| 3 x | ABS tube 20.0x18.0x1000 mm |
| 3 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
| 1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
| 2 x | ABS tube 7.0x6.0x1000 mm |
| 2 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 4 x | ABS tube 3.0x2.0x1000 mm |
| 2 x | ABS tube 16.0x14.0x1000 mm |
| 3 x | ABS tube 7.0x5.0x1000 mm |
| 3 x | ABS tube 6.0x5.0x1000 mm |
| 2 x | ABS tube 14.0x10.0x1000 mm |
| 1 x | ABS tube 8.0x7.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
| 1 x | ABS tube 3.0x1.0x1000 mm |
| 3 x | ABS tube 4.0x2.0x1000 mm |
| 2 x | ABS tube 5.0x4.0x1000 mm |
| 2 x | ABS tube 8.0x6.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
| 3 x | ABS tube 10.0x8.0x1000 mm |
| 1 x | ABS tube 12.0x10.0x1000 mm |
| 4 x | ABS tube 3.0x2.0x330 mm |
| 2 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | CC 03 |
| 2 x | 5 LiPo XH>EH adapter |
| 1 x | CC 01 |
| 1 x | 30 cm BEC cable (male) |
| 2 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 2 x | CC 02 |
| 2 x | 4 LiPo XH>EH adapter |
| 2 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 2 x | Cabel charger transmitter GRAUPNER |
| 2 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 2 x | 30 cm BEC cable (female) |
| 2 x | CM-3 |
| 2 x | TrainerCord (master-learner) |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 2 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Circlick securite |
| 3 x | CC 05 |
| 1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 2 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 3 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | BEC 3A FOXY |
| 1 x | Adapter lead MPX/EC3 |
| 1 x | Horn 5/10 with M2 Bearing |
| 2 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
| 1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
| 1 x | Horn 16,5x20 mm (2 pcs) |
| 2 x | Brass control horn M4 short for wire (4 pcs) |
| 1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
| 1 x | Horn with ball 40x30 |
| 3 x | Small aluminium horn blue (2pcs) |
| 1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
| 1 x | Brass control horn M3 short for wire (2 pcs) |
| 2 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
| 2 x | DYNAMOMETER S-1580 |
| 1 x | Brass control horn M4 short for wire (10pcs) |
| 1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
| 1 x | Horn with ball 55x40 |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Cierre cabina aluminio Ø4, I=10 mm |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 2 x | Locking cable tie 4.6x203 (uds) |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | One touch canopy lock |
| 2 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 1 x | ABS tube 9.0x7.0x1000 mm |
| 2 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
| 1 x | Glases Ace |
| 2 x | ABS tube 18.0x16.0x1000 mm |
| 1 x | Glases Innovation Plus |
| 2 x | ABS tube 4.0x3.0x1000 mm |
| 1 x | CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm) |
| 1 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
| 1 x | Propeller POWER-PROP 13x9 |
| 1 x | Propeller APC 14x8.5 Electric Pusher |
| 1 x | DUPLEX 2.4EX Central Box 210 |
| 1 x | LASER 73" 1.85m (05) PILOT |
| 1 x | Straightened rod Ø 14.0 mm x 1000 mm |
| 1 x | "S" set for planes |
| 1 x | Initior Transmitter FTX2 Wireless |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm) |
| 1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
| 1 x | Cable Cargador FUTABA |
| 1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
| 1 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | Joint with bearing M2,5 22x5,5 |
| 1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | ABS tube 9.0x8.0x1000 mm |
| 2 x | ABS tube 5.0x4.0x156 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
| 1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
| 3 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | DPSI Ampere battery backer |
| 1 x | Three-position switched channel, short |
| 1 x | SPS Remote switch actuator |
| 1 x | MAX BEC 2 |
| 3 x | TP/TopFuel - XH 2/3S Adapter |
| 1 x | SPS 70V 140/280 A |
| 1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
| 1 x | Brass control horn M2 short for wire (2 pcs) |
| 1 x | 5 mm M2 variable horn |
| 1 x | Horn 6/20 with M3 Bearing |
| 1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
| 2 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
| 1 x | Medium extra-strong control horn with bearing 2,8x24 |
| 1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
| 1 x | 11 mm Rubber pads (14 pcs) |
| 1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
| 1 x | Screw-lock connector M2 (2 uds) |
| 1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
| 2 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 2 x | 45 mm rods set for direction control |
| 1 x | Clip fixing for wing (2 pcs) |
| 1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
