| 1 x | EVP Unit for AXI2208/xx and 2212/xx |
| 2 x | |
| 1 x | Screwdriver for Torx® TX8 |
| 2 x | Starter Sullivan-STAR 603 DINATRON |
| 1 x | Z Bender - S Type Tool |
| 1 x | 2,0x50 mm allen screwdriver |
| 2 x | Copier 5x20 cm pcs |
| 2 x | Hot Glue Stick GREEN |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
| 1 x | Screwdriver for Hexagon 1,27mm |
| 3 x | Crimping tool |
| 1 x | Vacuum pump P1-N |
| 1 x | Crimping tool |
| 2 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
| 1 x | Digital precision scale up to 2000 g |
| 1 x | Ball link M3 (6 uds) |
| 1 x | Short ball link M3 (6 uds) |
| 2 x | Socket head ball link M3 (2 uds) |
| 1 x | Joint with bearing M2,5 22x5,5 |
| 1 x | M3 Maxi ball link (2 uds) |
| 2 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
| 1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
| 1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
| 1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
| 1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
| 2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 1 x | Long pinned hinge (6 uds) |
| 1 x | 18 mm reinforced hinge |
| 1 x | ABS "T" angle 10.0x10.0x1000 mm |
| 1 x | Gold antispark 4 mm plug |
| 1 x | Round Rod 1,5x1000 mm |
| 1 x | ABS tube 3.0x2.0x1000 mm |
| 1 x | Extinguisher CO2 - 2 Kg |
| 1 x | Tube support Ø 6mm (10 pcs) |
| 1 x | Digital scale up to 40 kg |
| 1 x | Propeller 12x6 Falcon electric |
| 1 x | 19.5x13 Falcon electric 3-Blade carbon prop (54 g) |
| 1 x | M2 5Diam short black ball link V2 (2 pcs) |
| 1 x | 20x13 Falcon electric carbon prop (64g) |
| 1 x | Short ball link M1.6 (6 uds) |
| 1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
| 1 x | Blue metalic ball link M3/3 azul (2 pcs) |
| 1 x | M2,5 5Diam short black ball link V2 (2 pcs) |
| 1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
| 1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
| 1 x | Copier 2x20 cm pcs |
| 1 x | 20x15 Falcon electric V2 |
| 1 x | Screwdriver for Torx® TX6 |
| 1 x | 21x14 Falcon electric carbon prop (64 g) |
| 1 x | Ball link M2,5 (10 pcs) |
| 1 x | Starter EM Gear Power 250 |
| 1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
| 1 x | |
| 1 x | Combustible Glow "KAVAN" air/heli 5% nitro |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
| 1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
| 2 x | Foam plastic plates (310x210x5 mm) |
| 1 x | Styrene plate 320x120x1.0 mm |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
| 1 x | Chopped glass fibre strands 3 mm |
| 1 x | PET film Mylar® A 350, 50 cm, roll/ 2 m |
| 1 x | Buy Perforated film 100 cm / 50 m |
| 1 x | Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl |
| 1 x | Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav |
| 1 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
| 1 x | Carbon plate 350x150x2.0 mm |
| 1 x | ABS 500 x 400 x 1,5 mm (white) |
| 1 x | Cierre cabina aluminio Ø4, I=10 mm |
| 2 x | Cockpit plastic closing |
| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 1 x | 50m servo "Premium" wire (white/red/blue) |
| 1 x | 5 line servos wire black (1 m) |
| 1 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
| 1 x | Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm |
| 1 x | Conector JR Servo female (10 pcs) |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
| 1 x | Fresa corte diamante Ø 1.4mm (bola) |
| 1 x | JETImodel Addcap 820 |
| 1 x | Battery charging cable XT60 |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 2 x | Steering arm 16 mm Ø 3 mm |
| 1 x | Cable grommet Ø 3.2 mm (4 uds) |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | Tip wing protector 28x10x12 (2 pcs) |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Covered closure or fairings |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | Glases Aspen |
| 1 x | ABS I Strip 10x5x1000 mm |
| 1 x | Bidule 111 3000 mm |
| 1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
| 1 x | ABS 500 x 400 x 2,0 mm (white) |
| 1 x | Glass fibre sleeve Ø 20 mm X 10m |
| 1 x | PVC grid diagonal 290x185x0.32 mm |
| 1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
| 1 x | Chopped glass fibre strands 3 mm |
| 1 x | Mini Lock Grips 2PCS |
| 1 x | Dremel 3000 130W |
| 1 x | 6 mm hexagonal ball link M3 (10 pcs) |
| 1 x | PROXXON - SAW BLADE (50MM - 20T) (28017) |
| 1 x | Rubber Insert hard, 1 Pcs. |
| 1 x | Starter EM Gear Power 80 |
| 1 x | Fresa corte diamante Ø 2.3mm (bola) |
| 1 x | PROXXON - SAW BLADE OZI/E, 65MM, 160 TOOTH |
| 1 x | FALCON 29X9 CARBON PROPELLER (GAS) |
| 1 x | FALCON 28X10 CARBON PROPELLER (GAS) |
| 1 x | Propadapter for motor A50 |
| 1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
| 1 x | Snap long M2 (10 uds) |
| 2 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | Tip wing protector 40x14 (2 pcs) |
| 1 x | Allen wheel collar M4x6 |
| 1 x | Split M1,2x10 (10 pcs) |
| 1 x | Split pin 1x8 mm (10 uds) |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 1 x | Landing gear frontal support 29x26x13,5 |
 |
| 8,605.84EUR |
