| 1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
| 1 x | ABS angle 10,0x10,0x1000 mm |
| 1 x | Connector CAN 15 |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | ABS angle 2,0x2,0x1000 mm |
| 1 x | XH female balance (3S) connector (2 pcs) |
| 1 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
| 2 x | T-Connector 4.0 mm x 1000 mm |
| 1 x | Silicone 0,50 qmm servos wire Graupner(100 m) |
| 1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
| 1 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | Straightened rod Ø 1.0 mm x 1000 mm |
| 1 x | White silicone 0,25 qmm wire (150 m) |
| 1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
| 1 x | Connectors banna oro 3 mm (M/F) |
| 1 x | DYNAMOMETER S-1580 |
| 1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | ABS tube 18.0x16.0x1000 mm |
| 1 x | L-Connector 1.5 mm x 1000 mm |
| 1 x | ABS angle 3,0x3,0x1000 mm |
| 1 x | ABS angle 6,0x6,0x1000 mm |
| 1 x | XH female balance (5S) connector (2 pcs) |
| 1 x | Straightened rod Ø 3.0 mm x 1000 mm |
| 2 x | Brass rod Ø 1.0 mm x 1000 mm |
| 1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | Liston HAYA 3 x 10 x 1000 mm |
| 1 x | Connectors banna oro 0,8 mm (M/F) |
| 2 x | Straightened rod Ø 1.2 mm x 1500 mm |
| 1 x | Connectors banna oro 6,0 mm (M/F) |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | ABS tube 2.0x1.0x1000 mm |
| 1 x | ABS tube 12.0x10.0x1000 mm |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | Connectors banna oro 4 mm (M/F) |
| 1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
| 1 x | Profile ABS half cane 3x1000 mm |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
| 2 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
| 1 x | Profile ABS Square 2 x 1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
| 1 x | ABS "T" angle 2.0x2.0x1000 mm |
| 1 x | ABS tube 5.0x4.0x1000 mm |
| 1 x | Banna gold connector 2,5 mm (M/F) |
| 1 x | Gold antispark 5,5 mm plug |
| 1 x | Connectors DEANS 4 pins (1 pair) |
| 1 x | Connectors banna oro 3,5 mm (M/F) |
| 1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
| 1 x | 50m servo "Premium" wire (white/red/blue) |
| 1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | 200m servo "Premium" wire (white/red/blue) |
| 1 x | ABS tube 16.0x14.0x1000 mm |
| 1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
| 1 x | 120x60 mm SLH KOVO wheel |
| 1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Propeller POWER-PROP 16x10 |
| 1 x | Propeller POWER-PROP 14x10 |
| 1 x | Propeller POWER-PROP 14x9 |
| 1 x | Propeller electric carbon 10.5x6 |
| 1 x | Silent-blocks DLE 170M |
| 1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
| 1 x | Aluminium blue ball links M3 V1 (10 pcs) |
