| 1 x | Extinguisher CO2 - 2 Kg |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | BALSA triangular 8x8x1000 mm |
| 2 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | BALSA triangular 10x10x1000 mm |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | Pine wood slat 5.0x5.0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
| 1 x | L-Connector 4.0 mm x 1000 mm |
| 2 x | Profile ABS half cane 2.0x1000 mm |
| 1 x | Profile ABS Square 1 x 1000 mm |
| 1 x | DYNAMOMETER S-1580 |
| 1 x | ABS "T" angle 8.0x8.0x1000 mm |
| 1 x | U Profile ABS 5,0x10,0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
| 1 x | ABS angle 10,0x10,0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
| 2 x | Profile ABS Square 2 x 1000 mm |
| 2 x | ABS "T" angle 6.0x6.0x1000 mm |
| 1 x | U Profile ABS 2,0x4,0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
| 1 x | U Profile ABS 3,0x6,0x1000 mm |
| 2 x | ABS angle 4,0x4,0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
| 1 x | ABS angle 3,0x3,0x1000 mm |
| 1 x | Presto SF Light Filler styrene-free (420 g) |
| 1 x | Spray YELLOW Inca Lexan 150ml |
| 1 x | Spray EC Red 400ml |
| 1 x | Parachute PV6 for F3J |
| 1 x | Paint gun for sprays |
| 1 x | Rescue 1,8m2 / BackPack |
| 1 x | Ballast 700gr OPALE |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 1 x | Paramotor BackPack XXS (without accessories) |
| 1 x | Paramotor BackPack XXS 2 |
| 1 x | Solvent Plasti Dip 1000 ml |
| 1 x | Windsock Ozone L -1200 mm |
| 1 x | Painting GHT Lexan Black 150 ml |
| 1 x | Nitroverdu 500 ml |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 1 x | Horn 5/10 with M2 Bearing |
| 1 x | Small aluminium horn gold (2pcs) |
| 2 x | RH long aluminium horn (2pcs) |
| 2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
| 2 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
| 1 x | Cable control set |
| 2 x | LH long black aluminium horn L31xH30 (2pcs) |
| 2 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Horn 13,5x16 mm (2 pcs) |
| 2 x | Cable with accesories |
| 2 x | Horn 16,5x20 mm (2 pcs) |
| 2 x | 20 mm carbon horn |
| 1 x | Small aluminium horn red (2pcs) |
| 1 x | Horn 6/35 with M3 Bearing |
| 2 x | LH long aluminium horn L31xH30 (2pcs) |
| 1 x | Horn 5/15 with M2 Bearing |
| 2 x | 6 mm aluminium horn with patella |
| 1 x | WingFix ULTRA Black Edition |
| 1 x | Angle measurer |
| 2 x | Medidor ángulos y/o incidencias |
| 1 x | Propeller balancer |
| 2 x | Truck-trailer for gliders 720 x 285 mm |
| 1 x | Angle of incidence meter |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 1 x | Brass ball links BS M3 V1 (10 pcs) |
| 1 x | LOWER TOW HOOK |
| 1 x | Cable S.BUS 3 salidas 300 mm |
| 1 x | Disposable Injector Bags (30x16cm) 100 pcs |
| 1 x | Balsa panel 6.0x100x1000 mm |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | Balsa panel 5.0x100x1000 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | A/C quality beech plywood 1520x750x3.0 mm |
| 1 x | Pine wood slat 10x10x1000 mm |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 2 x | Horn with ball 40x30 |
| 1 x | Horn 6/27 with M3 Bearing |
| 1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
| 1 x | ABS "T" angle 4.0x4.0x1000 mm |
| 1 x | Profile ABS half cane 5.0x1000 mm |
| 1 x | Profile ABS half cane 8.0x1000 mm |
| 1 x | Profile ABS triangular 4.0x1000 mm 90º |
| 1 x | Carbon plate 350x150x1.0 mm |
| 1 x | Profile ABS half cane 4x2.5x1000 mm |
| 1 x | FUTABA 32MZ TRANSMITTER + R7108SB RECEIVER |
| 1 x | Futaba 46 mm servo arm with ball link |
| 2 x | Micro control horn T2 Ø 1 |
| 1 x | Red smoke bombs AX-60 (5 pcs) |
| 1 x | White smoke bombs AX-9 (10 pcs) |
| 2 x | PCARD Wireless System |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Split M1,2x10 (10 pcs) |
| 1 x | Parachutist |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | Triple rod con. 2mm Pushrod (2 pcs) |
| 1 x | Tip wing protector 40x14 (2 pcs) |
| 1 x | Wing bolts M3 Steel screw blue (2 pcs) |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | Blue smoke canister 140 g |
