| 1 x | 800TVL CMOS camera for FPV |
| 1 x | USB Mini Camera endoscope |
| 2 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
| 1 x | Motor A2212/13T |
| 1 x | Nitroverdu 500 ml |
| 1 x | Solvent Plasti Dip 1000 ml |
| 1 x | Spray adhesive AEROFIX 2 |
| 1 x | Silicone adhesive ELASTOSIL® E4, tube/ 90 ml |
| 1 x | Spray YELLOW Inca Lexan 150ml |
| 1 x | 20 g tin paste |
| 1 x | Release wax 250ml |
| 1 x | Painting GHT Lexan Black 150 ml |
| 1 x | Plasti Dip Liquid Tape 429 ml orange |
| 1 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | ABS tube 5.0x4.0x156 mm |
| 1 x | ABS tube 16.0x14.0x1000 mm |
| 1 x | ABS tube 8.0x6.0x1000 mm |
| 1 x | ABS tube 9.0x7.0x1000 mm |
| 1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
| 2 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 2 x | ABS tube 7.0x6.0x1000 mm |
| 2 x | ABS tube 4.0x2.0x1000 mm |
| 1 x | ABS tube 10.0x8.0x1000 mm |
| 1 x | ABS tube 14.0x10.0x1000 mm |
| 2 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
| 1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
| 2 x | USB HLS prog. interface |
| 1 x | CC 01 |
| 1 x | Bec MR UBEC 5A (5v/6v/7v) |
| 2 x | CM-3 |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 2 x | Dean "T" - Futaba Adapter |
| 2 x | 4 LiPo XH>EH adapter |
| 1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 1 x | JETImodel SINGLE BEC |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | Cabel charger transmitter GRAUPNER |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | TrainerCord (master-learner) |
| 3 x | 30 cm BEC cable (male) |
| 2 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 2 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 2 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 2 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | Canopy Latch |
| 2 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 3 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 2 x | Screw-lock connector M2 (2 uds) |
| 1 x | Covered closure or fairings |
| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Cierre cabina aluminio Ø4, I=10 mm |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 1 x | One touch canopy lock |
| 1 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Carbon fiber flat 1000x3.0x0.5 mm |
| 1 x | Profile ABS half cane 2.5x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
| 1 x | Squared carbon wing joinner 5x5x220 mm |
| 1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
| 1 x | Profile ABS Square 1 x 1000 mm |
| 1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
| 2 x | ABS "T" angle 2.0x2.0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
| 1 x | Carbon fiber rod 10 mm x 1000 mm |
| 1 x | ABS "T" angle 10.0x10.0x1000 mm |
| 1 x | Carbon fiber rod 4.0 mmx1000 mm |
| 1 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | Carbon fiber rod 14 mmx1000 mm |
| 1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
| 1 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | Carbon fiber rod 1.5 mm x 2000 mm |
| 1 x | Carbon fiber rod 5.0 mmx1000 mm |
| 1 x | T-Connector 4.0 mm x 1000 mm |
| 1 x | U Profile ABS 3,0x6,0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
| 1 x | Profile ABS half cane 2.0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | Cross Connector 4.0 mm x 1000 mm |
| 1 x | Carbon fiber rod 3.0 mm x 1000 mm |
| 1 x | Carbon fiber rod 6.0 mmx1000 mm |
| 1 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 1 x | ABS angle 10,0x10,0x1000 mm |
| 1 x | Flat Connector 4.0 mm x 1000 mm |
| 1 x | Carbon fiber rod 1.0 mm x 1000 mm |
| 1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
| 2 x | ABS angle 5,0x5,0x1000 mm |
| 1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
| 1 x | White silicone 0,25 qmm wire (100 m) |
| 1 x | Yellow smoke bombs AX-60 (5 pcs) |
| 1 x | Cabel "Y" 30 cm (graupner) |
| 1 x | PPM Encoder Module |
| 1 x | ABS rectangular profile 10x5.0x1000 mm |
| 2 x | ABS "T" angle 4.0x4.0x1000 mm |
| 1 x | Rubber profile 10-2 mm 2M |
| 1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
| 1 x | Screws flush mount M2 |
| 1 x | Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm) |
| 1 x | Pilot LA 500 |
| 1 x | LA500 tail empennage |
| 1 x | Balls 4 mm |
| 1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
| 1 x | Baal link 4/14/4 (5 pcs) |
| 1 x | Battery plate |
| 1 x | CF tube (L 1000 mm Ø030 mm, Ø26 mm) |
| 1 x | LA500 housing-lower cyclic |
| 1 x | LA500 rotor head shaft |
| 1 x | LA500 nose |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm) |
| 1 x | CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm) |
