| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | BALSA triangular 10x10x1000 mm |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | Pine wood slat 5.0x5.0x1000 mm |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 2 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | Pine wood slat 10x10x1000 mm |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | Vasa model Catapult |
| 1 x | Ferrita 27x14x7 mm |
| 1 x | Ferrita 17x10x6.5 mm |
| 1 x | Slave-cable USB Easy Sim |
| 1 x | Interface Jack Adapter IKARUS |
| 1 x | EasyFLY Addon |
| 1 x | Aluminium wide washer M4 Blue (4 pcs) |
| 1 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
| 1 x | Aluminium cap bolt washer M3 green (8 pcs) |
| 1 x | Blind nut M4 (4 pcs) |
| 1 x | Aluminium cap bolt washer M3 black (8 pcs) |
| 2 x | Aluminium cap bolt washer M4 blue (8 pcs) |
| 1 x | Aluminium wide washer M3 red (4 pcs) |
| 1 x | Aluminium wide washer M4 Black (4 pcs) |
| 1 x | Blind nut M6 (4 pcs) |
| 1 x | Blind nut M5 (4 pcs) |
| 1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
| 1 x | Cable grommet Ø 4 mm (4 uds) |
| 2 x | SIMtransmitter 6 Mode 2 |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | Straightened rod Ø 8.0 mm x 1000 mm |
| 1 x | Birch plywood plate 600x300x2.5 mm |
| 1 x | A/C quality beech plywood 1520x750x3.0 mm |
| 1 x | Crystal TX 35.010 Ch 61 |
| 1 x | Receiver Crystal 35 Mc/s Ch 62 |
| 1 x | Crystal Universal RX 35.040 Ch 64 |
| 1 x | Motor mount VANQUIST 48" F3A |
| 1 x | Metalic nose for PROJETI |
| 1 x | Mini-Pix Esc 15 Amp |
| 1 x | Pine wood slat 3.0x5.0x1000 mm |
| 1 x | Ferrita con funda |
| 1 x | Servo M2x9/16 screw (4 pcs) |
| 1 x | Tapping Screw M2.2x9.5 (10 pcs) |
| 1 x | Spring lock washer 2.6 mm (20 pcs) |
| 2 x | Spring lock washer 3.1 mm (20 pcs) |
| 1 x | Threaded insert M5 (10 pcs) |
| 1 x | Jet Afterburner Simulator NF-Jet1RY Set |
| 1 x | Servo M2x5/16 screw (4 pcs) |
| 2 x | Lock washer 4.3 mm (20 pcs) |
| 1 x | Spring lock washer 4.1 mm (20 pcs) |
| 1 x | Socket Screw M3x9 mm |
| 1 x | Blind nut M6 (4 pcs) |
| 1 x | Socket Head Screw M2x8 |
| 1 x | Simulador RealFlight RF-9.5 S (sin emisora) |
| 2 x | NF-2 RC set |
| 1 x | Hexagonal Nut M2.5 (10 pcs) |
| 1 x | Lock washer 3.2 mm (20 pcs) |
| 1 x | Tapping Screw M2.2x13 (10 pcs) |
| 1 x | Screw M2x8 (10 pcs) |
| 1 x | Socket Head Screw M2x12 |
| 1 x | NF-1 RC set |
| 1 x | Servo M2x7/16 screw (4 pcs) |
| 1 x | Hexagonal Nut M4 (10 pcs) |
| 1 x | GameCommander USB Universal |
| 1 x | Socket Head Screw M2x5 |
| 1 x | Screw M2x6 (10 pcs) |
| 2 x | Futaba S-Bus Rx/Gyro Link Lead |
| 2 x | TX-Tray V1 (L) (Black) |
| 2 x | Transmitter Balancer Futaba T-10CG |
| 1 x | Decorative caps, multicoloured, short |
| 1 x | Switch Cap M (black) |
| 1 x | Switch Cap M (silver) |
| 1 x | Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M |
| 1 x | Tray for FUTABA 14SG/16SZ |
| 1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
| 1 x | Profile ABS half cane 2.0x1000 mm |
| 1 x | Profile ABS Square 1 x 1000 mm |
| 1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
| 2 x | Profile ABS Square 2 x 1000 mm |
| 2 x | ABS angle 2,0x2,0x1000 mm |
| 1 x | Motor A50-12 L Glider |
| 1 x | Neck strap Double V2 |
| 2 x | Futaba Aero Large Case - Internal Foam |
| 1 x | Motor A30-12 XL Glider |
| 1 x | Backmountset complete A40 |
| 1 x | Motor A50-10L Turnado V3 Glider |
| 1 x | Motor A20-6 XL 10-Pole EVO + 4,4:1 |
| 1 x | Motor A30-14 M V2 6 Poles |
| 1 x | Actro 32-3 Heli MAX 5mm |
| 1 x | Motor A20-20 L EVO |
| 1 x | Motor MVVS 5.6/690 GLIDER |
