| 3 x | Pine wood slat 2.0x2.0x1000 mm |
| 3 x | Trailing edge BALSA 35x8x1000 mm |
| 3 x | Pine wood slat 2.0x10.0x1000 mm |
| 3 x | Walnut wood slat 2.0x2.0x1000 mm |
| 3 x | Pine wood slat 5.0x5.0x1000 mm |
| 3 x | Pine wood slat 10x10x1000 mm |
| 3 x | Liston HAYA 8 x 8 x 1000 mm |
| 3 x | Liston HAYA 10 x 10 x 1000 mm |
| 3 x | Beech dowels 10 mm x 1000 mm |
| 2 x | Pine wood slat 3.0x5.0x1000 mm |
| 3 x | Pine wood slat 3.0x7.0x1000 mm |
| 3 x | Walnut wood slat 3.0x3.0x1000 mm |
| 2 x | BALSA leading edge 8x10x1000 mm |
| 3 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 2 x | BALSA trip 8.0x8.0x1000 mm |
| 3 x | Pine wood slat 6.0x6.0x1000 mm |
| 2 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | BALSA triangular 6x6x1000 mm |
| 1 x | BALSA triangular 8x8x1000 mm |
| 2 x | Linden wood slat 3.0x3.0x1000 mm |
| 3 x | Pine wood slat 3.0x10.0x1000 mm |
| 2 x | BALSA trip 3.0x3.0x1000 mm |
| 4 x | Beech dowels 4.0 x 1000 mm |
| 3 x | Linden wood slat 2.0x2.0x1000 mm |
| 2 x | BALSA trip 2.0x2.0x1000 mm |
| 3 x | Pine wood slat 1.5x3.0x1000 mm |
| 2 x | BALSA triangular 10x10x1000 mm |
| 2 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | Optical RPM Sensor |
| 1 x | ABS Strip 1.5x8.0x1000 mm |
| 1 x | ABS Strip 1.0x2.0x1000 mm |
| 1 x | GameCommander USB Universal |
| 1 x | Strip ABS 2.0x3.0x1000 mm |
| 1 x | Strip 1,5x1,5x330 mm |
| 3 x | Strip ABS 2.0x8.0x1000 mm |
| 1 x | Round Rod 1,0x1000 mm |
| 1 x | ABS I Strip 20x10x1000 mm |
| 2 x | RF9 Flight Simulator with Spektrum Controller |
| 2 x | ABS Strip 1.0x3.0x1000 mm |
| 1 x | Round Rod 1,25x1000 mm |
| 1 x | ABS Strip 1.5x6.0x1000 mm |
| 2 x | Slave-cable USB Easy Sim |
| 1 x | Strip ABS 2.0x10.0x1000 mm |
| 1 x | Round Rod 1,5x1000 mm |
| 2 x | Round Rod 5,0x1000 mm |
| 1 x | Strip 2,0x2,0x330 mm |
| 1 x | Round Rod 3,0x1000 mm |
| 1 x | ABS Strip 1.0x5.0x1000 mm |
| 1 x | Strip ABS 2.0x5.0x1000 mm |
| 2 x | SIMtransmitter 6 Mode 2 |
| 1 x | DYNAMOMETER S-1580 |
| 1 x | Strip 2,5x1,25x330 mm |
| 1 x | ABS Strip 1.5x3.0x1000 mm |
| 1 x | Round Rod 4,0x1000 mm |
| 4 x | Interface Realflight Simulator |
| 2 x | ABS I Strip 10x5x1000 mm |
| 1 x | Interface Jack Adapter IKARUS |
| 2 x | ABS Strip 1.5x2.0x1000 mm |
| 1 x | Motor DLE 200cc Premium Muffler |
| 1 x | Silent-blocks DLE 170M |
| 2 x | Big Crow DLE-170M |
| 1 x | Ball Link Plier |
| 1 x | Glases Aspen |
| 1 x | Cable grommet 9.5 mm (4 uds) |
| 1 x | Adapter 3,0 mm M5 for spinner 30 mm fixed propeller |
| 1 x | 140 mm rods + T patellas set for direction control |
| 1 x | 1/6 Pilot "Garry" |
| 1 x | Round Rod 2,0x1000 mm |
| 2 x | EasyFLY Addon |
| 3 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | EVP Unit for AXI2208/xx and 2212/xx |
| 1 x | 5 mm Prop Adapter M8 |
| 2 x | T-Motor MN705-S Kv125 (pack 2 uds) |
| 1 x | 5 mm Prop Adapter M8 |
| 1 x | 6 mm Prop Adapter M8 |
| 1 x | 3 mm Long Prop Adapter M5 |
| 1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 2 x | Lite Plywood panel 600x300x2.0 mm |
| 1 x | A/C quality beech plywood 600x300x1.5 mm |
| 1 x | OPUS-V / Jet-CC-BF |
| 1 x | Combo KAVAN PRO 3536-1000 + RAY 40 SB |
| 1 x | T-Motor U7-V2.0 Kv420 |
| 1 x | 2.3 mm Adapter for 30 mm spinners |
| 1 x | 3,2 mm Prop Adapter M6 |
| 2 x | TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible |
| 1 x | 3 mm Prop Adapter M6 |
| 2 x | Prop Shaft Adapter 6 mm/M8 "long" 35 mm |
| 1 x | Motor DLE 430 cc - Paramotors |
| 1 x | Motor DLE 170 M- Paramotors |
| 2 x | Spinner NUT M6 |
| 2 x | Blades 330mm |
| 1 x | Simulador RealFlight RF-9.5 S (sin emisora) |
| 1 x | Ball joint long |
| 1 x | Head lower part New |
| 1 x | Balls 4 mm |
| 1 x | Spinner Alumin. fixed propeller 30 mm / 2,3 mm |
| 1 x | Spinner NUT M8x1,25 |
| 1 x | Spinner Alumin. fixed propeller 30 mm / 3,0 mm |