| 1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 1 x | Red smoke canister 65 g |
| 1 x | Horn DUBRO 1/2A |
| 1 x | Futaba 25 mm servo arm with ball link |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
| 1 x | Servo HITEC HS-225 MG |
| 1 x | Brass control horn M4 short for wire (4 pcs) |
| 1 x | Rudder tandem for two Futaba servos |
| 1 x | Hitec 25 mm servo arm with ball link |
| 1 x | Servo MKS HV747 |
| 1 x | 6 mm M3 variable horn |
| 1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
| 1 x | 6 mm blue aluminium threaded horn with patella |
| 1 x | Lipo GENS 2300 6.6v 2s1p Li-Fe Pack emisora |
| 2 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
| 1 x | Small control horn with bearing (2 pcs) |
| 1 x | Servo MKS 6100 DS |
| 1 x | Futaba SBS-02A Air Pressure Telemetry Sensor (FASSTest/T-FHSS) |
| 1 x | Horn mando long (2 pcs) |
| 1 x | Micro control horn (2 pcs) |
| 1 x | Medium extra-strong control horn with bearing 2,8x24 |
| 1 x | Antenna holder bracket double |
| 2 x | Rudder forward 70x28 "type Kato" |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
| 1 x | Hitec 38 mm servo arm with ball link |
| 1 x | Futaba 54 mm servo arm with ball link |
| 1 x | Servo case HS-225MG/225BB/5245MG |
| 1 x | Transmitter Balancer Futaba T-10CG |
| 1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
| 1 x | Servo GO-10S41MG 10.5 kg.cm 0.075s/60º |
| 1 x | FUTABA 6L + R3106 2.4GHz |
| 1 x | Metal gear set for HS81MG/5082MG |
| 1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
| 1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
| 1 x | 46 mm Futaba servo arm tandem with ball link |
| 1 x | Servo GO-1070MG 40 kg.cm 0.10s/60º |
| 1 x | HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program |
| 1 x | Small aluminium horn blue (2pcs) |
| 1 x | Smoke set "S" |
| 1 x | White smoke bombs AX-60 (5 pcs) |
| 1 x | Wheel collar 2 mm Ø (4 uds) |
| 1 x | White smoke canister 65 g |
| 1 x | AX-60 starters (5 pcs) |
| 1 x | Wing bolts M6 Steel screw Red (2 pcs) |
| 1 x | Adaptador equilibrador HITEC (XH) |
| 1 x | 5 mm M2 variable horn |
| 1 x | Horn mando small (2 pcs) |
| 1 x | COPILOT Multiplex |
| 1 x | Servo safety connector (10 pcs) |
| 1 x | Transmitter Balancer Futaba FF9-DX7-JR-Hitec |
| 1 x | Mono-Switch Memory FUTABA |
| 1 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
| 1 x | Swicht F14/FC-16 (3 pos) |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
| 1 x | Brass control horn M2 large for wire (2pcs) |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
| 1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
| 1 x | Brazo servo MKS Metal M3-L:30 (2 pcs) |
| 1 x | Servo GO-1053 MG 20.0kg |
| 1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
| 1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
| 1 x | Horn 20x28,5 mm (2 pcs) |
| 1 x | Brazo servo KAVAN doble aluminio 25T - 2.5" M3 |
| 1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
| 1 x | 6 mm red aluminium threaded horn with patella |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
| 1 x | Futaba 30 mm servo rounded arm |
| 1 x | Servo GO-09 9g |
| 1 x | Futaba Multi-Switch 16 DECODER |
| 1 x | Gear set HITEC HS-311/322/325BB |
| 1 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
| 1 x | Servo Digital HITEC HS-5065 MG |
| 1 x | Small adjustable aluminium control horn with bearing 2,8x15 |
| 1 x | Futaba 17 mm servo arm with ball link HITEC |
| 1 x | Carbon servo arms for HITEC HS 65 (4 pcs) |
| 1 x | Servo HITEC D950 TW |
| 1 x | Servo GO-1013 MG 3.8kg |
| 1 x | Futaba T3PV T-FHSS |
| 1 x | Transmitter GRAUPNER MZ-24 Pro |
| 1 x | White 2,4 GHz antenna exit guides (2 pcs) |
| 1 x | Rudder forward 90x28 "type Kato" |
| 1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
| 1 x | ABS tube 9.0x8.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
| 1 x | ABS tube 16.0x14.0x1000 mm |
| 1 x | ABS tube 6.0x5.0x1000 mm |
| 1 x | ABS tube 3.0x2.0x1000 mm |
| 1 x | ABS tube 7.0x6.0x1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
 |
| 8,487.09EUR |