| 1 x | Axi for MVVS 3.5 Sport |
| 1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
| 1 x | Aluminium cap bolt washer M4 red (8 pcs) |
| 1 x | Jet Afterburner Simulator NF-Jet3 RYS |
| 2 x | NF-3m Heli Kit |
| 1 x | Blind nut M2 (10 pcs) |
| 1 x | Extension for SensorSwitch 30cm |
| 1 x | PowerBox MagSensor red connector |
| 1 x | Extension for SensorSwitch 60cm |
| 1 x | PowerBox OLED display |
| 1 x | Contest-S-Pult-Carbon mc-20/mc-24 |
| 1 x | Tray FUTABA T6K,T10J,T12K,T14SG,T16iZ,T18SZ,T18MZ,T32MZ |
| 1 x | Transmitter Stick Ends V4 Blue- M3 (2 pcs) |
| 1 x | Two-function control switch + button by FUTABA |
| 1 x | SWTU2 switch |
| 1 x | Gracia Maxi ARF, spare wings (Top Model) |
| 1 x | BABY glider (Aero-naut) |
| 1 x | X-RAY Micro QR (Tail Tube) |
| 1 x | ABS angle 1.5x1.5x1000 mm |
| 1 x | ABS "T" angle 2.0x2.0x1000 mm |
| 1 x | ABS angle 10,0x10,0x1000 mm |
| 1 x | Profile ABS triangular 4.0x1000 mm 90º |
| 1 x | Cross Connector 4.0 mm x 1000 mm |
| 1 x | NF-3 RC set |
| 1 x | Flat washer 3.2 mm (20 pcs) |
| 1 x | Quicklock washer 1 mm (10 pcs) |
| 1 x | NF-3XL set |
| 1 x | NF-3X-350 set |
| 2 x | Jet Afterburner Simulator NF-Jet2 |
| 1 x | Jet Afterburner Simulator NF-Jet2YY Set |
| 1 x | Nut for mounting M5 (4 pcs) |
| 1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 |
| 1 x | PowerBox DigiSwitch V2 MPX/JR |
| 1 x | Mobile Terminal |
| 1 x | Interruptor FUTABA FX-MZ (2 Posic. corto) |
| 1 x | Transmitter Stick Ends V1 Red - M3 (2 pcs) |
| 1 x | Three-function control switch by FUTABA |
| 1 x | Futaba S-Bus Rx/Gyro Link Lead |
| 1 x | Tray for FUTABA 18 SZ |
| 1 x | Adap/Exten for Futaba 12-14C |
| 1 x | Transmitter Balancer SPK DX-8 |
| 1 x | Transmitter Stick Ends V2 Red - M3 (2 pcs) |
| 1 x | DINO Glider ARC |
| 1 x | Glider IKARUS |
| 1 x | X-RAY Micro QR (Rudder) |
| 1 x | Q-12 2000 mm Electric |
| 1 x | BABY glider drawings (Aero-naut) |
| 1 x | Glider KNIRPS |
| 1 x | TAKEO 3.6m electric |
| 1 x | Gracia Maxi ARF, bags (Top Model) |
| 1 x | Glidder Mü13e (Bergfalke) |
| 1 x | X-RAY Micro QR (Elevator) |
| 1 x | Glider PIROL |
| 1 x | Glider STROLCH |
| 1 x | X-RAY Micro QR (Fuselage with canopy) |
| 1 x | Astra (Top Model) |
| 1 x | GRAFAS MAXI ARF |
| 1 x | SATORI 2 PRO V C64 F5J |
| 1 x | Gracia (Top Model) |
| 1 x | Grafas ARF 3.0 m (Top Model) |
| 1 x | ABS angle 3,0x3,0x1000 mm |
| 1 x | Profile ABS half cane 4x1000 mm |
| 1 x | Profile ABS Square 4 x 1000 mm |
| 1 x | Rubber profile 8-2 mm 2M |
| 1 x | Jet Afterburner Simulator NF-Jet3 YSW |
| 1 x | ABS rectangular profile 12x6.0x1000 mm |
| 1 x | L-Connector 4.0 mm x 1000 mm |
| 1 x | Profile ABS half cane 3x1000 mm |
| 1 x | Profile ABS Square 3 x 1000 mm |
| 1 x | Rubber profile 6-2 mm 2M |
| 1 x | Aluminium wide washer M3 blue (4 pcs) |
| 1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
| 1 x | Profile ABS half cane 4x2.5x1000 mm |
| 1 x | Profile ABS half cane 8.0x1000 mm |
| 1 x | Flat Connector 4.0 mm x 1000 mm |
| 1 x | Profile ABS triangular 4.0x1000 mm 60º |
| 1 x | Profile ABS half cane 7.0x1000 mm |
| 1 x | ABS "T" angle 10.0x10.0x1000 mm |
| 1 x | Rubber profile 10-2 mm 2M |
| 1 x | Profile ABS half cane 5.0x1000 mm |
| 1 x | L-Connector 1.5 mm x 1000 mm |
| 1 x | Profile ABS half cane 2.5x1000 mm |
| 1 x | Profile ABS half cane 6.0x1000 mm |
| 1 x | ABS "T" angle 6.0x6.0x1000 mm |
| 1 x | ABS angle 6,0x6,0x1000 mm |
| 1 x | ABS angle 4,0x4,0x1000 mm |
| 1 x | ABS "T" angle 8.0x8.0x1000 mm |
| 1 x | ABS rectangular profile 10x5.0x1000 mm |
 |
| 11,234.34EUR |
