| 3 x | METEOR 1.000 mm kit |
| 1 x | Big-Malibu XL Roof box with surfboard rack GREY |
| 1 x | Motor DLE 200cc Std |
| 1 x | Motor DLE 200cc Premium Muffler |
| 1 x | Small Crow DLE-170M |
| 1 x | PIT (Aero-Naut) |
| 1 x | Screws flush mount M2 |
| 1 x | Servo Fork |
| 1 x | Baering 3x8x4 |
| 1 x | LA500 freewheel bearing |
| 1 x | Screw M3x16 |
| 1 x | Sebart 2.2 m YELLOW/BLACK (SebART) |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
| 1 x | Epoxy L 40 min. 10 kg (Resin) |
| 1 x | CA Glue (medium) 20g |
| 1 x | Buy Perforated film 100 cm / 20 m |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | Epoxy 40 min (Resin). 25Kg |
| 1 x | Foam wheel Ø 38 mm (2 pcs) |
| 2 x | Reductora IPS 150 DX2BB-BXCS 7:1 |
| 1 x | Servo HITEC D-955 TW Titanium |
| 1 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
| 1 x | Servo HITEC D950 TW |
| 1 x | Servo HITEC HS-5585MH |
| 1 x | Gear set HITEC HS-81 |
| 1 x | Gear set HITEC HS-645MG/5645MG/5685MH |
| 1 x | Screws set for Hitec MG arms servo |
| 1 x | Gear set HITEC HS-56 HB |
| 1 x | Gear set HITEC HS-311/322/325BB |
| 1 x | Epoxy Resin L + Hardener L (40 min) 3.5 Kg (2.5 kg Resin L + 1 k |
| 1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
| 1 x | Epoxy 5 min. 500 g (Hardener) |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
| 1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
| 1 x | Mixing tube for double syringes and cartridges (MR 1:1 and 2:1) |
| 1 x | Epoxy 5 min. 200g |
| 1 x | |
| 1 x | |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | Carbon fiber rod 3.0 mm x 1000 mm |
| 1 x | Epoxy Casting Resin + Hardener "water-clear" (300 min) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 1 x | Carbon fiber rod 2.0 mmx1000 mm |
| 1 x | Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey) |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 2 x | Foaming agent for epoxy resins 200 g |
| 1 x | Epoxy 10 min 190g |
| 1 x | Epoxy 40 min. 4kg (Hardener) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | Epoxy 40 min (Hardener). 1 Kg |
| 1 x | Epoxy Resin HT 2 + Hardener HT 2, kit/ 296 g |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | Epoxy Resin L + Hardener GL 1 (30 min) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
| 1 x | Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs |
| 1 x | Epoxy Resin L + Hardener L (40 min) 1Kg (715g Resin L + 285g Har |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | Carbon fiber rod 1.5 mm x 2000 mm |
| 1 x | Epoxy Resin L + Hardener LT kit/ 895g |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 2 x | Propeller 8x4,3 SlowFlyer |
| 2 x | Reductora IPS 150 DX2BB-CXCS 8,6:1 |
| 1 x | Cooler motor type 280 |
| 1 x | Cooler motor type 150 |
| 1 x | Cooler motor type 300 |
| 3 x | 76 mm light wheels (2 pcs) |
| 2 x | Reductora IPS 150 DX2BB-FXCS 11,8:1 |
| 1 x | Reductora IPS dual-motor 10,7:1 with spinner |
| 1 x | Cooler motor type 400 |
| 2 x | Propeller 3x3 |
| 2 x | Propeller 11x4,7 SlowFlyer |
| 1 x | Propeller 10x4,7 SlowFlyer |
| 1 x | Gear set HITEC D645 MW |
| 1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
| 1 x | 10-15mm Servo Arm |
| 1 x | Servo HITEC HS-325 BB |
| 1 x | 40 mm servo arm with bearing (2 pcs) |
| 1 x | Gear set HITEC HS-125MG/5125MG |
| 1 x | Servo HITEC D85 MG |
| 1 x | Servo HITEC HS-45 HB, servo box |
| 1 x | Servo HITEC HS-45 HB |
| 1 x | Gear set HITEC HS-55 |
| 1 x | Servo HITEC HS-125 MG |
| 1 x | Gear carbonite set HITEC HS-6965 |
| 1 x | 50 mm servo arm with bearing (2 pcs) |
| 1 x | Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox |
