| 1 x | Interface Realflight Simulator |
| 1 x | Simulador RealFlight RF-9.5 S (sin emisora) |
| 1 x | RF9 Flight Simulator with Spektrum Controller |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 2 x | Vacuum bag, 1200 mm x 50 m |
| 3 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 3 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 2 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 2 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 2 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 2 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
| 2 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 2 x | Socket head ball link M3 (2 uds) |
| 1 x | Ball link M1.6 (6 uds) |
| 2 x | Ball link M2,5 (10 pcs) |
| 5 x | Ball link M3 (10 pcs) |
| 5 x | M2 5Diam black ball link V2 (2 pcs) |
| 2 x | M3/5Diam metal ball link V3 (2 pcs) |
| 2 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
| 1 x | Long ball link M3 (6 uds) |
| 1 x | Ball link M3 RPA's-UAV's |
| 4 x | M3 Maxi ball link (2 uds) |
| 3 x | M2,5 Diam metal short ball link V3 (2 pcs) |
| 2 x | M3 INDUSTRIAL ball link (2 uds) |
| 1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
| 1 x | Joint with bearing M3 22x5,5 |
| 2 x | 6 mm hexagonal ball link M3 (10 pcs) |
| 1 x | Short ball link M3 (6 uds) |
| 1 x | Joint with bearing M2,5 22x5,5 |
| 2 x | Ball link M3 (10 pcs, flat ball) |
| 2 x | M3 Maxi ball link (2 uds) |
| 3 x | Joint with bearing M2 22x5,5 |
| 2 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
| 2 x | M2,5 5Diam short black ball link V2 (2 pcs) |
| 1 x | AL Axle Shaft 4.0x16 mm (2 uds) |
| 3 x | Landing gear axle Ø 4 mm (2 uds) |
| 1 x | Brass rod Ø 1.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 2.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 4.5 mm x 1000 mm |
| 2 x | SE Ring 330 mm (4 pcs) |
| 2 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | BEC 3A FOXY |
| 1 x | Slave-cable USB Easy Sim |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | LiPo Storage Box Type "P" |
| 2 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
| 2 x | PowerPack 2.5X2 PRO |
| 1 x | LiPo Storage Box Standard 1 Type 1 |
| 2 x | Battery RX JETI LiIon RB 6200 7.2v |
| 1 x | LiIon Battery 3000 mAh 3.3v 15A (2 pcs) |
| 2 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
| 1 x | Aluminium battery holder red |
| 1 x | Styrene plate 320x120x1.0 mm |
| 2 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
| 1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
| 2 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 1 x | Sparkplug ROSSI R8 |
| 1 x | Sparkplug DLE CM6 |
| 3 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
| 1 x | PowerBox Smokepump |
| 3 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Sparkplug 1/4-32 EVO 10GX |
| 1 x | Socket head ball link M3 (2 uds) |
| 3 x | Short ball link M2 (6 uds) |
| 2 x | Spikes Band (5 m) |
| 2 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
| 2 x | SE Ring 450 mm (2 pcs) |
| 2 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 2 x | Ring 320 mm length (5 pcs) |
| 2 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 2 x | 6 mm ball link M3 (10 pcs) |
| 1 x | Long ball link M2 (6 uds) |
| 1 x | Long ball link M1.6 (6 uds) |
| 3 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
| 3 x | Ball link M3 (6 uds) |
| 3 x | M2 5Diam short black ball link V2 (2 pcs) |
| 1 x | Aluminium blue ball links M3 V1 (10 pcs) |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
