm wing connector |
| 1 x | Interruptor SPS 70v 60/120A |
| 2 x | PET film Mylar® A 350, 50 cm, roll/ 2 m |
| 2 x | Glass fibre sleeve Ø 20 mm X 10m |
| 1 x | BEC 3A FOXY |
| 1 x | Carbon plate 550x350x1.0 mm ECOTECH |
| 1 x | SIMtransmitter 6 Mode 2 |
| 1 x | Propeller APC 8x6 Electric |
| 1 x | Propeller APC 6x4 Electric |
| 1 x | Propeller APC 6x4 Electric Pusher |
| 1 x | Propeller 9x4,7 SlowFlyer |
| 1 x | Connector Sub-D 2+5 Female |
| 1 x | Interruptor RX/Batterie |
| 1 x | Male connector JST SH 1.0mm with 10 cm wire |
| 1 x | Extension 5 lipos JST - JST/C |
| 1 x | JETImodel Addcap 1640 |
| 1 x | USB Interface REVOLECTRIX for CellPRO 10s |
| 1 x | JETImodel DPS 40 |
| 1 x | Extension 2/3 lipos JST/C |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | Chopped glass fibre strands 0.2 mm |
| 1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 5m |
| 1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
| 1 x | Interruptor SAFET-SWITCH 12HV Twinbatt |
| 1 x | Program Card G2 RAY |
| 1 x | Carbon plate 500x400x2.0 mm ISOTECH |
| 1 x | Buy Perforated film 145 cm / 50 m |
| 1 x | Jet Afterburner Simulator NF-Jet3 RY |
| 1 x | ABS 500 x 400 x 1 mm (white) |
| 1 x | Carbon plate 350x150x4.0 mm |
| 1 x | NF-3X-80 liner Kit |
| 1 x | NF-3XL set |
| 1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
| 1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
| 1 x | PET film Mylar® A 350, 50 cm, roll/ 5 m |
| 1 x | Sheet Depron Aero 1250x800x3 mm |
| 1 x | Peel ply 95 g/m² (plain weave) 100 mm x 100 m |
| 1 x | Tool for entel |
| 1 x | Harness for transmitter JETI DUPLEX |
| 1 x | Jet Afterburner Simulator NF-Jet2 |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Covered closure or fairings |
| 1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | 3,9 mm ZG20-ZG38 servo arm |
| 1 x | 20x15 Falcon electric V2 |
| 1 x | Pick up DA50/100/150 |
| 1 x | Piston ring for DA-150 |
| 1 x | Prop washer for ZG45SL, ZG62/S/SL and ZG74B/ZG80B |
| 1 x | BOSCH spark plug cap for ZG 26SC/SCM, 231SLH, G230RC |
| 1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Propeller APC 12x6 SF |
| 1 x | Propeller APC 11x7 Electric |
| 1 x | Body for landing gear Ø 4 mm |
| 1 x | Propeller 11x4,7 SlowFlyer |
| 1 x | Propeller APC 8x3,8 SF Electric Pusher |
| 1 x | Propeller APC 7x5 Electric Pusher |
| 1 x | Propeller APC 9x4.5 Electric |
| 1 x | 20x13 Falcon electric carbon prop (64g) |
| 1 x | Carbon plate 350x150x3.0 mm |
| 1 x | NF-3m Heli Kit |
| 1 x | Jet Afterburner Simulator NF-Jet1RY Set |
| 1 x | Glass fibre sleeve Ø 20 mm |
| 1 x | ABS 500 x 400 x 1,5 mm (white) |
| 1 x | NF-1 RC set |
| 1 x | ESC RAY G2 R-60SB SBEC |
| 1 x | Lipo RAY 2200 mAh 2s 7.4v 30C |
| 1 x | JETI Counter for DC-16 (Blue) |
 |
| 24,807.17EUR |