| 1 x | Servo BMS-4112 |
| 1 x | Decorative caps, multicoloured |
| 1 x | Canopy Latch |
| 1 x | Distanzstück motor OS 120 AX |
| 1 x | DLE 55 Muffler |
| 1 x | DLE 85/111/120 Crankshaft keyway |
| 1 x | Muffler DLE-120 Left |
| 1 x | DLE 111 Old Crankshaft keyway |
| 1 x | Propeller MEJLIK 23x8 CFK |
| 1 x | FALCON 24X10 CARBON PROPELLER (GAS) |
| 1 x | ULTRA STICK 10 cc ARF |
| 1 x | PITTS CHALLENGER 87″ 2.20m (120cc) 02 ARF |
| 1 x | EDGE 540-A 91" (2310 mm) |
| 1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
| 1 x | Flap hinge 33x9 mm (6 pcs) |
| 1 x | Propeller G-Sonic 20x8 |
| 1 x | Receiver replacement antenna, approx. 85 |
| 1 x | |
| 1 x | DLE Ignition 170M |
| 1 x | Big Crow DLE-170M |
| 1 x | Propeller POWER-PROP 16x8 |
| 1 x | Propeller POWER-PROP 11x9 |
| 1 x | 10x7 tree blades propeller |
| 1 x | FALCON 27X11 CARBON PROPELLER (GAS) |
| 1 x | FALCON 29X9 CARBON PROPELLER (GAS) |
| 1 x | Ball joint long |
| 1 x | SLICK 360-A 104" (2640 mm) |
| 1 x | CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9) |
| 2 x | BULLIT Wing 1095 mm |
| 2 x | BOOMERANG II 40/46 ARF 1.55mm |
| 1 x | Helice APC 14x4 W |
| 1 x | Propeller APC 10x4.7 |
| 1 x | Propeller APC 12x10 Electric |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
| 1 x | Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg |
| 1 x | Carbon roving DowAksa / 24k / 1600 tex |
| 1 x | Fiberglass plate 620x540x0,3 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm) |
| 1 x | Epoxy 40 min (Hardener). 10Kg |
| 2 x | Foam wheel Ø 351 mm (2 pcs) |
| 1 x | Thread locker IC-Loc™ red "high" 10 ml |
| 1 x | Cyano INSTA - CURE™ (225g) |
| 2 x | Propeller 8x4 Electric |
| 1 x | 89 mm double servo arm with bearing (2 pcs) |
| 1 x | Sukhoi 29S 2,6 m,CF landing gear(SebART) |
| 1 x | Blade holder center |
| 1 x | PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF |
| 1 x | SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm |
| 1 x | SLICK 360-B 104" (2640 mm) |
| 1 x | SHOCK CUB 102" 2.600 mm 38-50cc YELLOW (Seagull Models) |
| 1 x | SCANNER 46-55 Sport Scale 1:7 ARF |
| 1 x | DOMINO 46-55 Trainer 1583 mm |
| 1 x | SkyMaxx 1.550 mm (kit) |
| 1 x | TRAINER RC Pilot V2 90" w/r ARF |
| 1 x | PC-6 Pilatus Porter Big "Fredi" (PICHLER) |
| 1 x | Propeller APC 11x6 Glow/Gas |
| 1 x | Propeller APC 11x4.7 SF Pusher |
| 1 x | Propeller APC 12x4.5 MR Electric Pusher |
| 1 x | Propeller APC 10x4.5 MR Electric Pusher |
| 1 x | Propeller APC 10x5 Electric |
| 1 x | Propeller APC 12x10 Glow/Gas |
| 1 x | Propeller APC 10x7 SF |
| 1 x | Propeller APC 10x5.5 MR Electric multirrotor |
| 1 x | Propeller APC 10x4.5 MR |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | Fiberglass 163 g/m² 1m x 10 m (Aero, finish FK 144, plain) |
| 1 x | Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain) |
| 1 x | Cyanocrylate MD GA460 odourless 20g |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | Epoxy Resin L + Hardener L (40 min) 240g (200g Resin L + 40g Har |
| 1 x | Propeller 9x4,7 SlowFlyer |
| 1 x | Thread locker IC-Loc™ blue "medium" 10 ml |
| 1 x | Cyano INSTA - CURE™ (56g) |
| 1 x | Cyano INSTA - CURE+™ (56g) |
| 1 x | Cyano SUPER - GOLD™ (12g) |
| 1 x | Reductora IPS 150 DX2BB-DXCS 9,7:1 |
| 1 x | PC-6 Pilatus Porter Big "Tiger" (PICHLER) |
| 1 x | BULLIT Wing 840 mm |
| 1 x | PARAGON Trainer 46-55 1580 mm |
| 1 x | Cessna SKYLANE T182 1.75m - Seagull Model |
| 1 x | 9x4.7 * 22x12 carbon propeller |
| 1 x | Propeller APC 11x5.5 Electric |
| 1 x | Propeller APC 11x4.5 Electric Pusher |
 |
| 31,828.01EUR |