| 1 x | ABS tube 4.0x3.0x1000 mm |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm) |
| 1 x | Bearing 3x6x2,5 |
| 1 x | Tail support (2 pcs) |
| 1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
| 1 x | Baering 3x8x4 |
| 1 x | Nut M2 |
| 1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
| 1 x | Carbon plate 350x150x3.0 mm |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
| 1 x | Nut M1,6 |
| 1 x | Rudder |
| 1 x | Rotorhead pushrod |
| 1 x | ABS tube 6.0x4.0x1000 mm |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
| 1 x | LA500 cyclic central part |
| 1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
| 1 x | LA500 freewheel bearing |
| 2 x | Carbon tube (L 2000 mm, Ø16 mm, Ø14 mm) |
| 1 x | Head lower part New |
| 1 x | ABS tube 12.0x10.0x1000 mm |
| 1 x | Motor rotor LA-500 |
| 1 x | ABS tube 18.0x16.0x1000 mm |
| 1 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | Pins M connect Multipin connectors AWG 20-24 |
| 1 x | MAX BEC 2 |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Extension 6 lipos XH > EH |
| 1 x | MPS Gas-Cap-Powerswitch |
| 1 x | JETImodel DPS 40 |
| 1 x | Male Prolonger TP 4/5S |
| 1 x | Heli blades angle measurer |
| 1 x | Precision wrench L100 mm |
| 1 x | Horn 5/15 with M2 Bearing |
| 1 x | Cable S.BUS 3 salidas 100 mm |
| 1 x | Interruptor RX/Batterie |
| 1 x | UBEC 6A KAVAN |
| 1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | Prolonguer for Balancer Thunder Power 6S |
| 1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 2 x | DPSI magnetic switch actuator (housing) |
| 1 x | Electronic switch JETI SP6 0-15v/6A |
| 1 x | Long Switch On/Off micro |
| 2 x | SPS 70V 100/200 A |
| 1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | PSC 6 |
| 1 x | Extension 2/3 lipos JST - JST/C |
| 1 x | Extension 5 lipos JST/C |
| 2 x | Servo slow down unit (0,7-14,7 sec ) |
| 1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 1 x | Male connector for 12 pines AWG |
| 1 x | 45 mm rods set for direction control |
| 1 x | EWC3 100 cm wing connector |
| 1 x | Wheel collar 3.5 mm Ø (4 uds) |
| 1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
| 1 x | Opto Gas Engine Kill Switch |
| 2 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
| 1 x | EWC6 40 cm wing connector |
| 1 x | Female connector for 16 pines AWG |
| 1 x | Cockpit latch closing I=10 mm |
| 1 x | MAX BEC |
| 2 x | Tip wing protector 40x14 (2 pcs) |
| 1 x | Control for forward wheel (MINI) |
| 1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
| 1 x | Connector Sub-D 2+5 Male |
| 1 x | Tip wing protector 30x10 (2 pcs) |
| 1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
| 1 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
| 1 x | Pushrod greyline 4/3 with coupler M3 |
| 1 x | U Profile ABS 1,0x2,0x1000 mm |
| 2 x | ABS angle 1.5x1.5x1000 mm |
| 1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
| 1 x | Telemetry JETI |
| 1 x | Tailormade cone A-10 Skymaster |
| 1 x | Turbina X132 H "Compact Version" |
| 1 x | Profile ABS Square 2 x 1000 mm |
| 1 x | Smokelance |
| 1 x | Variable Flow Smoke Pump System |
| 1 x | FIALA Propeller 19x12 Electric |
| 1 x | Propeller POWER-PROP 7x7 |
| 1 x | Telemetria XYCOY adapter |
| 1 x | Turbina X45 H "compact" |
| 1 x | PARTALL® Hi-Temp Wax, 340 g |
| 1 x | Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm) |
| 1 x | Wheel keeper washer |
| 1 x | USB interface ALTIS |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | Cable grommet Ø 3.2 mm (4 uds) |
| 1 x | 3 mm Short Prop Adapter M5 |
| 1 x | Triple rod con. 2mm Pushrod (2 pcs) |
| 1 x | Allen wheel collar M4x4 |
| 1 x | 3,2 mm Prop Adapter M5 |
| 1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
| 1 x | Wheel collar 2 mm Ø (4 uds) |
| 1 x | Wing bolts M3 Steel screw blue (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
| 1 x | Wing bolts M3 Steel screw Red (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
| 1 x | Profile ABS Square 3 x 1000 mm |
| 1 x | Profile ABS half cane 6.0x1000 mm |
| 1 x | U Profile ABS 5,0x10,0x1000 mm |
| 1 x | ABS rectangular profile 12x6.0x1000 mm |
| 1 x | ABS angle 6,0x6,0x1000 mm |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm) |
| 1 x | ABS tube 5.0x3.0x1000 mm |
| 1 x | ABS tube 3.0x2.0x330 mm |
| 1 x | Xplorer1 anemometro |
| 1 x | Fiberglass tube 6/4x1000mm |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
| 1 x | ABS tube 6.0x5.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø8 mm, Ø6 mm) |
| 2 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
| 1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm) |
| 1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
 |
| 8,778.79EUR |
