| 2 x | Buy Perforated film 100 cm / 20 m |
| 2 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
| 1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | Carbon fibre sandwich sheet 350x150x3 mm |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | ABS 500 x 400 x 1 mm (white) |
| 1 x | ABS 500 x 400 x 1,5 mm (white) |
| 1 x | ABS 500 x 400 x 2,0 mm (white) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 2 x | Buy Perforated film 100 cm / 10 m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | Buy Perforated film 100 cm / 50 m |
| 1 x | Buy Perforated film 145 cm / 50 m |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | Balsa panel 5.0x100x1000 mm |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | Balsa panel 1.5x100x1000 mm |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 2 x | Beech dowels 2.0 x 1000 mm |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | A/C economy plywood 600x300x6+.0 mm |
| 1 x | BALSA triangular 6x6x1000 mm |
| 1 x | Balsa panel 3.0x100x1000 mm |
| 1 x | Balsa panel 4.0x100x1000 mm |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | A/C quality beech plywood 1520x750x3.0 mm |
| 1 x | Balsa panel 6.0x100x1000 mm |
| 1 x | Balsa panel 1.0x100x1000 mm |
| 1 x | Balsa panel 2.5x100x1000 mm |
| 1 x | Balsa panel 2.0x100x1000 mm |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | A/C quality beech plywood 600x300x0.6 mm |
| 1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Ring 320 mm length (5 pcs) |
| 1 x | SE Ring 250 mm (2 pcs) |
| 2 x | 20x1000 mm Ring Strap Back To Back |
| 2 x | SE Ring 450 mm (2 pcs) |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 3 x | 20x200 mm battery rings |
| 1 x | Tape GFK 50 mm |
| 2 x | SE Ring HACKER 300 mm (2 pcs) |
| 1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
| 1 x | |
| 1 x | SE Ring 300 mm (2 pcs) |
| 1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
| 1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
| 3 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 2 x | Tape GFK 25 mm |
| 3 x | Foil for sticking flaps and ailerons |
| 2 x | SE Ring 360 mm (2 pcs) |
| 1 x | Red smoke canister 100 g |
| 1 x | Red smoke bombs AX-60 (5 pcs) |
| 1 x | 3l Smoke oil |
| 1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
| 1 x | Glass fibre braided sleeve (45mm) roll 10m |
| 1 x | White smoke canister 140 g |
| 1 x | "S" set for boats |
| 1 x | Blue smoke canister 100 g |
| 1 x | PET film Mylar® A 350, 50 cm, roll/ 5 m |
| 1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
| 1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
| 1 x | Sheet Depron Aero 1250x800x3 mm |
| 1 x | Smoke set "S" |
| 1 x | AX-60 starters (5 pcs) |
| 1 x | 12.7 mm 2:1 black termoretract tube |
| 1 x | Monokote BLUE metalizado (1.8x0.65m) |
| 1 x | 4,8x1000 mm 2:1 red termoretract tube |
| 1 x | 12,7x1000 mm 2:1 green termoretract tube |
| 1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
| 1 x | Monokote BLANCO jet (1.8x0.65m) |
| 2 x | 1,2x1000 mm 2:1 black termoretract tube |
| 1 x | Oracover Azul Cielo 2 m |
| 1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
| 1 x | 19 mm 2:1 black termoretract tube |
| 1 x | Oracover CARBON Metalic 1 m |
| 1 x | MYLAR film A350 (1000x500 mm) |
| 1 x | 6,4x1000 mm 2:1 blue termoretract tube |
| 1 x | Oracover Black 10 m |
| 1 x | 2,4x1000 mm 2:1 red termoretract tube |
| 1 x | 6,4x1000 mm 2:1 black termoretract tube |
| 1 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
| 1 x | 1,2x1000 mm 2:1 red termoretract tube |
| 2 x | Oracover Brown 2 m |
| 1 x | 2,4x1000 mm 2:1 green termoretract tube |
| 1 x | 1,6x1000 mm 2:1 red termoretract tube |
| 1 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
| 1 x | ORACOVER Ferrari red (2 m) |
| 1 x | Release wax 250ml |
| 1 x | 500 ml sealer (DOPE) |
| 1 x | Nitroverdu 500 ml |
| 2 x | |
| 1 x | Spray Graphit 33 |