| 1 x | Aluminium wide washer M4 Blue (4 pcs) |
| 1 x | Motor DLE 200cc Std |
| 1 x | Flybar support metal LAMA |
| 1 x | Carbon blade 3D 230 mm |
| 1 x | Aluminium wide washer M4 Gold (4 pcs) |
| 2 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
| 1 x | Secraft Fuel system v2, red color |
| 1 x | Aluminium wide washer M3 blue (4 pcs) |
| 1 x | Servo Mount S (red) |
| 1 x | Rudder 2_Tray 4~4.5 inch |
| 1 x | Propeller POWER-PROP 7x7 |
| 2 x | Helices DJI Mavic Air 2 STEALTH "Black" (4x Ud) |
| 2 x | Propeller Pleg CAM Carbon 12x5 |
| 1 x | Straightened rod Ø 4.5 mm x 1000 mm |
| 1 x | Straightened rod Ø 2.5 mm x 1000 mm |
| 1 x | GM Propellers Folding propeller Scale 20x13 Carbon white 1 pair |
| 2 x | Propeller Pleg CAM Carbon 14x8 |
| 2 x | Propeller Pleg CAM Carbon 15x8 |
| 1 x | Propeller Pleg CAM Carbon 10x4 |
| 2 x | Propeller Pleg CAM Carbon 10x12 |
| 1 x | Propeller Pleg CAM Carbon 10x7 |
| 2 x | Propeller Pleg CAM Carbon 14x12 |
| 1 x | Propeller Pleg CAM Carbon 14x6 |
| 3 x | Propeller Pleg CAM Carbon 11x5 |
| 2 x | Propeller Pleg CAM Carbon 11x6 |
| 2 x | Propeller Pleg CAM Carbon 12x10 |
| 2 x | Propeller Pleg CAM Carbon 16x13 |
| 2 x | Propeller Pleg CAM Carbon 11x8 |
| 2 x | Propeller Pleg CAM Carbon 14x10 |
| 1 x | Propeller Pleg CAM Carbon 13x6.5 |
| 1 x | Propeller Pleg CAM Carbon 13x10 |
| 1 x | Propeller Pleg CAM Carbon 10x7 Reverse Rotation |
| 1 x | Propeller Pleg CAM Carbon 12x8 |
| 1 x | Propeller Pleg CAM Carbon 10x8 |
| 2 x | Propeller Pleg CAM Carbon 11x10 |
| 2 x | Propeller Pleg CAM Carbon 12x9 |
| 3 x | Propeller Pleg CAM Carbon 12.5x9 |
| 2 x | Propeller Pleg CAM Carbon 12.5x7.5 |
| 1 x | Propeller Pleg CAM Carbon 10x5 |
| 1 x | Propeller Pleg CAM Carbon 13x5 |
| 2 x | Propeller Pleg CAM Carbon 10x6 |
| 2 x | Propeller Pleg CAM Carbon 13x11 |
| 1 x | Straightened rod Ø 1.5 mm x 1000 mm |
| 1 x | Straightened rod Ø 6.0 mm x 1000 mm |
| 1 x | Mould Resin P 10 kg |
| 1 x | EDGE 540-A 74" (1880 mm) |
| 1 x | MEKP Harderner 100 g |
| 1 x | White gelcoat 1 Kg |
| 1 x | Ventus 1:4 set of instruments |
| 1 x | U Profile ABS 3,0x6,0x1000 mm |
| 1 x | wing/fuselage connector for 16 pines AWG 20-24 |
| 1 x | Turbine KingTech K30G Restart |
| 1 x | KingTech T-Modul 5 in 1 Telemetry |
| 1 x | Ferrita 17x10x6.5 mm |
| 1 x | Sukhoi 29S 2,2 m V2 CLASSIC BLUE (SebART) |
| 1 x | resin-hardener package L-385 with hardener H-385 (875 g) |
| 1 x | PH5 adapter for 5mm M8 axi for AXI2820 y 2826 |
| 1 x | 12V Car Adapter |
| 1 x | resin-hardener package L-385 with hardener H-385 (3.5 Kg) |
| 1 x | Sukhoi 29S 2,6 m Yellow/Black (SebART) |
| 1 x | EXTRA NG 74" white/red/blue (Skywing RC) |
| 1 x | Jun-Si iCharger 4010 Duo |
| 1 x | U Profile ABS 5,0x10,0x1000 mm |