| 1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
| 1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
| 2 x | SE Ring 480 mm (2 pcs) |
| 1 x | Waterproof adhesive tape, width 19mm, length 25m |
| 1 x | SE Ring 360 mm (2 pcs) |
| 2 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
| 2 x | Tape GFK 25 mm |
| 2 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
| 2 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
| 2 x | Socket head long ball link M3 (2 uds) |
| 1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
| 2 x | Short ball link M1.6 (6 uds) |
| 1 x | Landing gear axle Ø 5 mm (2 uds) |
| 1 x | Styrene plate 320x120x0.5 mm |
| 2 x | Peel ply 93 g/m² (plain weave) 150 cm x 5m |
| 1 x | Glass fibre sleeve Ø 20 mm X 20m |
| 1 x | PVC grid straight 290x185x0.32 mm |
| 1 x | Peel ply 64 g/m² (plain weave) 150 cm x 10m |
| 1 x | PET film Mylar® A 350, 50 cm, roll/ 5 m |
| 1 x | PET film Mylar® A 350, 50 cm, roll/ 2 m |
| 1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
| 1 x | LA500 pre-rotation gear |
| 2 x | Blade holder center GFK 0,5 mm |
| 1 x | Cierva C30 simulated motor |
| 1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
| 1 x | Battery RX JETI LiIon RB 2600 7.2v |
| 1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
| 1 x | PVC grid diagonal 290x185x0.32 mm |
| 1 x | Peel ply 95 g/m² (plain weave) 20 mm x 100 m |
| 1 x | Peel ply 100 g/m² (plain weave) 50 cm x 2m |
| 1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
| 1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
| 1 x | Glass fibre sleeve Ø 20 mm X 10m |
| 1 x | Release film 100 cm x 50 m |
| 2 x | Glass fibre sleeve Ø 20 mm |
| 1 x | Teflon rollers 40 mm x 15 mm Diam. |
| 1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
| 1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
| 1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
| 1 x | Glass fibre braided sleeve (45mm) roll 20m |
| 1 x | LA500 housing-lower cyclic |
| 1 x | Complet landing gear |
| 1 x | LA500 ciclic lever |
| 1 x | Balls 4 mm |
| 1 x | LA500 pre-rotation gear hub |
| 1 x | Head spacer |
| 1 x | Baal link 4/14/4 (5 pcs) |
| 2 x | LA500 pilot-seat set |
| 1 x | Cierva C30 Body Spain |
| 2 x | Head runner |
| 1 x | LA500 rotor head core |
| 2 x | LA500 cyclic central part |
| 1 x | Bearing 3x6x2,5 |
| 2 x | LA500 rotor head shaft |
| 1 x | Battery plate |
| 1 x | Blade holder center |
| 1 x | Grub screw M3x3 shouldered (2 pcs) |
| 1 x | Head lower part New |
| 1 x | Blades 330mm |
| 2 x | Head core |
| 1 x | Head lower part |
| 1 x | Cierva C30 Elevator |
| 2 x | Baering 3x8x4 |
| 1 x | Blade holder lower |
| 1 x | LA500 front gear holder |
| 1 x | Head upper part |
| 1 x | Blue metalic ball link M3/3 azul (2 pcs) |
| 1 x | wire tensioner (blue) |
| 1 x | Threaded coupler M2,5 (10 pcs) |
| 1 x | Turnbuckle M2x29/43 (2pcs) |
| 1 x | Wire easy tensioner (red) |
| 1 x | Small kwik link (10 pcs) |
| 1 x | Ventus 1:4 set of instruments |
| 1 x | 20x200 mm battery rings |
| 1 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | ABS tube 2.0x1.0x1000 mm |
| 1 x | ABS angle 2,0x2,0x1000 mm |
| 1 x | ABS tube 14.0x10.0x1000 mm |
| 1 x | 19.5x13 Falcon electric 3-Blade carbon prop (54 g) |
| 1 x | FESTO Filter 4 mm |
| 1 x | Polyurethan FESTO hose 3x0,5 mm, transparent |
| 1 x | Bujia OS G5 gasolina |
| 1 x | FESTO connector M5 Quick 4 mm |
| 1 x | Sparkplug 1/4-32 |
| 1 x | M2,5 Diam metal ball link V3 (2 pcs) |