| 1 x | Spinner Alumin. fixed propeller 40 mm / 4,0 mm |
| 1 x | Spinner Alumin. fixed propeller 40 mm / 3,0 mm |
| 1 x | Spinner Alumin. fixed propeller 40 mm / 3,2 mm |
| 1 x | Spinner NUT M5 |
| 1 x | Spinner Alumin. fixed propeller 40 mm / 5,0 mm |
| 1 x | Spinner NUT 1/4x28 |
| 1 x | Head core bushing |
| 1 x | Blade holder center |
| 1 x | Baering 3x8x4 |
| 1 x | Carbon plate 350x150x3.0 mm |
| 2 x | Liston HAYA 3 x 10 x 1000 mm |
| 1 x | Birch plywood plate 600x300x2.5 mm |
| 1 x | Servo Tester |
| 1 x | 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti |
| 1 x | AXI Cooler 41xx |
| 1 x | PH5 adapter for 5mm M8 axi for AXI2820 y 2826 |
| 1 x | Tank GFK Opus/JEt 300 ml |
| 1 x | Plastic wheels 28 mm (2 pcs) |
| 1 x | Spring lock washer 2.6 mm (20 pcs) |
| 1 x | Horn micro type4 Ø 0,5 (2 pcs) |
| 1 x | Tapping Screw M2.9x9.5 (10 pcs) |
| 1 x | Pan Head Screw M2x6 PH |
| 1 x | Landing gear strap small (4 uds) |
| 1 x | Split M1,2x10 (10 pcs) |
| 1 x | Pulley brass 2,5/1 (2 pcs) |
| 1 x | Propadapter for motor A60-V2 |
| 1 x | Propadapter for motor A50 |
| 1 x | Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5 |
| 1 x | TS832 to Gopro AV/Power Cable |
| 1 x | 20x10 BIELA propeller (4-blades) Corsair Scale |
| 1 x | Birch plywood plate 600x300x1.5 mm |
| 2 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 2 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | Lite Plywood panel 600x300x3.0 mm |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | Birch plywood plate 600x300x1.2 mm |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 2 x | Beech dowels 2.0 x 1000 mm |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | PH6 adapter for 6mm M10 AXI for AXI41xx |
| 1 x | 2,3 mm Prop Adapter M6 |
| 1 x | 5 mm Prop Adapter CN-Spinner |
| 1 x | Prop Shaft Adapter 4 mm/M8 "long" 35 mm |
| 1 x | Prop Saver for AXI 22xx/xx |
| 1 x | Radial Mount Set for AXI2814 and AXI2820 V2 |
| 1 x | Profile ABS Square 1 x 1000 mm |
| 1 x | Hexagonal Nut M3 (10 pcs) |
| 1 x | Spring lock washer 3.1 mm (20 pcs) |
| 1 x | Small flex hinge (12 uds) |
| 1 x | Lock washer 4.3 mm (20 pcs) |
| 1 x | Flat washer 2.7 mm (20 uds)pcs) |
| 1 x | Snap long M2 (10 uds) |
| 1 x | Split pin 1.6x16 mm (10 uds) |
| 1 x | Lock washer 2.2 mm (20 pcs) |
| 1 x | Tapping Screw M2.2x65 (10 pcs) |
| 1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
| 1 x | Propeller diller for EME35 and DLE35 |
| 1 x | Tacometer mini ignition RCEXL |
| 1 x | DLA 116 crankshaft |
| 1 x | Propeller POWER-PROP 7x7 |
| 1 x | Propadapter for motor A50-V3 |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | Ball Bearings for motor A60-V2 |
| 1 x | Adapters for 7.5 - 35cc aircraft and naval engines |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | Propeller diller for DLE111 and DA85-150 |
| 1 x | Propeller diller for DLE170 |
| 1 x | Propeller diller for DA50, DLE55 red |
| 1 x | Alu-Cross for Backmount of A60-V2-Backmountmotors |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | Indoor Brushed motor kit |
| 1 x | 22x10 BIELA pusher propeller |
| 1 x | 24x10 4Bl Scale |
| 1 x | 26x16D BIELA 3Bl propeller (3-blades) |
| 1 x | 26x8 BIELA propeller |
| 1 x | 26x12 BIELA 3Bl Pusher propeller |
| 1 x | 24x12 BIELA 3Bl propeller (3-blades) |
| 1 x | 26x18 BIELA propeller |
| 1 x | 16x10 BIELA propeller (3-blades) |
| 1 x | FANTEX 4xx turbina |
| 1 x | Fiberglass motor-holder for electric motors |
| 1 x | Fibreglass-Spinner BS ∅155 x 200 mm |
| 1 x | Ø 28 mm fiberglass motor-holder for electric motors |
| 1 x | BU 131 Jugmann Panel Instrum. frontal |
| 1 x | LO 100 ARC 3.3m |
| 1 x | Ø 40 mm fiberglass motor-holder for electric motors |
| 1 x | Adapter for VASAFAN 55 axi 2,3 mm |
| 1 x | 18 mm reinforced hinge |
 |
| 17,250.96EUR |