| 1 x | ABS "T" angle 8.0x8.0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
| 1 x | Profile ABS Square 1 x 1000 mm |
| 1 x | 5 mm Prop Adapter M8 |
| 1 x | wing/fuselage connector for 12 pines AWG 20-24 |
| 1 x | 3 mm Long Prop Adapter M5 |
| 1 x | 5 mm Prop Adapter M6 |
| 1 x | 3 mm Short Prop Adapter M5 |
| 1 x | Fuel Fittings-Blue |
| 1 x | AL Axle Shaft 4.0x16 mm (2 uds) |
| 1 x | Electric Landing Gear ULTIMATUM 3.0 (Elektron Re |
| 1 x | ProgBox PRO LCD Hobbywing |
| 1 x | PowerBox MicroSwitch |
| 1 x | Combo KAVAN C3536-1250 + KAVANA R50SB + |
| 1 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
| 1 x | Battery LiFe -1450/25C-3S 9.9V |
| 1 x | Turbina KINGTECH K120 G4 |
| 1 x | KingTech K45TP G4 Turboprop |
| 1 x | Exhaust K45TP |
| 1 x | SWTU2 switch |
| 1 x | MAX BEC 2D plus EX |
| 1 x | Turbina JetsMunt M166TS |
| 1 x | MPS Gas-Cap-Powerswitch |
| 1 x | Magnetic Interruptor MULTIPLEX |
| 2 x | Rubber bushing with bracket "B" type (2 pcs) |
| 1 x | Floating M3 washer pad (36 pcs) |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | Wing bolts M3 Steel screw Red (2 pcs) |
| 1 x | Transmitter Balancer Futaba FF9-DX7-JR-Hitec |
| 1 x | U Profile ABS 8,0x4,0x1000 mm |
| 1 x | Propeller RABOESCH M3 50 mm (3 Blades pr) (Left hydropropeller) |
| 1 x | Rigid coupling brass Ø 4 mm L: 25 mm |
| 1 x | Propeller RABOESCH M4 30 mm (3 Blades) (Left hydropropeller) |
| 1 x | 261 mm M4/M4 6.0x4.0 mm shaft ship |
| 1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
| 1 x | Motor KAVAN PRO 2225-1600 |
| 1 x | ANGEL 48" pp orange/black/white |
| 1 x | LASER 260 60" V2 ARF Yellow (SkyWing) |
| 1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Receptor CORE PBR-26XS 26ch |
| 1 x | Servo GO-1023MG 7.0 kg.cm 0.09s/60º |
| 1 x | Coupling for 4 mm axis |
| 1 x | Switch Cap L (black) |
| 2 x | Super Light Wheels(Sponge Tyre) Ø 50mm x 19mm (2pcs) axis Ø 3.5m |
| 2 x | TS832 to Gopro AV/Power Cable |
| 2 x | DUBRO - 102MM / 4" DIA BIG WHEELS (400RV) - 2PCS |
| 1 x | DJI Mavic Air Fly More Combo |
| 1 x | Carbon plate 350x150x3.0 mm |
| 1 x | Propeller Pleg CAM Carbon 17x13 |
| 1 x | Propeller Pleg CAM Carbon 8x6 |
| 1 x | Propeller Pleg CAM Carbon 8x7 |
| 1 x | Spare spinner 36 mm 3-Bl |
| 1 x | Spare white 36-38 mm spinner |
| 1 x | Propeller Pleg CAM Carbon 15x10 |
| 1 x | Spinner propeller pleg. 40 mm / 3,0 mm |
| 1 x | Spinner Alumin. propeller pleg. 40 mm / 3,0 mm |
| 1 x | Propeller Pleg CAM Carbon 11x7 |
| 1 x | Single rim type C3 36/33,5/18,5 mm (pneumatics 55-70 mm) |
| 1 x | Wheel 75 mm with electromagnet and brake disk (2 uds) |
| 1 x | Wheel FEMA 152 mm / 8 mm |
| 1 x | Nose wheel 62 mm |
| 1 x | Wheel FEMA 82 mm / 5 mm |
| 1 x | 4" - 102 x 45 mm Ø5 mm aluminium core wheel |