| 1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
| 1 x | Turnbuckle M2x22/35 (2pcs) |
| 1 x | Threaded coupler M2 (10 uds) |
| 1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Turnbuckle M2,5x32/48 (2pcs) |
| 1 x | Z type of cable coupler Ø 2 (2 uds) |
| 1 x | Wire easy tensioner (silver) |
| 1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
| 1 x | Z type of cable coupler Ø 1.8 (2 uds) |
| 1 x | Stainless steel 4 m Pull-Pull complet set (max 20 kg) |
| 1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
| 1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
| 1 x | Set clevis for pull-pull (TY13233 & TY13234) |
| 1 x | 10 mm Quick clamp_L (6 pcs) |
| 1 x | Kardan Black (without pinions) |
| 1 x | ABS rectangular profile 10x5.0x1000 mm |
| 1 x | |
| 1 x | ABS Strip 1.0x2.0x1000 mm |
| 1 x | SE Ring 240 mm (2 pcs) |
| 1 x | Foil for sticking flaps and ailerons |
| 1 x | SE Ring 400 mm (2 pcs) |
| 1 x | Tape GFK 38 mm |
| 1 x | ABS "T" angle 6.0x6.0x1000 mm |
| 1 x | ABS Strip 1.5x4.0x1000 mm |
| 1 x | ABS tube 3.0x1.0x1000 mm |
| 1 x | SE Ring 300 mm (2 pcs) |
| 1 x | ABS "T" angle 10.0x10.0x1000 mm |
| 1 x | ABS Strip 1.5x6.0x1000 mm |
| 1 x | ABS Strip 1.5x8.0x1000 mm |
| 1 x | 290x4 mm M4 shaft ship |
| 1 x | ABS tube 12.0x10.0x1000 mm |
| 1 x | ABS I Strip 10x5x1000 mm |
| 1 x | 290 mm M4 7/8x212 mm shaft ship |
| 1 x | ABS Strip 1.5x2.0x1000 mm |
| 1 x | 290 mm M5 Prop shaft |
| 1 x | ABS Strip 1.0x3.0x1000 mm |
| 1 x | SE Ring 350 mm (2 pcs) |
| 1 x | ABS Strip 1.0x4.0x1000 mm |
| 1 x | Marker ties (20 pcs) |
| 1 x | ABS tube 10.0x8.0x1000 mm |
| 1 x | ABS angle 4,0x4,0x1000 mm |
| 1 x | ABS Strip 1.0x5.0x1000 mm |
| 1 x | 270 mm 3/3 mm shaft ship |
| 1 x | 261 mm M4/M4 6.0x4.0 mm shaft ship |
| 1 x | 290 mm M4/M4 6.0x4.0 mm shaft ship |
| 1 x | 20x1000 mm Ring Strap Back To Back |
| 1 x | ABS angle 10,0x10,0x1000 mm |
| 1 x | ABS angle 5,0x5,0x1000 mm |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | ABS "T" angle 2.0x2.0x1000 mm |
| 1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
| 1 x | ABS tube 16.0x14.0x1000 mm |
| 1 x | SE Ring 200 mm (2 pcs) |
| 1 x | Landing gear axle Ø 6 mm (2 uds) |
| 1 x | 20x13 Falcon electric carbon prop (64g) |
| 1 x | Glass fabric 49 g/m² (1,27 x 10 m) |
| 1 x | Glass fabric 390 g/m² (silane, twill) 100 cm x 20m |
| 1 x | AXI 2826/12 V2 |
| 1 x | Adpater for mounting VMKG gearbox in 480 motor |
| 1 x | AXI 2820/12 V2 Long |
| 1 x | 2020/20 frontal part with magnets |
| 1 x | Central support Speed 280 |
| 1 x | Motor mount M |
| 1 x | Size "M" motor holder for class 400 |
| 1 x | Cooler motor type 280 |
| 1 x | Frontal support Speed 280 |
| 1 x | PYRO 700-45 |
| 1 x | KIRA 400-27 |
| 1 x | KIRA 480-43 5,2:1 |
| 1 x | Fan for A60 |
| 1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 1 x | Nut M2 |
| 1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m Aero Finish |
| 1 x | Glass fabric 390 g/m² aero,10x1m |
| 1 x | PHASOR RACE 2035/2100 2D |
| 1 x | AXI 2826/6 V2 |
| 1 x | AXI 2826/8 V2 |
| 1 x | PHASOR RACE 2035/4100 1D |
| 1 x | AXI 2820/8 V2 Long |
| 1 x | Hacker A30-S Radial Set |
| 1 x | 10 mm gas motor standoff |
| 1 x | KIRA 600-17 |
| 1 x | PYRO 600-11 |
| 1 x | KIRA 480-34 |
| 1 x | KIRA 480-38 |
| 1 x | KIRA 600-38 6,7:1 |
| 1 x | KIRA 600-16 |
| 1 x | KIRA 600-30 6,7:1 |
| 1 x | KIRA 600-24 6,7:1 |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 2 x | LA500 housing-upper cyclic |
| 1 x | Rotor Mast |
| 1 x | Rudder |
| 1 x | Raer wall |
 |
| 16,086.99EUR |