| 1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
| 1 x | Cockpit plastic closing |
| 2 x | Allen wheel collar M4x4 |
| 1 x | Bec MR UBEC 5A (5v/6v/7v) |
| 2 x | Split pin 1x8 mm (10 uds) |
| 2 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | Landing gear frontal support 29x26x13,5 |
| 1 x | Pushrod greyline 4/3 with coupler M3 |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | 80 mm rods set for direction control |
| 1 x | Snap for floding prop for 2 mm axi |
| 1 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | 45 mm rods + T patellas set for direction control |
| 1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
| 1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
| 1 x | Oracover Black 10 m |
| 1 x | ABS tube 2.0x1.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm) |
| 1 x | Flap hinge 33x9 mm (6 pcs) |
| 1 x | Micro flex hinge (12 uds) |
| 1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
| 1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
| 1 x | Wing Joiner ULTIMATUM 2.0 m |
| 2 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
| 1 x | X-RAY Micro QR (Elevator) |
| 1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
| 1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
| 2 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
| 1 x | Glidder Mü13e (Bergfalke) |
| 1 x | Glider STROLCH |
| 1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
| 1 x | Fiberglass tube 6/4x1000mm |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
| 1 x | Oracover light Grey 2m |
| 1 x | Electric spoiler 185 mm (2 pcs) |
| 1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
| 1 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
| 1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
| 1 x | USB interface ALTIS |
| 1 x | Extension 2/3 lipos JST - JST/C |
| 1 x | FIALA Propeller 19x12 Electric |
| 1 x | ACTIVE ARF Electric 1.995 mm |
| 1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
| 1 x | 13 mm wing servo holder |
| 1 x | Bidule 55 2460 mm Cabina |
| 1 x | Female connector JST SH 1.0mm with 10 cm wire |
| 1 x | Female connector for 6 pines AWG |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | PSC 6 |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | Extension 2/3 lipos JST/C |
| 1 x | Connector CAN 15 |
| 1 x | Extension 5 lipos JST - JST/C |
| 1 x | PSC 5 |
| 1 x | Male connector for 6 pines AWG |
| 1 x | Male Prolonger TP 4/5S |
| 1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | FIALA Propeller 23x8 Electric |
| 1 x | Propeller FIALA 15x8 3-Blade |
| 1 x | 90x75 mm standart servo cover |
| 1 x | ARTIST 1.560 mm |
| 1 x | 57 mm micro-mini servo cover |
| 1 x | 65 mm mini servo cover |
| 1 x | Bidule 111 3000 mm Canopy |
| 1 x | VPP system propeller for AXI VPP motors (spare) |
| 1 x | 30 mm Alu spinner 3 mm pleg. propeller |
| 1 x | 90x60 mm standart servo cover |
| 1 x | Astra wing Joinner (Top Model) |
| 1 x | 50x45 mm micro-mini servo cover |
| 1 x | 20 mm tail wheel for 0,5-1 Kg models |
| 1 x | Charger 220/110v |
| 1 x | 12V Car Adapter |
| 1 x | LH long black aluminium horn L31xH30 (2pcs) |
| 1 x | Mixing tube for double syringes and cartridges (MR 1:1 and 2:1) |
| 1 x | Battery LiFe TopFuel 3100 mAh 4s MTAG 30C |
| 1 x | Battery LiFe TopFuel 3100 mAh 2s MTAG 30C |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
| 1 x | Propeller MENZ-S 15x6 |
| 1 x | ASPIRE Red ARF 2.000 mm, Set Elevators |
| 1 x | F4U CORSAIR MARINES 2360 mm |
| 1 x | Propeller POWER-PROP 16x8 |
| 1 x | Propeller MASTER 5,5x4,5 |
| 1 x | Epoxy 40 min (Hardener). 10Kg |
| 1 x | Cockpit aluminium closing 5.4g |
| 1 x | 38x4,5 mm wires output (2 pcs) |
| 2 x | Fully Threaded Steel Rod M3 |
| 1 x | Split M1,2x10 (10 pcs) |
| 1 x | Window mounting channel 5m |
| 1 x | Landing gear frontal support 25x32x16 |
| 2 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
| 2 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
| 1 x | Pushrod greyline 3/2 with coupler M2 |
| 1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
| 1 x | Tip wing protector 28x10x12 (2 pcs) |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | Short adjustable control horn 3x24 |
| 1 x | Snap pin for micro clevis (10 uds) |
| 1 x | Snap short M2 (10 uds) |
| 1 x | Triple rod con. 2mm Pushrod (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
| 1 x | Pushrod octagone 3/2 |
| 1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
| 1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
| 1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 1 x | Short extra-strong control horn with bearing 2,8x15 |
| 1 x | Allen wheel collar M4x6 |
| 1 x | Propeller MENZ-S 18x6 |
| 1 x | Propeller MENZ-S 19x10 |
| 1 x | Propeller MENZ-S 20x12 |
| 1 x | Propeller MENZ-S 20x6 Pusher |
| 1 x | Propeller MENZ-S 20x12 3 blades |
| 1 x | Electric Landing Gear Trainer Jet Intro |
 |
| 10,325.08EUR |