| 1 x | TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible |
| 1 x | Wheel 115 mm with electromagnet and brake disk (2 uds) |
| 1 x | Super Light Wheels(Sponge Tyre) Ø 65mm x 19mm (2pcs) axis Ø 3.5m |
| 1 x | 127x43 Ø6.0 mm aluminium core wheel |
| 1 x | Foam wheel Ø 351 mm (2 pcs) |
| 1 x | 60x25 mm tail wheel "type F3A" |
| 1 x | 2.5 inch aluminium core wheel (1 pcs) |
| 1 x | Propeller Pleg CAM Carbon 9.5x7 |
| 1 x | Propeller Pleg CAM Carbon 16x8 |
| 1 x | Propeller Pleg CAM Carbon 7x4.5 |
| 1 x | Spare white 38-45 mm spinner |
| 1 x | Central piece 52 mm + 5º |
| 1 x | 42 mm white plastic spinner for folding propeller |
| 1 x | CN-Spinner propeller pleg. 36 mm / 6 mm |
| 1 x | Propeller Pleg CAM Carbon 12.5x6 |
| 1 x | Central piece 62 mm 0º |
| 1 x | Spinner propeller pleg. 40 mm / 3,0 mm |
| 1 x | XPower H PROP HUB Ø6.0/42.5mm 0º |
| 1 x | Propeller Pleg CAM Carbon 11x4 |
| 1 x | Wheel FEMA 165 mm / 8 mm |
| 1 x | Wheel FEMA 178 mm / 8 mm |
| 2 x | Wheel FEMA 140 mm / 6 mm |
| 1 x | 69x25 mm (2.75") axle Ø4 mm aluminium core wheel |
| 1 x | Wheel 22 mm |
| 1 x | 76x23 Ø3.5 mm aluminium core wheel |
| 1 x | P 17×5.8 Prop-2PCS/PAIR |
| 1 x | Wheel 28 mm |
| 1 x | Wheel FEMA 112 mm / 6 mm |
| 1 x | Wheel 115 mm with electromagnet and brake disk + E-Brake (2 uds) |
| 1 x | Wheel Ø 90 mm (1 ud) Electron Retracts |
| 1 x | Super Light Wheels (Sponge Tyre) Ø 60mm x 19 mm (2pcs) axis Ø 3. |
| 1 x | Super Light Wheels(Sponge Tyre) Ø 55mm x 19mm (2pcs) axis Ø 3.5m |
| 1 x | DUBRO - CUB WHEELS (1/3 SCALE) (558TLC) - 2PCS |
| 1 x | DJI FPV Combo |
| 1 x | Bateria DJI Mini 2 2250 mAh |
| 1 x | T-Motor U7-V2.0 Kv420 |
| 1 x | Propeller Pleg CAM Carbon 17x8 |
| 1 x | Propeller Pleg CAM Carbon 18x7 |
| 1 x | Propeller Pleg CAM Carbon 17x11 |
| 1 x | Propeller Pleg CAM Carbon 6x3 |
| 1 x | Propeller Pleg CAM Carbon 8x4 |
| 1 x | Propeller Pleg CAM Carbon 8x4.5 + Spinner |
| 1 x | Propeller Pleg CAM Carbon 20x10 |
| 1 x | Propeller Pleg CAM Carbon 9.5x5 |
| 1 x | Propeller Pleg CAM Carbon 8x5 Reverse Rotation |
| 1 x | Propeller Pleg CAM Carbon 7x4 |
| 1 x | Propeller Pleg CAM Carbon 7x4.5 + Spinner |
| 1 x | Propeller Pleg CAM Carbon 9.5x5 Reverse Rotation |
| 1 x | Propeller Pleg CAM Carbon 18x13 |
| 1 x | Central piece 52 mm - 2,5º |
| 1 x | 40 mm black plastic spinner for fixed propeller |
| 1 x | Central piece 42 mm 0º [12 mm] |
| 1 x | Spare spinner 40/42 mm 3-Bl |
| 1 x | entral piece 3Bl 42 mm 0º |
| 1 x | Spinner 3BL propeller pleg. 36 mm / 4,0 mm |
| 1 x | Propeller Pleg CAM Carbon 14x9 |
| 1 x | Central piece 42 mm - 2,5º |
| 1 x | Central piece 52 mm - 5º |
| 1 x | 50 mm white plastic spinner for folding propeller |
| 1 x | Central piece 52 mm + 2,5º |
 |
| 27,214.25EUR |