| 1 x | Solvent Plasti Dip 1000 ml |
| 1 x | PARTALL® Hi-Temp Wax, 340 g |
| 2 x | Plasti Dip Liquid Tape 429 ml black |
| 2 x | Painting GHT Lexan Black 150 ml |
| 1 x | Presto SF Light Filler styrene-free (420 g) |
| 1 x | Spray YELLOW Inca Lexan 150ml |
| 1 x | Universal Colour Paste deep black 50 g |
| 1 x | Paint gun for sprays |
| 1 x | Spray adhesive INFUTAC (Clear) 500 ml |
| 1 x | Universal Colour Paste deep black 250 g |
| 1 x | 20 g tin paste |
| 2 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
| 2 x | Spannlack 1000 ml |
| 1 x | Digital Air Speed Sensor And Pitot Tube Set |
| 1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
| 1 x | 18 mm reinforced hinge |
| 1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
| 1 x | Miniature brass strap hinge, 1 m |
| 1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 1 x | 15 mm reinforced hinge |
| 1 x | PIX Hawk with accesories |
| 1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 1 x | Micro flex hinge (12 uds) |
| 2 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 1 x | Medium pin type hinge (12 uds) |
| 1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 1 x | Long pinned hinge (6 uds) |
| 1 x | Long pinned hinge (12 uds) |
| 1 x | |
| 1 x | 3,0x60 mm allen screwdriver |
| 1 x | Mobile Terminal |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 2 x | Tape GFK 38 mm |
| 2 x | SE Ring 350 mm (2 pcs) |
| 1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Spikes Band (5 m) |
| 1 x | SE Ring 480 mm (2 pcs) |
| 1 x | SE Ring 400 mm (2 pcs) |
| 1 x | SE Ring 240 mm (2 pcs) |
| 1 x | Oracover Azul 2 m |
| 1 x | Oracover Black 2 m |
| 1 x | Marker ties (20 pcs) |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | Electric rocket starters (6 pcs) |
| 1 x | "M" set |
| 1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m |
| 1 x | Initior Receiver FRX2 Wireless |
| 1 x | Fibra de vidrio 80 g/m² (5 m x 100 cm) |
| 1 x | Glass fabric 425 g/m² aero,10x1m |
| 1 x | Chopped glass fibre strands 3 mm |
| 1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 10m |
| 1 x | Black smoke bombs AX-60 (5 pcs) |
| 1 x | White smoke bombs AX-3 (10 pcs) |
| 1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m |
| 1 x | White smoke bombs AX-18 (5 pcs) |
| 1 x | Fiberglass 5000x1100 mm 49 g/m² |
| 1 x | Remote electric ignition system |
| 1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m Aero Finish |
| 1 x | SE Ring 330 mm (4 pcs) |
| 1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
| 1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 20m |
| 1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m |
| 1 x | Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav |
| 1 x | 290 mm 8x4 M4 shaft ship |
| 1 x | 38 mm fenders (10 pcs) |
| 1 x | 3 mm Leader (L 100 mm) |
| 1 x | 10 mm portholes (10 pcs) |
| 1 x | 33,0 mm propeller (left propeller) |
| 1 x | 14 mm Portholes for screws (10 pcs) |
| 1 x | 40,0 mm hydro-propeller (left hydropropeller) |
| 1 x | 12 mm dogdrive props |
| 1 x | 290 mm M5 Prop shaft |
| 1 x | Horn 16,5x20 mm (2 pcs) |
| 1 x | Brass control horn M2 large for wire (2pcs) |
| 1 x | Brass control horn M3 short for wire (2 pcs) |
| 1 x | Body for landing gear Ø 3 mm |
| 1 x | Landing gear strap small (4 uds) |
| 1 x | Landing gear clamp for Ø 4 mm (4 uds) |
| 1 x | Nylon threaded block M4 (2 uds) |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | 4 LiPo XH>EH adapter |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | Pine wood slat 5.0x5.0x1000 mm |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | Birch plywood plate 600x300x2.5 mm |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | CC 01 |
| 1 x | Cabel charger transmitter GRAUPNER |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | Antenna Hole Cap V1 (Silver) |
| 1 x | Oracover CHROME 2m |
| 1 x | PPM Encoder Module |
| 1 x | Tube Pitot to PIXHAWK |
 |
| 5,397.71EUR |
